--- tk2-1.1.orig/debian/README.Debian +++ tk2-1.1/debian/README.Debian @@ -0,0 +1,42 @@ +tk2 for Debian +-------------- + +On Bob's website at http://parnass.org/ you can find utilities for various +scanners and receivers. If needed I can package them for you. However, please +do not send me a request unless you can actually test the package on a +live receiver. + +The README for this package is in /usr/share/tk2, but you can also open it +from the help menu. + +To be able to access the serial port on your system it is best if you add +yourself to dialout group. First, check if the serial port is owned by +group dialout: + +$ ls -al /dev/ttyS0 +crw-rw---- 1 root dialout 4, 64 2006-04-17 11:39 /dev/ttyS0 + +Next, as root add yourself to the dialout group using the 'vigr' command, +e.g. after adding user pg4i, the line looks like this: + +dialout:x:20:pg4i + +In case one doesn't have their ICOM R2 manual handy to look this fact +up, note that to communicate with one's R2, while pushing [TS], [V/M] +and [up arrow], push [POWER] for 1 second. "CLONE" appears. +(When all finished, all one probably can do is press [POWER] to turn +the R2 off.) --Dan Jacobson. + +Q: My laptop has no serial port, I shall buy an USB-Serial adapter. + +A: OK, but before leaving the store, be sure there is several volts DC +on some of the RS232 pins, or else, as mentioned in +/usr/share/doc/linux-doc-*/Documentation/usb/usb-serial.txt.gz "The +hid->com adapter ... is incapable of raising line voltage properly," +referring to e.g., "cypress 1-1.1.3:1.0: HID->COM RS232 Adapter +converter", that means you probably won't be able to establish +communications with the Serial-TTL interface you have made. +Other adapters e.g., ID 0557:2008 ATEN International Co., Ltd +UC-232A Serial Port [pl2303], worked. + + -- Joop Stakenborg , Thu, 30 Mar 2006 21:17:49 +0200 --- tk2-1.1.orig/debian/changelog +++ tk2-1.1/debian/changelog @@ -0,0 +1,78 @@ +tk2 (1.1-9.2) unstable; urgency=low + + * Non-maintainer upload. + * Replaced tk8.4|tk8.3 by tk in dependencies list. Closes: #726084. + + -- Sergei Golovan Thu, 31 Oct 2013 08:54:52 +0400 + +tk2 (1.1-9.1) unstable; urgency=low + + * Retiring - remove myself from the uploaders list. + + -- Joop Stakenborg Mon, 16 Nov 2009 18:28:47 +0000 + +tk2 (1.1-9) unstable; urgency=low + + * Menu transition. + * Several lintian fixes. + + -- Joop Stakenborg Sun, 10 Feb 2008 19:14:51 +0100 + +tk2 (1.1-8) unstable; urgency=low + + * Transfer ownership to Debian-Hams. + + -- Joop Stakenborg Sun, 1 Apr 2007 20:23:25 +0200 + +tk2 (1.1-7) unstable; urgency=low + + * Do not distribute README in /usr/share/doc/tk2, because it is + already in /usr/share/tk2. + + -- Joop Stakenborg Mon, 18 Dec 2006 09:42:15 +0100 + +tk2 (1.1-6) unstable; urgency=low + + * Improve debian/copyright. + + -- Joop Stakenborg Wed, 29 Nov 2006 19:06:02 +0100 + +tk2 (1.1-5) unstable; urgency=low + + * Another comment added to README.Debian concerning the use of usb-to- + serial converters. Thanks to Dan Jacobson. Closes: #363544. + * Update standards version. + * Make sure some of the tcl files in /usr/share/tk2 don't have the exec + bit set. + + -- Joop Stakenborg Fri, 5 May 2006 20:38:07 +0200 + +tk2 (1.1-4) unstable; urgency=low + + * Fix spelling errors in README.Debian. Closes: #364183. + * Mention best device permission method in README.Debian. Closes: #363546. + * Slim the package by making /usr/share/tk2/COPYING a symlink to + /usr/share/common-licenses/GPL. + * Thanks to Dan Jacobson for the reports. + + -- Joop Stakenborg Sat, 22 Apr 2006 10:55:46 +0200 + +tk2 (1.1-3) unstable; urgency=low + + * Let the manual page point to the correct location of the README. + + -- Joop Stakenborg Sat, 15 Apr 2006 19:43:40 +0200 + +tk2 (1.1-2) unstable; urgency=low + + * Install README and COPYING file in /usr/share/tk2. Closes: #362732. + * Add a note by Dan Jacobson to README.Debian, thanks! + + -- Joop Stakenborg Sat, 15 Apr 2006 12:37:15 +0200 + +tk2 (1.1-1) unstable; urgency=low + + * Initial release Closes: #359007. + + -- Joop Stakenborg Thu, 30 Mar 2006 21:17:49 +0200 + --- tk2-1.1.orig/debian/compat +++ tk2-1.1/debian/compat @@ -0,0 +1 @@ +4 --- tk2-1.1.orig/debian/control +++ tk2-1.1/debian/control @@ -0,0 +1,26 @@ +Source: tk2 +Section: hamradio +Priority: optional +Maintainer: Debian Hamradio Maintainers +Uploaders: Jaime Robles , Patrick Ouellette , Hamish Moffatt +Build-Depends: debhelper (>= 4.0.0) +Standards-Version: 3.7.3 + +Package: tk2 +Architecture: all +Depends: tk +Description: Tk GUI for the ICOM IC-R2 receiver + The current, experimental version of tk2 works with IC-R2 models which + employ 10 kHz or 9 kHz spacing in the AM Broadcast Band (e.g., USA, + Japanese, European, and other models). It permits expanded .005 - + 1599.995 MHz frequency coverage (except cellular bands) for memory + channels and can: + . + Read a memory image from an IC-R2 receiver or a disk file. + Display data from a memory image and let a user change various settings. + Add descriptive labels to memory channels and banks. + Sort memory channels by frequency or label. + Swap pairs of memory banks. + Import memory channel data from a csv or ICF file. + Export memory channel data to a csv file. + Write the results back to the radio. --- tk2-1.1.orig/debian/copyright +++ tk2-1.1/debian/copyright @@ -0,0 +1,59 @@ +This package was debianized by Joop Stakenborg on +Thu, 30 Mar 2006 21:17:49 +0200. + +It was downloaded from http://parnass.org/tk2. +Author e-mail: bob@parnass.com + +From tk2.tcl: +################################################################### +# This file is part of tk2, a utility program for the +# ICOM IC-R2 receiver. +# +# Copyright (C) 2001 - 2004, Bob Parnass +# AJ9S +# +# tk5 is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published +# by the Free Software Foundation; either version 2 of the License, +# or (at your option) any later version. +# +# tk5 is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with tk2; if not, write to the Free Software +# Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, +# MA 02110-1301, USA. +################################################################### + +Tk2 is released under the terms of the GNU General Public +License, see /usr/share/common-licenses/GPL on your Debian system. + +misclib.tcl is from the book 'Effective Tcl/Tk Programming', it is available +in the public domain and can be downloaded freely from the internet, +the header reads: + +# Effective Tcl/Tk Programming +# Mark Harrison, DSC Communications Corp. +# Michael McLennan, Bell Labs Innovations for Lucent Technologies +# Addison-Wesley Professional Computing Series +# ====================================================================== +# Copyright (c) 1996-1997 Lucent Technologies Inc. and Mark Harrison +# ====================================================================== + +From the README included with the source code which goes with this book: +---------------------------------------------------------------------- + Part of the Addison-Wesley Professional Computing Series + Copyright (c) 1996-1997 Lucent Technologies Inc. and Mark Harrison +---------------------------------------------------------------------- + +This distribution contains examples from the "Effective Tcl/Tk +Programming" book. You can study these examples as you read +through the book, and you can steal the code for your own +applications! + + +The Debian packaging is (C) 2006, Joop Stakenborg and +is licensed under the GPL, see `/usr/share/common-licenses/GPL'. --- tk2-1.1.orig/debian/dirs +++ tk2-1.1/debian/dirs @@ -0,0 +1,2 @@ +usr/bin +usr/share/tk2 --- tk2-1.1.orig/debian/rules +++ tk2-1.1/debian/rules @@ -0,0 +1,64 @@ +#!/usr/bin/make -f +# -*- makefile -*- +# Sample debian/rules that uses debhelper. +# This file was originally written by Joey Hess and Craig Small. +# As a special exception, when this file is copied by dh-make into a +# dh-make output file, you may use that output file without restriction. +# This special exception was added by Craig Small in version 0.37 of dh-make. + +# Uncomment this to turn on verbose mode. +#export DH_VERBOSE=1 + +configure: configure-stamp +configure-stamp: + dh_testdir + # Add here commands to configure the package. + + touch configure-stamp + + +build: build-stamp + +build-stamp: configure-stamp + dh_testdir + touch build-stamp + +clean: + dh_testdir + dh_testroot + rm -f build-stamp configure-stamp + dh_clean + +install: build + dh_testdir + dh_testroot + dh_clean -k + dh_installdirs + +# Build architecture-independent files here. +binary-indep: build install + dh_testdir + dh_testroot + dh_installchangelogs + dh_installdocs -X README + dh_installexamples sample.csv + dh_install + chmod -x debian/tk2/usr/share/tk2/api2.tcl \ + debian/tk2/usr/share/tk2/gui2.tcl debian/tk2/usr/share/tk2/misclib.tcl \ + debian/tk2/usr/share/tk2/mylib.tcl + dh_installmenu + dh_installman tk2.1 + dh_link + dh_strip + dh_compress + dh_fixperms + dh_installdeb + dh_gencontrol + dh_md5sums + dh_builddeb + +# Build architecture-dependent files here. +binary-arch: build install + +binary: binary-indep binary-arch +.PHONY: build clean binary-indep binary-arch binary install configure --- tk2-1.1.orig/debian/tk2.install +++ tk2-1.1/debian/tk2.install @@ -0,0 +1,7 @@ +api2.tcl usr/share/tk2 +gui2.tcl usr/share/tk2 +misclib.tcl usr/share/tk2 +mylib.tcl usr/share/tk2 +tk2 usr/bin +tk2.tcl usr/share/tk2 +README usr/share/tk2 --- tk2-1.1.orig/debian/tk2.links +++ tk2-1.1/debian/tk2.links @@ -0,0 +1,2 @@ +usr/share/common-licenses/GPL usr/share/tk2/COPYING + --- tk2-1.1.orig/debian/tk2.menu +++ tk2-1.1/debian/tk2.menu @@ -0,0 +1,2 @@ +?package(tk2):needs="X11" section="Applications/Amateur Radio"\ + title="Tk2" command="/usr/bin/tk2" --- tk2-1.1.orig/tk2 +++ tk2-1.1/tk2 @@ -0,0 +1,4 @@ +#!/bin/sh +export tk2=/usr/share/tk2 +exec /usr/share/tk2/tk2.tcl +exit 0 --- tk2-1.1.orig/tk2.1 +++ tk2-1.1/tk2.1 @@ -0,0 +1,7 @@ +.TH TK2 1 +.SH NAME +tk2 \- Tk GUI for the ICOM IC-R2 receiver +.SH SYNOPSIS +.B tk2 +.SH SEE ALSO +/usr/share/tk2/README and /usr/share/doc/tk2