pax_global_header00006660000000000000000000000064132270040420014504gustar00rootroot0000000000000052 comment=35e3979639e1baa61f9087d776c945a448e8d846 ttylog-0.31/000077500000000000000000000000001322700404200127515ustar00rootroot00000000000000ttylog-0.31/CMakeLists.txt000066400000000000000000000033031322700404200155100ustar00rootroot00000000000000# ########## Project setup ########## PROJECT(ttylog) CMAKE_MINIMUM_REQUIRED(VERSION 2.8) SET(TTYLOG_VERSION_MAJOR "0") SET(TTYLOG_VERSION_MINOR "31") SET(TTYLOG_VERSION_PATCH "0") SET(TTYLOG_VERSION ${TTYLOG_VERSION_MAJOR}.${TTYLOG_VERSION_MINOR}.${TTYLOG_VERSION_PATCH}) configure_file( "${PROJECT_SOURCE_DIR}/config.h.in" "${PROJECT_BINARY_DIR}/config.h" ) # ######### General setup ########## INCLUDE_DIRECTORIES( ${CMAKE_SOURCE_DIR} ${PROJECT_BINARY_DIR} ) # ######### Build defaults ########## SET(CMAKE_C_FLAGS "${CMAKE_C_FLAGS} -Wall -O2") # ########## ttylog executable ########## # Sources: SET(ttylog_executable_SRCS ttylog.c ) # Headers: SET(ttylog_executable_HDRS ) # actual target: ADD_EXECUTABLE(ttylog ${ttylog_executable_SRCS}) # link against librt: if(UNIX AND NOT APPLE) target_link_libraries(ttylog rt) endif() # add install targets: INSTALL(TARGETS ttylog DESTINATION sbin) # add install man page: INSTALL(FILES ttylog.8 DESTINATION share/man/man8) # ######### Test Settings ######### include(CTest) add_test (ttylogRuns ttylog) set_tests_properties (ttylogRuns PROPERTIES PASS_REGULAR_EXPRESSION "no params.") add_test (ttylogHelp ttylog -h) set_tests_properties (ttylogHelp PROPERTIES PASS_REGULAR_EXPRESSION "Usage:") # ######### Package creation ######### SET(CPACK_PACKAGE_VERSION_MAJOR "${TTYLOG_VERSION_MAJOR}") SET(CPACK_PACKAGE_VERSION_MINOR "${TTYLOG_VERSION_MINOR}") SET(CPACK_PACKAGE_VERSION_PATCH "${TTYLOG_VERSION_PATCH}") SET(CPACK_PACKAGE_VERSION "${TTYLOG_VERSION}") SET(CPACK_SOURCE_GENERATOR "TBZ2") SET(CPACK_SOURCE_PACKAGE_FILE_NAME "${CMAKE_PROJECT_NAME}-${CPACK_PACKAGE_VERSION}") SET(CPACK_SOURCE_IGNORE_FILES "/build/;/.git/;/.svn/;") INCLUDE(CPack) ttylog-0.31/COPYRIGHT000066400000000000000000000023001322700404200142370ustar00rootroot00000000000000 ttylog - TTY logger Copyright (C) 1999-2002 Tibor Koleszar Copyright (C) 2008-2018 Robert James Clay Copyright (C) 2017-2018 Guy Shapiro Copyright (C) 2016 Donald Gordon Copyright (C) 2016 Alexander (MrMontag) Fust Copyright (C) 2016 Logan Rosen This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See th GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. Tibor Koleszar H-7400 Kaposvar, Somssich Pal str. 4. Robert James Clay ttylog-0.31/ChangeLog000066400000000000000000000205121322700404200145230ustar00rootroot00000000000000 2018-1-14 Robert James Clay 0.31 * README.md: Use single quotes around 'kill -HUP nnnn' example. * README.md, ttylog.c: Add missing '[-s|--stamp]' entry for the Usage line. * COPYRIGHT, ttylog.c: Add copyright information for Guy Shapiro. * CMakeLists.txt: Change the minimum required version of CMake to '2.8'. * CMakeLists.txt: Add settings for two very basic tests to CMakeLists.txt. * CMakeLists.txt: Move CPack settings to the end of the CMakeLists.txt file. * ttylog.c: Update copyright information for the 'version' option. 2018-1-14 Guy Shapiro * ttylog.c: Make the timestamp function optional instead of default. 2017-12-22 Robert James Clay 0.30 * COPYRIGHT, ttylog.c: Add copyright information for Donald Gordon. 2017-12-21 Guy Shapiro * ttylog.c: exit on unreadable file descriptor 2016-9-21 Donald Gordon * ttylog.c: Added a timestamp option for output lines. 2016-6-16 Robert James Clay 0.29 * COPYRIGHT, ttylog.c: Add copyright information for Logan Rosen. * ttylog.c: Add an extra line feed at the end of the '-v' option printout. * ttylog.c: Implement portability for setting the baud rate. Resolves ticket https://sourceforge.net/p/ttylog/patches/2/. Thanks for the patch goes to Mats Erik Andersson . * LICENSE: Rename the 'LICENCE' file as 'LICENSE'. 2016-6-14 Logan Rosen * CMakeLists.txt: Properly link against librt. 2016-6-04 Robert James Clay * README.md: Minor edits to content of file. 2016-6-03 Robert James Clay 0.28 * Release as ttylog version v0.28. 2016-6-02 Robert James Clay * README.md: Add Usage, Code, Support, and other information. * ttylog.8: Add information to the SYNOPSIS section. 2016-6-01 Robert James Clay * ttylog.c: ttylog.8: Rewrite description of the '-t|--timeout' option. * ttylog.c: Remove the '-r|--raw' command line option, at least for now. * ttylog.8: Add SYNOPSIS and edit the DESCRIPTION & OPTIONS sections. 2016-5-30 Robert James Clay * ttylog.c: Include the changes for ttylog.c from the patch associated with Debian bug # 739733, thus closing the bug. The changes were intended to: - Fix extra newlines being added to output. - Fix dropping of lines at high baud rates. - Fix dropping of first input line. Thanks to Doug Brunner . * ttylog.c: Update copyright infomation presented by '--version' option. * COPYRIGHT: Update copyright years for jame@rocasa.us and add information for alexander.fust.info@gmail.com. 2016-5-25 Alexander (MrMontag) Fust 0.27 * CMakeList.txt: Finalize and activate the CPack directives 2016-5-13 Robert James Clay * ttylog.c: Remove extraneous character at line 130. * config.h.in: Remove extraneous character at line 3. * ttylog.c: Update the copyright lines for the current authors. 2016-4-17 Alexander (MrMontag) Fust * ttylog.c: bug-fixes and improvements for the new '-t' & '-r' options. * CMakeList.txt: CPack directives deactivated by commenting them out. 2016-4-09 Alexander (MrMontag) Fust * CMakeList.txt, config.h.in, ttylog.c: Improve the CMake configuration. 2016-4-05 Alexander (MrMontag) Fust * ttylog.c, ttylog.8: New 'raw' option added, as '-r' or '--raw'. * ttylog.c, ttylog.8: Change the '-t' long option from '--time Seconds to run' to '--timeout Time to run'. 2016-4-04 Alexander (MrMontag) Fust * ttylog.8, ttylog.c: New 'time' option added, as '-t' or '--time'. * CMakeList.txt: Change the setting of C_FLAGS and add CPACK related directives. 2015-6-03 Robert James Clay 0.26 * ttylog.c: Correct truncating of modem_device string, implementing ttylog patch #3 (thanks to Daniel Flinkmann). Closes Debian Bug #731086. * ttylog.c: Rewrite the "-h|--help" option code, including the expansion of the "Usage:" line. * ttylog.c: Rewrite the '-v|--version' option code, including the addition of the License and Copyright information. * ChangeLog: Correct bad date entry for v0.1.b-3. 2014-7-29 Robert James Clay * ttylog.8: Rewrite the '-f --flush' option description in ttylog.8. 2013-6-19 Robert James Clay * README.md: Add initial version of the README.md file. 2013-2-14 Robert James Clay 0.25 * ttylog.c: Corrections to the code adding a NULL to modem_device variable. * CMakeLists.txt: Change CMAKE_C_FLAGS default settings to be Debug build settings by adding them to CMAKE_C_FLAGS_DEBUG instead. 2013-2-14 Robert James Clay 0.24 * ttylog.c: Cleanup of tabs and whitespace. * ttylog.c: Ensure that the modem_device variable is NULL terminated before being used. 2013-2-14 Robert James Clay 0.23 * Correct how CMAKE_C_FLAGS is getting set in CMakeLists.txt. 2013-2-13 Robert James Clay 0.22 * Change the ttylog build system to use CMake. * Add an INSTALL file with information about the CMake based build system. Include the legacy Makefile as a separate section in the file. 2013-1-29 Robert James Clay 0.21 * Do not explicitly define the CC variable in the Makefile. * Add the CPPFLAGS variable to object build line in the Makefile. * Change CFLAGS to LDFLAGS in the executable build line in Makefile. 2013-1-29 Robert James Clay 0.20.0 * Change the version numbering scheme to 'm.n.p'; where "m" is the major version number, "n" is the minor version number, and "p" is a patch version number. Set this version as v0.20.0, derived by mapping the old versions to new minor versions starting from 0.1.0 and counting bug fixes as separate minor versions. For details see ttylog bug # 5, which this closes. 2013-1-21 Robert James Clay 0.1.f * Use standard variable CFLAGS instead of C_ARGS in the Makefile and change how it is initially set there. * Fix issue where ttylog did not test length of device. Bug # 553945 reported in Debian regarding an issue where ttylog does not check the length of the device name, which caused a segfault if the name was too long. Reference also ttylog bug # 3. 2012-09-25 Robert James Clay 0.1.e * Add missing '-f' option information to ttylog man page. 2011-02-16 Robert James Clay 0.1.d * Corrected a misspelling of the word 'version' in ttylog.c. * Change to using jame@rocasa.us for my email address. * Corrected the FSF mailing address in the COPYRIGHT file. * Explicitly noted copyright information at beginning of ttylog.c. * Derived this ttylog ChangeLog from debian/changelog, which is where all changes were being noted previously. 2008-06-26 Robert James Clay 0.1.c * Added support for 4800 baud (Closes: Debian bug#203356) * Remove unneeded printf for flushed option. (Closes: Debian bug#267872) * Change ICRNL to IGNCR for connection setup. (Closes: Debian bug#280629) * Remove del1013() and other unused code (Closes: Debian bug#271098) * Fix nostrip build issue. (Closes: bug#438226) 2002-11-04 Tibor Koleszar 0.1.b-3 * Using optional output flush - Closes: Debian bug#164778 2002-01-12 Tibor Koleszar 0.1.b-2 * Its not a debian native package - Closes: Debian bug#127498 2002-01-12 Tibor Koleszar 0.1.b-1 * Removed binary files from upstream - Closes: Debian bug#127496 * Added COPYRIGHT and LICENCE files - Closes: Debian bug#127499 2001-01-02 Tibor Koleszar 0.1.a-3 * Changed typo at Tibor Koleszar -h (verison -> version) 2000-01-06 Tibor Koleszar 0.1.a-2 * fflushed output 1999-06-04 Tibor Koleszar 0.1.a-1 * Initial release. ttylog-0.31/INSTALL000066400000000000000000000025211322700404200140020ustar00rootroot00000000000000How to build ttylog =================== CMake is now the standard build system for ttylog; see the 'Legacy Makefile' section for information about an alternate way of doing the build and install. (1) Create a build directory for CMake to work in. mkdir cd (2) Run CMake to configure and create the build system files. cmake [OPTIONS] -- OR -- ccmake -- OR -- cmake-gui (3) On systems where Makefiles are used, then run: make sudo make install For more details on the options available as well as other information, see the CMake documentation. Legacy Makefile =============== Note that if you do not have CMake available to you or do not wish to use it, see below for a copy of an example Makefile for ttylog; you can extract it to the ttylog source directory and use that instead. # Legacy Makefile for ttylog CFLAGS+= -Wall -g -O2 INS = /usr/bin/install GZIP = /bin/gzip all: ttylog ttylog: ttylog.o $(CC) $(LDFLAGS) -o ttylog ttylog.o ttylog.o: ttylog.c $(CC) $(CPPFLAGS) $(CFLAGS) -c ttylog.c clean: rm -f *.o ttylog core *~ install: ttylog $(INS) -o root -g root -m 0755 ttylog $(DESTDIR)/usr/sbin $(INS) -o root -g root -m 0444 ttylog.8 $(DESTDIR)/usr/share/man/man8 ttylog-0.31/LICENSE000066400000000000000000000366361322700404200137740ustar00rootroot00000000000000GNU GENERAL PUBLIC LICENSE Version 2, June 1991 Copyright (C) 1989, 1991 Free Software Foundation, Inc. 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed. Preamble The licenses for most software are designed to take away your freedom to share and change it. By contrast, the GNU General Public License is intended to guarantee your freedom to share and change free software--to make sure the software is free for all its users. This General Public License applies to most of the Free Software Foundation's software and to any other program whose authors commit to using it. (Some other Free Software Foundation software is covered by the GNU Library General Public License instead.) You can apply it to your programs, too. When we speak of free software, we are referring to freedom, not price. Our General Public Licenses are designed to make sure that you have the freedom to distribute copies of free software (and charge for this service if you wish), that you receive source code or can get it if you want it, that you can change the software or use pieces of it in new free programs; and that you know you can do these things. To protect your rights, we need to make restrictions that forbid anyone to deny you these rights or to ask you to surrender the rights. These restrictions translate to certain responsibilities for you if you distribute copies of the software, or if you modify it. For example, if you distribute copies of such a program, whether gratis or for a fee, you must give the recipients all the rights that you have. You must make sure that they, too, receive or can get the source code. And you must show them these terms so they know their rights. We protect your rights with two steps: (1) copyright the software, and (2) offer you this license which gives you legal permission to copy, distribute and/or modify the software. Also, for each author's protection and ours, we want to make certain that everyone understands that there is no warranty for this free software. If the software is modified by someone else and passed on, we want its recipients to know that what they have is not the original, so that any problems introduced by others will not reflect on the original authors' reputations. Finally, any free program is threatened constantly by software patents. We wish to avoid the danger that redistributors of a free program will individually obtain patent licenses, in effect making the program proprietary. To prevent this, we have made it clear that any patent must be licensed for everyone's free use or not licensed at all. The precise terms and conditions for copying, distribution and modification follow. TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION 0. This License applies to any program or other work which contains a notice placed by the copyright holder saying it may be distributed under the terms of this General Public License. The "Program", below, refers to any such program or work, and a "work based on the Program" means either the Program or any derivative work under copyright law: that is to say, a work containing the Program or a portion of it, either verbatim or with modifications and/or translated into another language. (Hereinafter, translation is included without limitation in the term "modification".) Each licensee is addressed as "you". Activities other than copying, distribution and modification are not covered by this License; they are outside its scope. The act of running the Program is not restricted, and the output from the Program is covered only if its contents constitute a work based on the Program (independent of having been made by running the Program). Whether that is true depends on what the Program does. 1. You may copy and distribute verbatim copies of the Program's source code as you receive it, in any medium, provided that you conspicuously and appropriately publish on each copy an appropriate copyright notice and disclaimer of warranty; keep intact all the notices that refer to this License and to the absence of any warranty; and give any other recipients of the Program a copy of this License along with the Program. You may charge a fee for the physical act of transferring a copy, and you may at your option offer warranty protection in exchange for a fee. 2. You may modify your copy or copies of the Program or any portion of it, thus forming a work based on the Program, and copy and distribute such modifications or work under the terms of Section 1 above, provided that you also meet all of these conditions: * a) You must cause the modified files to carry prominent notices stating that you changed the files and the date of any change. * b) You must cause any work that you distribute or publish, that in whole or in part contains or is derived from the Program or any part thereof, to be licensed as a whole at no charge to all third parties under the terms of this License. * c) If the modified program normally reads commands interactively when run, you must cause it, when started running for such interactive use in the most ordinary way, to print or display an announcement including an appropriate copyright notice and a notice that there is no warranty (or else, saying that you provide a warranty) and that users may redistribute the program under these conditions, and telling the user how to view a copy of this License. (Exception: if the Program itself is interactive but does not normally print such an announcement, your work based on the Program is not required to print an announcement.) These requirements apply to the modified work as a whole. If identifiable sections of that work are not derived from the Program, and can be reasonably considered independent and separate works in themselves, then this License, and its terms, do not apply to those sections when you distribute them as separate works. But when you distribute the same sections as part of a whole which is a work based on the Program, the distribution of the whole must be on the terms of this License, whose permissions for other licensees extend to the entire whole, and thus to each and every part regardless of who wrote it. Thus, it is not the intent of this section to claim rights or contest your rights to work written entirely by you; rather, the intent is to exercise the right to control the distribution of derivative or collective works based on the Program. In addition, mere aggregation of another work not based on the Program with the Program (or with a work based on the Program) on a volume of a storage or distribution medium does not bring the other work under the scope of this License. 3. You may copy and distribute the Program (or a work based on it, under Section 2) in object code or executable form under the terms of Sections 1 and 2 above provided that you also do one of the following: * a) Accompany it with the complete corresponding machine-readable source code, which must be distributed under the terms of Sections 1 and 2 above on a medium customarily used for software interchange; or, * b) Accompany it with a written offer, valid for at least three years, to give any third party, for a charge no more than your cost of physically performing source distribution, a complete machine-readable copy of the corresponding source code, to be distributed under the terms of Sections 1 and 2 above on a medium customarily used for software interchange; or, * c) Accompany it with the information you received as to the offer to distribute corresponding source code. (This alternative is allowed only for noncommercial distribution and only if you received the program in object code or executable form with such an offer, in accord with Subsection b above.) The source code for a work means the preferred form of the work for making modifications to it. For an executable work, complete source code means all the source code for all modules it contains, plus any associated interface definition files, plus the scripts used to control compilation and installation of the executable. However, as a special exception, the source code distributed need not include anything that is normally distributed (in either source or binary form) with the major components (compiler, kernel, and so on) of the operating system on which the executable runs, unless that component itself accompanies the executable. If distribution of executable or object code is made by offering access to copy from a designated place, then offering equivalent access to copy the source code from the same place counts as distribution of the source code, even though third parties are not compelled to copy the source along with the object code. 4. You may not copy, modify, sublicense, or distribute the Program except as expressly provided under this License. Any attempt otherwise to copy, modify, sublicense or distribute the Program is void, and will automatically terminate your rights under this License. However, parties who have received copies, or rights, from you under this License will not have their licenses terminated so long as such parties remain in full compliance. 5. You are not required to accept this License, since you have not signed it. However, nothing else grants you permission to modify or distribute the Program or its derivative works. These actions are prohibited by law if you do not accept this License. Therefore, by modifying or distributing the Program (or any work based on the Program), you indicate your acceptance of this License to do so, and all its terms and conditions for copying, distributing or modifying the Program or works based on it. 6. Each time you redistribute the Program (or any work based on the Program), the recipient automatically receives a license from the original licensor to copy, distribute or modify the Program subject to these terms and conditions. You may not impose any further restrictions on the recipients' exercise of the rights granted herein. You are not responsible for enforcing compliance by third parties to this License. 7. If, as a consequence of a court judgment or allegation of patent infringement or for any other reason (not limited to patent issues), conditions are imposed on you (whether by court order, agreement or otherwise) that contradict the conditions of this License, they do not excuse you from the conditions of this License. If you cannot distribute so as to satisfy simultaneously your obligations under this License and any other pertinent obligations, then as a consequence you may not distribute the Program at all. For example, if a patent license would not permit royalty-free redistribution of the Program by all those who receive copies directly or indirectly through you, then the only way you could satisfy both it and this License would be to refrain entirely from distribution of the Program. If any portion of this section is held invalid or unenforceable under any particular circumstance, the balance of the section is intended to apply and the section as a whole is intended to apply in other circumstances. It is not the purpose of this section to induce you to infringe any patents or other property right claims or to contest validity of any such claims; this section has the sole purpose of protecting the integrity of the free software distribution system, which is implemented by public license practices. Many people have made generous contributions to the wide range of software distributed through that system in reliance on consistent application of that system; it is up to the author/donor to decide if he or she is willing to distribute software through any other system and a licensee cannot impose that choice. This section is intended to make thoroughly clear what is believed to be a consequence of the rest of this License. 8. If the distribution and/or use of the Program is restricted in certain countries either by patents or by copyrighted interfaces, the original copyright holder who places the Program under this License may add an explicit geographical distribution limitation excluding those countries, so that distribution is permitted only in or among countries not thus excluded. In such case, this License incorporates the limitation as if written in the body of this License. 9. The Free Software Foundation may publish revised and/or new versions of the General Public License from time to time. Such new versions will be similar in spirit to the present version, but may differ in detail to address new problems or concerns. Each version is given a distinguishing version number. If the Program specifies a version number of this License which applies to it and "any later version", you have the option of following the terms and conditions either of that version or of any later version published by the Free Software Foundation. If the Program does not specify a version number of this License, you may choose any version ever published by the Free Software Foundation. 10. If you wish to incorporate parts of the Program into other free programs whose distribution conditions are different, write to the author to ask for permission. For software which is copyrighted by the Free Software Foundation, write to the Free Software Foundation; we sometimes make exceptions for this. Our decision will be guided by the two goals of preserving the free status of all derivatives of our free software and of promoting the sharing and reuse of software generally. NO WARRANTY 11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION. 12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. END OF TERMS AND CONDITIONS ttylog-0.31/README.md000066400000000000000000000023071322700404200142320ustar00rootroot00000000000000ttylog ====== This program writes everything comes from a serial device from /dev/tty* onto stdout. You can specify the device and the baud rate of the device. It was originally written and packaged for Debian by Tibor Koleszar and is now maintained by Robert James Clay. Information about how to build ttylog can be found in the INSTALL file. Copyright is GPL-2+, details of which can be found in the COPYRIGHT and LICENSE files. Usage: ------ ttylog [-b|--baud] [-d|--device] [-f|--flush] [-s|--stamp] [-t|--timeout] > /path/to/logfile If you are not using the timeout option, you can stop it running by pressing a ctrl-c when it's going to the screen or doing 'kill -HUP nnnn' if running it in the background. Web sites ----------- ttylog website: http://ttylog.sourceforge.net/ ttylog project: https://sourceforge.net/projects/ttylog/ Code ---- ttylog Git repository: http://sourceforge.net/p/ttylog/code/ ttylog at GitHub: https://github.com/rocasa/ttylog Support ------- https://sourceforge.net/p/ttylog/support-requests/ https://sourceforge.net/p/ttylog/bugs/ https://sourceforge.net/p/ttylog/patches/ https://sourceforge.net/p/ttylog/feature-requests/ https://github.com/rocasa/ttylog/issues ttylog-0.31/TODO000066400000000000000000000150541322700404200134460ustar00rootroot00000000000000ttylog TODO: --------------------------------------------------------------------------- README.md - Use markdown to make the lists into bulleted lists (Web Sites and Support and Code). - Put spaces around the "|" char in the Usage line? --------------------------------------------------------------------------- - 22 Dec 2017 $ make Scanning dependencies of target ttylog [ 50%] Building C object CMakeFiles/ttylog.dir/ttylog.c.o /home/jame/Projects/ttylog/ttylog.git/ttylog.c: In function ‘main’: /home/jame/Projects/ttylog/ttylog.git/ttylog.c:190:31: warning: ‘baud’ may be used uninitialized in this function [-Wmaybe-uninitialized] cfsetispeed (&newtio, BAUD_B[baud]); ~~~~~~^~~~~~ [100%] Linking C executable ttylog [100%] Built target ttylog - Yet is that actually true? Thought it's being initialized to "-1" at line 53? -------------------------------------------------------------------------------- 6/26/2016 ----------- - Error reported in at GH regarding errors related to OS X not having the librt library needed for the '-t' option. https://sourceforge.net/p/ttylog/bugs/9/ https://github.com/rocasa/ttylog/issues/6 - looks like a work around would be to bypass the '-t' option altogether when compiling OS X. Perhaps enclosing the code for the '-t' option with an 'if' clause that just prints that the '-t' is not available when the librt library is not available. That way the option is still there but the compile won't fail on OS X. (It's already set not to link on "APPLE".) --------------------------------------------------------------------------- - https://sourceforge.net/p/ttylog/feature-requests/8/ Add functionality to enable the creation of RPM source and binary archives, at least starting out with the default (minimal) ones that can be created using the CMake functionalty that is available. Reference also: https://cmake.org/Wiki/CMakeUserUseRPMTools https://cmake.org/Wiki/CMake:CPackPackageGenerators - My only need to add it to the 'list' of generators? --------------------------------------------------------------------------- https://sourceforge.net/p/ttylog/bugs/7/ - 14 Feb 2013: in the code parsing the '-d|--device' parameter, an if/else stanza is used to set the modem_device variable if a device is actually listed, also taking care of the issue for if the device name is too long; but the else clause is there but empty. Is the else clause actually needed? The first step after the parameter passing and just a few lines later is checking the length of the modem_device name and failing out if "no device is set". Move that length check to the else clause? Also; is that "!strcmp" enough? There are actually three not two possible results to that comparision. -> these also may be resolved by changing to use getopts or getopts long or one of the other commandline parsing libraries - June 2015: or would it be better to change to using getopts_long()? - there had been at feature request type thing that included an added option, though the patch they included (on an older version) did not appear to include the code for it. - this is still present with v0.29 - this should error out because of the bad option '--b', when there is only supposed to be '-b' or '--baud' option, but doesn't. This may b resolved but changing to use the standard getopt or the arg_parse (Argp) library. /usr/sbin/ttylog --b 2400 -d /dev/ttyS0 - Other argument for updating it to use getopts; the following should fail because there is no '-c' option: root@rjcpc:/home/jame/Projects/ttylog/work# ./ttylog -c 4 -b 2400 -d /dev/ttyUSB0 http://www.gnu.org/software/libc/manual/html_node/Parsing-Program-Arguments.html http://www.gnu.org/software/libc/manual/html_node/Getopt-Long-Option-Example.html --------------------------------------------------------------------------- - Looks like I need to work on the hardening issues at the source, as the current pkg build under stretch now results in no hardening related lintian results but it needs more investigation because this shows on Debian Stretch with gcc v5.3.1-21: $ hardening-check --verbose ttylog ttylog: Position Independent Executable: yes Stack protected: no, not found! Fortify Source functions: yes (some protected functions found) unprotected: fgets unprotected: strncpy protected: printf protected: fdelt Read-only relocations: yes Immediate binding: yes ---------------------------------------------------------------------------- - https://sourceforge.net/p/ttylog/bugs/8/ - June 2016: compile time warnings, found building v0.28 for debian /usr/bin/cmake -E cmake_progress_report /tmp/buildd/ttylog-0.28/obj-x86_64-linux-gnu/CMakeFiles 1 [100%] Building C object CMakeFiles/ttylog.dir/ttylog.c.o /usr/bin/cc -g -O2 -fstack-protector-strong -Wformat -Werror=format-security -D_FORTIFY_SOURCE=2 -D_FORTIFY_SOURCE=2 -I/tmp/buildd/ttylog-0.26 -o CMakeFiles /ttylog.dir/ttylog.c.o -c /tmp/buildd/ttylog-0.28/ttylog.c /tmp/buildd/ttylog-0.28/ttylog.c: In function 'main': ---------------------------------------------------------------------------- For v0.3n ? - Now have splint installed and a simple 'splint ttylog' results in multiple issues found with the header files. - use 'splint' to check the code? - had an issue with 'splint', so installed adlint; issues with that as well. Need to learn more about either. ---------------------------------------------------------------------------- - Change the ttylog.8 file to be an asciidoc source file, then add the necessary steps to CMakeLists.txt to get at least the man page from that & perhaps also an optional html version doc file as well? ------------------------------------------------------------------------------- - Build in Debian Stretch in June 2016 results in the following from Lintian: P: ttylog source: debian-watch-may-check-gpg-signature https://lintian.debian.org/tags/debian-watch-may-check-gpg-signature.html - Investigate using my GPG key to sign upstream tarball; I already use it to sign the tags in the code repository. - this is specific to adding such to a release at github but also notes how to create the sig to begin with https://wiki.debian.org/Creating%20signed%20GitHub%20releases - This is the example given at step 6, which should "give a file called mysoftware-0.4.tar.gz.asc". Although I think I'd need to include something specifiying the key to use. gpg --armor --detach-sign mysoftware-0.4.tar.gz ------------------------------------------------------------------------------ ttylog-0.31/config.h.in000066400000000000000000000005621322700404200147770ustar00rootroot00000000000000/** * Auto-generated configuration header. * See config.h.in if you need to modify the config.h content. */ #ifndef _TTYLOG_CONFIG_H_ #define _TTYLOG_CONFIG_H_ #define TTYLOG_VERSION_MAJOR @TTYLOG_VERSION_MAJOR@ #define TTYLOG_VERSION_MINOR @TTYLOG_VERSION_MINOR@ #define TTYLOG_VERSION_PATCH @TTYLOG_VERSION_PATCH@ #define TTYLOG_VERSION "@TTYLOG_VERSION@" #endif ttylog-0.31/ttylog.8000066400000000000000000000024531322700404200143700ustar00rootroot00000000000000.TH TTYLOG 8 "2016-06-02" "" "" .SH NAME ttylog \- serial device logger .SH SYNOPSIS .B ttylog [-b|--baud] [-d|--device] [-f|--flush] [-t|--timeout] > /path/to/logfile .PP If you are not using the timeout option, you can stop it running by pressing a ctrl-c when it's going to the screen or doing "kill -HUP nnnn" (where nnnn is the process ID for ttylog) if running in the background. .SH DESCRIPTION This program writes everything that comes from a serial device like /dev/ttyS1 onto stdout. You can specify the device and the baud rate of the device. .SH OPTIONS ttylog follows the GNU command line syntax, with long options starting with two dashes('-'). A summary of the options is included below: .TP .B -h, --help Displays a little help .TP .B -v, --version Version number of ttylog plus Copyright information .TP .B -b, --baud Baud rate of the device. Available baud rates: 300, 1200, 2400, 4800, 9600, 19200, 38400, 57600 and 115200 .TP .B -d --device The serial device. For example /dev/ttyS1 .TP .B -f --flush Output buffers are flushed after every write. .TP .B -t --timeout How long to run ttylog, in seconds. .SH AUTHOR This manual page was originally written by Tibor Koleszar , for the Debian GNU/Linux system. Modifications and updates written by Robert James Clay . ttylog-0.31/ttylog.c000066400000000000000000000166541322700404200144530ustar00rootroot00000000000000/* ttylog - serial port logger Copyright (C) 1999-2002 Tibor Koleszar Copyright (C) 2008-2018 Robert James Clay Copyright (C) 2017-2018 Guy Shapiro Copyright (C) 2016 Donald Gordon Copyright (C) 2016 Alexander (MrMontag) Fust Copyright (C) 2016 Logan Rosen This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. */ #include #include #include #include #include #include #include #include #include #include #include #include #include "config.h" #define BAUDN 9 char flush = 0; char *BAUD_T[] = {"300", "1200", "2400", "4800", "9600", "19200", "38400", "57600", "115200"}; int BAUD_B[] = {B300, B1200, B2400, B4800, B9600, B19200, B38400, B57600, B115200}; int main (int argc, char *argv[]) { FILE *logfile; fd_set rfds; int retval, i, j, baud = -1; int stamp = 0; timer_t timerid; struct sigevent sevp; sevp.sigev_notify = SIGEV_SIGNAL; sevp.sigev_signo = SIGINT; int fd; char line[1024], modem_device[512]; struct termios oldtio, newtio; time_t rawtime; struct tm *timeinfo; char *timestr; modem_device[0] = 0; if (argc < 2) { printf ("%s: no params. try %s -h\n", argv[0], argv[0]); exit (0); } for (i = 1; i < argc; i++) { if (!strcmp (argv[i], "-h") || !strcmp (argv[i], "--help")) { printf ("ttylog version %s\n", TTYLOG_VERSION); printf ("Usage: ttylog [-b|--baud] [-d|--device] [-f|--flush] [-s|--stamp] [-t|--timeout] > /path/to/logfile\n"); printf (" -h, --help This help\n -v, --version Version number\n -b, --baud Baud rate\n"); printf (" -d, --device Serial device (eg. /dev/ttyS1)\n -f, --flush Flush output\n"); printf (" -s, --stamp\tPrefix each line with datestamp\n"); printf (" -t, --timeout How long to run, in seconds.\n"); printf ("ttylog home page: \n\n"); exit (0); } if (!strcmp (argv[i], "-v") || !strcmp (argv[i], "--version")) { printf ("ttylog version %s\n", TTYLOG_VERSION); printf ("Copyright (C) 2018 Robert James Clay \n"); printf ("Copyright (C) 2018 Guy Shapiro \n"); printf ("Copyright (C) 2016 Donald Gordon \n"); printf ("Copyright (C) 2016 Logan Rosen \n"); printf ("Copyright (C) 2016 Alexander (MrMontag) Fust \n"); printf ("Copyright (C) 2002 Tibor Koleszar \n"); printf ("License GPLv2+: \n"); printf ("This is free software: you are free to change and redistribute it.\n"); printf ("There is NO WARRANTY, to the extent permitted by law.\n\n"); exit (0); } if (!strcmp (argv[i], "-f") || !strcmp (argv[i], "--flush")) { flush = 1; } if (!strcmp (argv[i], "-s") || !strcmp (argv[i], "--stamp")) { stamp = 1; } if (!strcmp (argv[i], "-b") || !strcmp (argv[i], "--baud")) { if (argv[i + 1] != NULL) { for (j = 0; j < BAUDN; j++) if (!strcmp (argv[i + 1], BAUD_T[j])) baud = j; } if (baud == -1) { printf ("%s: invalid baud rate %s\n", argv[0], argv[i + 1]); exit (0); } } if (!strcmp (argv[i], "-d") || !strcmp (argv[i], "--device")) { if (argv[i + 1] != NULL) { memset (modem_device, '\0', sizeof(modem_device)); strncpy (modem_device, argv[i + 1], sizeof(modem_device)-1); modem_device[(sizeof(modem_device)-1)] = '\0'; } else { } } if (!strcmp (argv[i], "-t") || !strcmp (argv[i], "--timeout")) { if (argv[i + 1] == NULL) { printf ("%s: invalid time span %s\n", argv[0], argv[i + 1]); exit(0); } if (timer_create (CLOCK_REALTIME, &sevp, &timerid) == -1) { printf ("%s: unable to create timer: %s\n", argv[0], strerror(errno)); exit (0); } struct itimerspec new_value; new_value.it_interval.tv_sec = 0; new_value.it_interval.tv_nsec = 0; int sec = atoi(argv[i + 1]); if (!sec) { printf ("%s: invalid time span %s\n", argv[0], argv[i + 1]); exit(0); } new_value.it_value.tv_sec = atoi(argv[i + 1]); new_value.it_value.tv_nsec = 0; if (timer_settime(timerid, 0, &new_value, NULL) == -1) { printf ("%s: unable to set timer time: %s\n", argv[0], strerror(errno)); exit (0); } } } if (!strlen(modem_device)) { printf ("%s: no device is set. Use %s -h for more information.\n", argv[0], argv[0]); exit (0); } logfile = fopen (modem_device, "rb"); if (logfile == NULL) { printf ("%s: invalid device %s\n", argv[0], modem_device); exit (0); } fd = fileno (logfile); tcgetattr (fd, &oldtio); /* save current serial port settings */ bzero (&newtio, sizeof (newtio)); /* clear struct for new port settings */ newtio.c_cflag = CRTSCTS | CS8 | CLOCAL | CREAD; newtio.c_iflag = IGNPAR | IGNCR; newtio.c_oflag = 0; newtio.c_lflag = ICANON; /* Only truly portable method of setting speed. */ cfsetispeed (&newtio, BAUD_B[baud]); cfsetospeed (&newtio, BAUD_B[baud]); tcflush (fd, TCIFLUSH); tcsetattr (fd, TCSANOW, &newtio); /* Clear the device */ { int flags = fcntl (fd, F_GETFL, 0); fcntl (fd, F_SETFL, flags | O_NONBLOCK); while (fgets (line, 1024, logfile) ); fcntl (fd, F_SETFL, flags); } if (flush) setbuf(stdout, NULL); while (1) { FD_ZERO (&rfds); FD_SET (fd, &rfds); retval = select (fd + 1, &rfds, NULL, NULL, NULL); if (retval > 0) { if (!fgets (line, 1024, logfile)) { if (ferror (logfile)) { break; } } if (stamp) { time(&rawtime); timeinfo = localtime(&rawtime); timestr = asctime(timeinfo); timestr[strlen(timestr) - 1] = 0; printf ("[%s] %s", timestr, line); } else { fputs (line, stdout); } if (flush) { fflush(stdout); } } else if (retval < 0) { break; } } fclose (logfile); tcsetattr (fd, TCSANOW, &oldtio); return 0; }