pekwm-0.4.4/ 0000775 0001750 0001750 00000000000 15164641624 006416 5 pekwm-0.4.4/config.guess 0000755 0001750 0001750 00000143067 15126246531 010663 #! /bin/sh
# Attempt to guess a canonical system name.
# Copyright 1992-2024 Free Software Foundation, Inc.
# shellcheck disable=SC2006,SC2268 # see below for rationale
timestamp='2024-07-27'
# This file is free software; you can redistribute it and/or modify it
# under the terms of the GNU General Public License as published by
# the Free Software Foundation, either version 3 of the License, or
# (at your option) any later version.
#
# This program is distributed in the hope that it will be useful, but
# WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
# General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, see .
#
# As a special exception to the GNU General Public License, if you
# distribute this file as part of a program that contains a
# configuration script generated by Autoconf, you may include it under
# the same distribution terms that you use for the rest of that
# program. This Exception is an additional permission under section 7
# of the GNU General Public License, version 3 ("GPLv3").
#
# Originally written by Per Bothner; maintained since 2000 by Ben Elliston.
#
# You can get the latest version of this script from:
# https://git.savannah.gnu.org/cgit/config.git/plain/config.guess
#
# Please send patches to .
# The "shellcheck disable" line above the timestamp inhibits complaints
# about features and limitations of the classic Bourne shell that were
# superseded or lifted in POSIX. However, this script identifies a wide
# variety of pre-POSIX systems that do not have POSIX shells at all, and
# even some reasonably current systems (Solaris 10 as case-in-point) still
# have a pre-POSIX /bin/sh.
me=`echo "$0" | sed -e 's,.*/,,'`
usage="\
Usage: $0 [OPTION]
Output the configuration name of the system '$me' is run on.
Options:
-h, --help print this help, then exit
-t, --time-stamp print date of last modification, then exit
-v, --version print version number, then exit
Report bugs and patches to ."
version="\
GNU config.guess ($timestamp)
Originally written by Per Bothner.
Copyright 1992-2024 Free Software Foundation, Inc.
This is free software; see the source for copying conditions. There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE."
help="
Try '$me --help' for more information."
# Parse command line
while test $# -gt 0 ; do
case $1 in
--time-stamp | --time* | -t )
echo "$timestamp" ; exit ;;
--version | -v )
echo "$version" ; exit ;;
--help | --h* | -h )
echo "$usage"; exit ;;
-- ) # Stop option processing
shift; break ;;
- ) # Use stdin as input.
break ;;
-* )
echo "$me: invalid option $1$help" >&2
exit 1 ;;
* )
break ;;
esac
done
if test $# != 0; then
echo "$me: too many arguments$help" >&2
exit 1
fi
# Just in case it came from the environment.
GUESS=
# CC_FOR_BUILD -- compiler used by this script. Note that the use of a
# compiler to aid in system detection is discouraged as it requires
# temporary files to be created and, as you can see below, it is a
# headache to deal with in a portable fashion.
# Historically, 'CC_FOR_BUILD' used to be named 'HOST_CC'. We still
# use 'HOST_CC' if defined, but it is deprecated.
# Portable tmp directory creation inspired by the Autoconf team.
tmp=
# shellcheck disable=SC2172
trap 'test -z "$tmp" || rm -fr "$tmp"' 0 1 2 13 15
set_cc_for_build() {
# prevent multiple calls if $tmp is already set
test "$tmp" && return 0
: "${TMPDIR=/tmp}"
# shellcheck disable=SC2039,SC3028
{ tmp=`(umask 077 && mktemp -d "$TMPDIR/cgXXXXXX") 2>/dev/null` && test -n "$tmp" && test -d "$tmp" ; } ||
{ test -n "$RANDOM" && tmp=$TMPDIR/cg$$-$RANDOM && (umask 077 && mkdir "$tmp" 2>/dev/null) ; } ||
{ tmp=$TMPDIR/cg-$$ && (umask 077 && mkdir "$tmp" 2>/dev/null) && echo "Warning: creating insecure temp directory" >&2 ; } ||
{ echo "$me: cannot create a temporary directory in $TMPDIR" >&2 ; exit 1 ; }
dummy=$tmp/dummy
case ${CC_FOR_BUILD-},${HOST_CC-},${CC-} in
,,) echo "int x;" > "$dummy.c"
for driver in cc gcc c17 c99 c89 ; do
if ($driver -c -o "$dummy.o" "$dummy.c") >/dev/null 2>&1 ; then
CC_FOR_BUILD=$driver
break
fi
done
if test x"$CC_FOR_BUILD" = x ; then
CC_FOR_BUILD=no_compiler_found
fi
;;
,,*) CC_FOR_BUILD=$CC ;;
,*,*) CC_FOR_BUILD=$HOST_CC ;;
esac
}
# This is needed to find uname on a Pyramid OSx when run in the BSD universe.
# (ghazi@noc.rutgers.edu 1994-08-24)
if test -f /.attbin/uname ; then
PATH=$PATH:/.attbin ; export PATH
fi
UNAME_MACHINE=`(uname -m) 2>/dev/null` || UNAME_MACHINE=unknown
UNAME_RELEASE=`(uname -r) 2>/dev/null` || UNAME_RELEASE=unknown
UNAME_SYSTEM=`(uname -s) 2>/dev/null` || UNAME_SYSTEM=unknown
UNAME_VERSION=`(uname -v) 2>/dev/null` || UNAME_VERSION=unknown
case $UNAME_SYSTEM in
Linux|GNU|GNU/*)
LIBC=unknown
set_cc_for_build
cat <<-EOF > "$dummy.c"
#if defined(__ANDROID__)
LIBC=android
#else
#include
#if defined(__UCLIBC__)
LIBC=uclibc
#elif defined(__dietlibc__)
LIBC=dietlibc
#elif defined(__GLIBC__)
LIBC=gnu
#elif defined(__LLVM_LIBC__)
LIBC=llvm
#else
#include
/* First heuristic to detect musl libc. */
#ifdef __DEFINED_va_list
LIBC=musl
#endif
#endif
#endif
EOF
cc_set_libc=`$CC_FOR_BUILD -E "$dummy.c" 2>/dev/null | grep '^LIBC' | sed 's, ,,g'`
eval "$cc_set_libc"
# Second heuristic to detect musl libc.
if [ "$LIBC" = unknown ] &&
command -v ldd >/dev/null &&
ldd --version 2>&1 | grep -q ^musl; then
LIBC=musl
fi
# If the system lacks a compiler, then just pick glibc.
# We could probably try harder.
if [ "$LIBC" = unknown ]; then
LIBC=gnu
fi
;;
esac
# Note: order is significant - the case branches are not exclusive.
case $UNAME_MACHINE:$UNAME_SYSTEM:$UNAME_RELEASE:$UNAME_VERSION in
*:NetBSD:*:*)
# NetBSD (nbsd) targets should (where applicable) match one or
# more of the tuples: *-*-netbsdelf*, *-*-netbsdaout*,
# *-*-netbsdecoff* and *-*-netbsd*. For targets that recently
# switched to ELF, *-*-netbsd* would select the old
# object file format. This provides both forward
# compatibility and a consistent mechanism for selecting the
# object file format.
#
# Note: NetBSD doesn't particularly care about the vendor
# portion of the name. We always set it to "unknown".
UNAME_MACHINE_ARCH=`(uname -p 2>/dev/null || \
/sbin/sysctl -n hw.machine_arch 2>/dev/null || \
/usr/sbin/sysctl -n hw.machine_arch 2>/dev/null || \
echo unknown)`
case $UNAME_MACHINE_ARCH in
aarch64eb) machine=aarch64_be-unknown ;;
armeb) machine=armeb-unknown ;;
arm*) machine=arm-unknown ;;
sh3el) machine=shl-unknown ;;
sh3eb) machine=sh-unknown ;;
sh5el) machine=sh5le-unknown ;;
earmv*)
arch=`echo "$UNAME_MACHINE_ARCH" | sed -e 's,^e\(armv[0-9]\).*$,\1,'`
endian=`echo "$UNAME_MACHINE_ARCH" | sed -ne 's,^.*\(eb\)$,\1,p'`
machine=${arch}${endian}-unknown
;;
*) machine=$UNAME_MACHINE_ARCH-unknown ;;
esac
# The Operating System including object format, if it has switched
# to ELF recently (or will in the future) and ABI.
case $UNAME_MACHINE_ARCH in
earm*)
os=netbsdelf
;;
arm*|i386|m68k|ns32k|sh3*|sparc|vax)
set_cc_for_build
if echo __ELF__ | $CC_FOR_BUILD -E - 2>/dev/null \
| grep -q __ELF__
then
# Once all utilities can be ECOFF (netbsdecoff) or a.out (netbsdaout).
# Return netbsd for either. FIX?
os=netbsd
else
os=netbsdelf
fi
;;
*)
os=netbsd
;;
esac
# Determine ABI tags.
case $UNAME_MACHINE_ARCH in
earm*)
expr='s/^earmv[0-9]/-eabi/;s/eb$//'
abi=`echo "$UNAME_MACHINE_ARCH" | sed -e "$expr"`
;;
esac
# The OS release
# Debian GNU/NetBSD machines have a different userland, and
# thus, need a distinct triplet. However, they do not need
# kernel version information, so it can be replaced with a
# suitable tag, in the style of linux-gnu.
case $UNAME_VERSION in
Debian*)
release='-gnu'
;;
*)
release=`echo "$UNAME_RELEASE" | sed -e 's/[-_].*//' | cut -d. -f1,2`
;;
esac
# Since CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM:
# contains redundant information, the shorter form:
# CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM is used.
GUESS=$machine-${os}${release}${abi-}
;;
*:Bitrig:*:*)
UNAME_MACHINE_ARCH=`arch | sed 's/Bitrig.//'`
GUESS=$UNAME_MACHINE_ARCH-unknown-bitrig$UNAME_RELEASE
;;
*:OpenBSD:*:*)
UNAME_MACHINE_ARCH=`arch | sed 's/OpenBSD.//'`
GUESS=$UNAME_MACHINE_ARCH-unknown-openbsd$UNAME_RELEASE
;;
*:SecBSD:*:*)
UNAME_MACHINE_ARCH=`arch | sed 's/SecBSD.//'`
GUESS=$UNAME_MACHINE_ARCH-unknown-secbsd$UNAME_RELEASE
;;
*:LibertyBSD:*:*)
UNAME_MACHINE_ARCH=`arch | sed 's/^.*BSD\.//'`
GUESS=$UNAME_MACHINE_ARCH-unknown-libertybsd$UNAME_RELEASE
;;
*:MidnightBSD:*:*)
GUESS=$UNAME_MACHINE-unknown-midnightbsd$UNAME_RELEASE
;;
*:ekkoBSD:*:*)
GUESS=$UNAME_MACHINE-unknown-ekkobsd$UNAME_RELEASE
;;
*:SolidBSD:*:*)
GUESS=$UNAME_MACHINE-unknown-solidbsd$UNAME_RELEASE
;;
*:OS108:*:*)
GUESS=$UNAME_MACHINE-unknown-os108_$UNAME_RELEASE
;;
macppc:MirBSD:*:*)
GUESS=powerpc-unknown-mirbsd$UNAME_RELEASE
;;
*:MirBSD:*:*)
GUESS=$UNAME_MACHINE-unknown-mirbsd$UNAME_RELEASE
;;
*:Sortix:*:*)
GUESS=$UNAME_MACHINE-unknown-sortix
;;
*:Twizzler:*:*)
GUESS=$UNAME_MACHINE-unknown-twizzler
;;
*:Redox:*:*)
GUESS=$UNAME_MACHINE-unknown-redox
;;
mips:OSF1:*.*)
GUESS=mips-dec-osf1
;;
alpha:OSF1:*:*)
# Reset EXIT trap before exiting to avoid spurious non-zero exit code.
trap '' 0
case $UNAME_RELEASE in
*4.0)
UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $3}'`
;;
*5.*)
UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $4}'`
;;
esac
# According to Compaq, /usr/sbin/psrinfo has been available on
# OSF/1 and Tru64 systems produced since 1995. I hope that
# covers most systems running today. This code pipes the CPU
# types through head -n 1, so we only detect the type of CPU 0.
ALPHA_CPU_TYPE=`/usr/sbin/psrinfo -v | sed -n -e 's/^ The alpha \(.*\) processor.*$/\1/p' | head -n 1`
case $ALPHA_CPU_TYPE in
"EV4 (21064)")
UNAME_MACHINE=alpha ;;
"EV4.5 (21064)")
UNAME_MACHINE=alpha ;;
"LCA4 (21066/21068)")
UNAME_MACHINE=alpha ;;
"EV5 (21164)")
UNAME_MACHINE=alphaev5 ;;
"EV5.6 (21164A)")
UNAME_MACHINE=alphaev56 ;;
"EV5.6 (21164PC)")
UNAME_MACHINE=alphapca56 ;;
"EV5.7 (21164PC)")
UNAME_MACHINE=alphapca57 ;;
"EV6 (21264)")
UNAME_MACHINE=alphaev6 ;;
"EV6.7 (21264A)")
UNAME_MACHINE=alphaev67 ;;
"EV6.8CB (21264C)")
UNAME_MACHINE=alphaev68 ;;
"EV6.8AL (21264B)")
UNAME_MACHINE=alphaev68 ;;
"EV6.8CX (21264D)")
UNAME_MACHINE=alphaev68 ;;
"EV6.9A (21264/EV69A)")
UNAME_MACHINE=alphaev69 ;;
"EV7 (21364)")
UNAME_MACHINE=alphaev7 ;;
"EV7.9 (21364A)")
UNAME_MACHINE=alphaev79 ;;
esac
# A Pn.n version is a patched version.
# A Vn.n version is a released version.
# A Tn.n version is a released field test version.
# A Xn.n version is an unreleased experimental baselevel.
# 1.2 uses "1.2" for uname -r.
OSF_REL=`echo "$UNAME_RELEASE" | sed -e 's/^[PVTX]//' | tr ABCDEFGHIJKLMNOPQRSTUVWXYZ abcdefghijklmnopqrstuvwxyz`
GUESS=$UNAME_MACHINE-dec-osf$OSF_REL
;;
Amiga*:UNIX_System_V:4.0:*)
GUESS=m68k-unknown-sysv4
;;
*:[Aa]miga[Oo][Ss]:*:*)
GUESS=$UNAME_MACHINE-unknown-amigaos
;;
*:[Mm]orph[Oo][Ss]:*:*)
GUESS=$UNAME_MACHINE-unknown-morphos
;;
*:OS/390:*:*)
GUESS=i370-ibm-openedition
;;
*:z/VM:*:*)
GUESS=s390-ibm-zvmoe
;;
*:OS400:*:*)
GUESS=powerpc-ibm-os400
;;
arm:RISC*:1.[012]*:*|arm:riscix:1.[012]*:*)
GUESS=arm-acorn-riscix$UNAME_RELEASE
;;
arm*:riscos:*:*|arm*:RISCOS:*:*)
GUESS=arm-unknown-riscos
;;
SR2?01:HI-UX/MPP:*:* | SR8000:HI-UX/MPP:*:*)
GUESS=hppa1.1-hitachi-hiuxmpp
;;
Pyramid*:OSx*:*:* | MIS*:OSx*:*:* | MIS*:SMP_DC-OSx*:*:*)
# akee@wpdis03.wpafb.af.mil (Earle F. Ake) contributed MIS and NILE.
case `(/bin/universe) 2>/dev/null` in
att) GUESS=pyramid-pyramid-sysv3 ;;
*) GUESS=pyramid-pyramid-bsd ;;
esac
;;
NILE*:*:*:dcosx)
GUESS=pyramid-pyramid-svr4
;;
DRS?6000:unix:4.0:6*)
GUESS=sparc-icl-nx6
;;
DRS?6000:UNIX_SV:4.2*:7* | DRS?6000:isis:4.2*:7*)
case `/usr/bin/uname -p` in
sparc) GUESS=sparc-icl-nx7 ;;
esac
;;
s390x:SunOS:*:*)
SUN_REL=`echo "$UNAME_RELEASE" | sed -e 's/[^.]*//'`
GUESS=$UNAME_MACHINE-ibm-solaris2$SUN_REL
;;
sun4H:SunOS:5.*:*)
SUN_REL=`echo "$UNAME_RELEASE" | sed -e 's/[^.]*//'`
GUESS=sparc-hal-solaris2$SUN_REL
;;
sun4*:SunOS:5.*:* | tadpole*:SunOS:5.*:*)
SUN_REL=`echo "$UNAME_RELEASE" | sed -e 's/[^.]*//'`
GUESS=sparc-sun-solaris2$SUN_REL
;;
i86pc:AuroraUX:5.*:* | i86xen:AuroraUX:5.*:*)
GUESS=i386-pc-auroraux$UNAME_RELEASE
;;
i86pc:SunOS:5.*:* | i86xen:SunOS:5.*:*)
set_cc_for_build
SUN_ARCH=i386
# If there is a compiler, see if it is configured for 64-bit objects.
# Note that the Sun cc does not turn __LP64__ into 1 like gcc does.
# This test works for both compilers.
if test "$CC_FOR_BUILD" != no_compiler_found; then
if (echo '#ifdef __amd64'; echo IS_64BIT_ARCH; echo '#endif') | \
(CCOPTS="" $CC_FOR_BUILD -m64 -E - 2>/dev/null) | \
grep IS_64BIT_ARCH >/dev/null
then
SUN_ARCH=x86_64
fi
fi
SUN_REL=`echo "$UNAME_RELEASE" | sed -e 's/[^.]*//'`
GUESS=$SUN_ARCH-pc-solaris2$SUN_REL
;;
sun4*:SunOS:6*:*)
# According to config.sub, this is the proper way to canonicalize
# SunOS6. Hard to guess exactly what SunOS6 will be like, but
# it's likely to be more like Solaris than SunOS4.
SUN_REL=`echo "$UNAME_RELEASE" | sed -e 's/[^.]*//'`
GUESS=sparc-sun-solaris3$SUN_REL
;;
sun4*:SunOS:*:*)
case `/usr/bin/arch -k` in
Series*|S4*)
UNAME_RELEASE=`uname -v`
;;
esac
# Japanese Language versions have a version number like '4.1.3-JL'.
SUN_REL=`echo "$UNAME_RELEASE" | sed -e 's/-/_/'`
GUESS=sparc-sun-sunos$SUN_REL
;;
sun3*:SunOS:*:*)
GUESS=m68k-sun-sunos$UNAME_RELEASE
;;
sun*:*:4.2BSD:*)
UNAME_RELEASE=`(sed 1q /etc/motd | awk '{print substr($5,1,3)}') 2>/dev/null`
test "x$UNAME_RELEASE" = x && UNAME_RELEASE=3
case `/bin/arch` in
sun3)
GUESS=m68k-sun-sunos$UNAME_RELEASE
;;
sun4)
GUESS=sparc-sun-sunos$UNAME_RELEASE
;;
esac
;;
aushp:SunOS:*:*)
GUESS=sparc-auspex-sunos$UNAME_RELEASE
;;
# The situation for MiNT is a little confusing. The machine name
# can be virtually everything (everything which is not
# "atarist" or "atariste" at least should have a processor
# > m68000). The system name ranges from "MiNT" over "FreeMiNT"
# to the lowercase version "mint" (or "freemint"). Finally
# the system name "TOS" denotes a system which is actually not
# MiNT. But MiNT is downward compatible to TOS, so this should
# be no problem.
atarist[e]:*MiNT:*:* | atarist[e]:*mint:*:* | atarist[e]:*TOS:*:*)
GUESS=m68k-atari-mint$UNAME_RELEASE
;;
atari*:*MiNT:*:* | atari*:*mint:*:* | atarist[e]:*TOS:*:*)
GUESS=m68k-atari-mint$UNAME_RELEASE
;;
*falcon*:*MiNT:*:* | *falcon*:*mint:*:* | *falcon*:*TOS:*:*)
GUESS=m68k-atari-mint$UNAME_RELEASE
;;
milan*:*MiNT:*:* | milan*:*mint:*:* | *milan*:*TOS:*:*)
GUESS=m68k-milan-mint$UNAME_RELEASE
;;
hades*:*MiNT:*:* | hades*:*mint:*:* | *hades*:*TOS:*:*)
GUESS=m68k-hades-mint$UNAME_RELEASE
;;
*:*MiNT:*:* | *:*mint:*:* | *:*TOS:*:*)
GUESS=m68k-unknown-mint$UNAME_RELEASE
;;
m68k:machten:*:*)
GUESS=m68k-apple-machten$UNAME_RELEASE
;;
powerpc:machten:*:*)
GUESS=powerpc-apple-machten$UNAME_RELEASE
;;
RISC*:Mach:*:*)
GUESS=mips-dec-mach_bsd4.3
;;
RISC*:ULTRIX:*:*)
GUESS=mips-dec-ultrix$UNAME_RELEASE
;;
VAX*:ULTRIX*:*:*)
GUESS=vax-dec-ultrix$UNAME_RELEASE
;;
2020:CLIX:*:* | 2430:CLIX:*:*)
GUESS=clipper-intergraph-clix$UNAME_RELEASE
;;
mips:*:*:UMIPS | mips:*:*:RISCos)
set_cc_for_build
sed 's/^ //' << EOF > "$dummy.c"
#ifdef __cplusplus
#include /* for printf() prototype */
int main (int argc, char *argv[]) {
#else
int main (argc, argv) int argc; char *argv[]; {
#endif
#if defined (host_mips) && defined (MIPSEB)
#if defined (SYSTYPE_SYSV)
printf ("mips-mips-riscos%ssysv\\n", argv[1]); exit (0);
#endif
#if defined (SYSTYPE_SVR4)
printf ("mips-mips-riscos%ssvr4\\n", argv[1]); exit (0);
#endif
#if defined (SYSTYPE_BSD43) || defined(SYSTYPE_BSD)
printf ("mips-mips-riscos%sbsd\\n", argv[1]); exit (0);
#endif
#endif
exit (-1);
}
EOF
$CC_FOR_BUILD -o "$dummy" "$dummy.c" &&
dummyarg=`echo "$UNAME_RELEASE" | sed -n 's/\([0-9]*\).*/\1/p'` &&
SYSTEM_NAME=`"$dummy" "$dummyarg"` &&
{ echo "$SYSTEM_NAME"; exit; }
GUESS=mips-mips-riscos$UNAME_RELEASE
;;
Motorola:PowerMAX_OS:*:*)
GUESS=powerpc-motorola-powermax
;;
Motorola:*:4.3:PL8-*)
GUESS=powerpc-harris-powermax
;;
Night_Hawk:*:*:PowerMAX_OS | Synergy:PowerMAX_OS:*:*)
GUESS=powerpc-harris-powermax
;;
Night_Hawk:Power_UNIX:*:*)
GUESS=powerpc-harris-powerunix
;;
m88k:CX/UX:7*:*)
GUESS=m88k-harris-cxux7
;;
m88k:*:4*:R4*)
GUESS=m88k-motorola-sysv4
;;
m88k:*:3*:R3*)
GUESS=m88k-motorola-sysv3
;;
AViiON:dgux:*:*)
# DG/UX returns AViiON for all architectures
UNAME_PROCESSOR=`/usr/bin/uname -p`
if test "$UNAME_PROCESSOR" = mc88100 || test "$UNAME_PROCESSOR" = mc88110
then
if test "$TARGET_BINARY_INTERFACE"x = m88kdguxelfx || \
test "$TARGET_BINARY_INTERFACE"x = x
then
GUESS=m88k-dg-dgux$UNAME_RELEASE
else
GUESS=m88k-dg-dguxbcs$UNAME_RELEASE
fi
else
GUESS=i586-dg-dgux$UNAME_RELEASE
fi
;;
M88*:DolphinOS:*:*) # DolphinOS (SVR3)
GUESS=m88k-dolphin-sysv3
;;
M88*:*:R3*:*)
# Delta 88k system running SVR3
GUESS=m88k-motorola-sysv3
;;
XD88*:*:*:*) # Tektronix XD88 system running UTekV (SVR3)
GUESS=m88k-tektronix-sysv3
;;
Tek43[0-9][0-9]:UTek:*:*) # Tektronix 4300 system running UTek (BSD)
GUESS=m68k-tektronix-bsd
;;
*:IRIX*:*:*)
IRIX_REL=`echo "$UNAME_RELEASE" | sed -e 's/-/_/g'`
GUESS=mips-sgi-irix$IRIX_REL
;;
????????:AIX?:[12].1:2) # AIX 2.2.1 or AIX 2.1.1 is RT/PC AIX.
GUESS=romp-ibm-aix # uname -m gives an 8 hex-code CPU id
;; # Note that: echo "'`uname -s`'" gives 'AIX '
i*86:AIX:*:*)
GUESS=i386-ibm-aix
;;
ia64:AIX:*:*)
if test -x /usr/bin/oslevel ; then
IBM_REV=`/usr/bin/oslevel`
else
IBM_REV=$UNAME_VERSION.$UNAME_RELEASE
fi
GUESS=$UNAME_MACHINE-ibm-aix$IBM_REV
;;
*:AIX:2:3)
if grep bos325 /usr/include/stdio.h >/dev/null 2>&1; then
set_cc_for_build
sed 's/^ //' << EOF > "$dummy.c"
#include
int
main ()
{
if (!__power_pc())
exit(1);
puts("powerpc-ibm-aix3.2.5");
exit(0);
}
EOF
if $CC_FOR_BUILD -o "$dummy" "$dummy.c" && SYSTEM_NAME=`"$dummy"`
then
GUESS=$SYSTEM_NAME
else
GUESS=rs6000-ibm-aix3.2.5
fi
elif grep bos324 /usr/include/stdio.h >/dev/null 2>&1; then
GUESS=rs6000-ibm-aix3.2.4
else
GUESS=rs6000-ibm-aix3.2
fi
;;
*:AIX:*:[4567])
IBM_CPU_ID=`/usr/sbin/lsdev -C -c processor -S available | sed 1q | awk '{ print $1 }'`
if /usr/sbin/lsattr -El "$IBM_CPU_ID" | grep ' POWER' >/dev/null 2>&1; then
IBM_ARCH=rs6000
else
IBM_ARCH=powerpc
fi
if test -x /usr/bin/lslpp ; then
IBM_REV=`/usr/bin/lslpp -Lqc bos.rte.libc | \
awk -F: '{ print $3 }' | sed s/[0-9]*$/0/`
else
IBM_REV=$UNAME_VERSION.$UNAME_RELEASE
fi
GUESS=$IBM_ARCH-ibm-aix$IBM_REV
;;
*:AIX:*:*)
GUESS=rs6000-ibm-aix
;;
ibmrt:4.4BSD:*|romp-ibm:4.4BSD:*)
GUESS=romp-ibm-bsd4.4
;;
ibmrt:*BSD:*|romp-ibm:BSD:*) # covers RT/PC BSD and
GUESS=romp-ibm-bsd$UNAME_RELEASE # 4.3 with uname added to
;; # report: romp-ibm BSD 4.3
*:BOSX:*:*)
GUESS=rs6000-bull-bosx
;;
DPX/2?00:B.O.S.:*:*)
GUESS=m68k-bull-sysv3
;;
9000/[34]??:4.3bsd:1.*:*)
GUESS=m68k-hp-bsd
;;
hp300:4.4BSD:*:* | 9000/[34]??:4.3bsd:2.*:*)
GUESS=m68k-hp-bsd4.4
;;
9000/[34678]??:HP-UX:*:*)
HPUX_REV=`echo "$UNAME_RELEASE" | sed -e 's/[^.]*.[0B]*//'`
case $UNAME_MACHINE in
9000/31?) HP_ARCH=m68000 ;;
9000/[34]??) HP_ARCH=m68k ;;
9000/[678][0-9][0-9])
if test -x /usr/bin/getconf; then
sc_cpu_version=`/usr/bin/getconf SC_CPU_VERSION 2>/dev/null`
sc_kernel_bits=`/usr/bin/getconf SC_KERNEL_BITS 2>/dev/null`
case $sc_cpu_version in
523) HP_ARCH=hppa1.0 ;; # CPU_PA_RISC1_0
528) HP_ARCH=hppa1.1 ;; # CPU_PA_RISC1_1
532) # CPU_PA_RISC2_0
case $sc_kernel_bits in
32) HP_ARCH=hppa2.0n ;;
64) HP_ARCH=hppa2.0w ;;
'') HP_ARCH=hppa2.0 ;; # HP-UX 10.20
esac ;;
esac
fi
if test "$HP_ARCH" = ""; then
set_cc_for_build
sed 's/^ //' << EOF > "$dummy.c"
#define _HPUX_SOURCE
#include
#include
int
main ()
{
#if defined(_SC_KERNEL_BITS)
long bits = sysconf(_SC_KERNEL_BITS);
#endif
long cpu = sysconf (_SC_CPU_VERSION);
switch (cpu)
{
case CPU_PA_RISC1_0: puts ("hppa1.0"); break;
case CPU_PA_RISC1_1: puts ("hppa1.1"); break;
case CPU_PA_RISC2_0:
#if defined(_SC_KERNEL_BITS)
switch (bits)
{
case 64: puts ("hppa2.0w"); break;
case 32: puts ("hppa2.0n"); break;
default: puts ("hppa2.0"); break;
} break;
#else /* !defined(_SC_KERNEL_BITS) */
puts ("hppa2.0"); break;
#endif
default: puts ("hppa1.0"); break;
}
exit (0);
}
EOF
(CCOPTS="" $CC_FOR_BUILD -o "$dummy" "$dummy.c" 2>/dev/null) && HP_ARCH=`"$dummy"`
test -z "$HP_ARCH" && HP_ARCH=hppa
fi ;;
esac
if test "$HP_ARCH" = hppa2.0w
then
set_cc_for_build
# hppa2.0w-hp-hpux* has a 64-bit kernel and a compiler generating
# 32-bit code. hppa64-hp-hpux* has the same kernel and a compiler
# generating 64-bit code. GNU and HP use different nomenclature:
#
# $ CC_FOR_BUILD=cc ./config.guess
# => hppa2.0w-hp-hpux11.23
# $ CC_FOR_BUILD="cc +DA2.0w" ./config.guess
# => hppa64-hp-hpux11.23
if echo __LP64__ | (CCOPTS="" $CC_FOR_BUILD -E - 2>/dev/null) |
grep -q __LP64__
then
HP_ARCH=hppa2.0w
else
HP_ARCH=hppa64
fi
fi
GUESS=$HP_ARCH-hp-hpux$HPUX_REV
;;
ia64:HP-UX:*:*)
HPUX_REV=`echo "$UNAME_RELEASE" | sed -e 's/[^.]*.[0B]*//'`
GUESS=ia64-hp-hpux$HPUX_REV
;;
3050*:HI-UX:*:*)
set_cc_for_build
sed 's/^ //' << EOF > "$dummy.c"
#include
int
main ()
{
long cpu = sysconf (_SC_CPU_VERSION);
/* The order matters, because CPU_IS_HP_MC68K erroneously returns
true for CPU_PA_RISC1_0. CPU_IS_PA_RISC returns correct
results, however. */
if (CPU_IS_PA_RISC (cpu))
{
switch (cpu)
{
case CPU_PA_RISC1_0: puts ("hppa1.0-hitachi-hiuxwe2"); break;
case CPU_PA_RISC1_1: puts ("hppa1.1-hitachi-hiuxwe2"); break;
case CPU_PA_RISC2_0: puts ("hppa2.0-hitachi-hiuxwe2"); break;
default: puts ("hppa-hitachi-hiuxwe2"); break;
}
}
else if (CPU_IS_HP_MC68K (cpu))
puts ("m68k-hitachi-hiuxwe2");
else puts ("unknown-hitachi-hiuxwe2");
exit (0);
}
EOF
$CC_FOR_BUILD -o "$dummy" "$dummy.c" && SYSTEM_NAME=`"$dummy"` &&
{ echo "$SYSTEM_NAME"; exit; }
GUESS=unknown-hitachi-hiuxwe2
;;
9000/7??:4.3bsd:*:* | 9000/8?[79]:4.3bsd:*:*)
GUESS=hppa1.1-hp-bsd
;;
9000/8??:4.3bsd:*:*)
GUESS=hppa1.0-hp-bsd
;;
*9??*:MPE/iX:*:* | *3000*:MPE/iX:*:*)
GUESS=hppa1.0-hp-mpeix
;;
hp7??:OSF1:*:* | hp8?[79]:OSF1:*:*)
GUESS=hppa1.1-hp-osf
;;
hp8??:OSF1:*:*)
GUESS=hppa1.0-hp-osf
;;
i*86:OSF1:*:*)
if test -x /usr/sbin/sysversion ; then
GUESS=$UNAME_MACHINE-unknown-osf1mk
else
GUESS=$UNAME_MACHINE-unknown-osf1
fi
;;
parisc*:Lites*:*:*)
GUESS=hppa1.1-hp-lites
;;
C1*:ConvexOS:*:* | convex:ConvexOS:C1*:*)
GUESS=c1-convex-bsd
;;
C2*:ConvexOS:*:* | convex:ConvexOS:C2*:*)
if getsysinfo -f scalar_acc
then echo c32-convex-bsd
else echo c2-convex-bsd
fi
exit ;;
C34*:ConvexOS:*:* | convex:ConvexOS:C34*:*)
GUESS=c34-convex-bsd
;;
C38*:ConvexOS:*:* | convex:ConvexOS:C38*:*)
GUESS=c38-convex-bsd
;;
C4*:ConvexOS:*:* | convex:ConvexOS:C4*:*)
GUESS=c4-convex-bsd
;;
CRAY*Y-MP:*:*:*)
CRAY_REL=`echo "$UNAME_RELEASE" | sed -e 's/\.[^.]*$/.X/'`
GUESS=ymp-cray-unicos$CRAY_REL
;;
CRAY*[A-Z]90:*:*:*)
echo "$UNAME_MACHINE"-cray-unicos"$UNAME_RELEASE" \
| sed -e 's/CRAY.*\([A-Z]90\)/\1/' \
-e y/ABCDEFGHIJKLMNOPQRSTUVWXYZ/abcdefghijklmnopqrstuvwxyz/ \
-e 's/\.[^.]*$/.X/'
exit ;;
CRAY*TS:*:*:*)
CRAY_REL=`echo "$UNAME_RELEASE" | sed -e 's/\.[^.]*$/.X/'`
GUESS=t90-cray-unicos$CRAY_REL
;;
CRAY*T3E:*:*:*)
CRAY_REL=`echo "$UNAME_RELEASE" | sed -e 's/\.[^.]*$/.X/'`
GUESS=alphaev5-cray-unicosmk$CRAY_REL
;;
CRAY*SV1:*:*:*)
CRAY_REL=`echo "$UNAME_RELEASE" | sed -e 's/\.[^.]*$/.X/'`
GUESS=sv1-cray-unicos$CRAY_REL
;;
*:UNICOS/mp:*:*)
CRAY_REL=`echo "$UNAME_RELEASE" | sed -e 's/\.[^.]*$/.X/'`
GUESS=craynv-cray-unicosmp$CRAY_REL
;;
F30[01]:UNIX_System_V:*:* | F700:UNIX_System_V:*:*)
FUJITSU_PROC=`uname -m | tr ABCDEFGHIJKLMNOPQRSTUVWXYZ abcdefghijklmnopqrstuvwxyz`
FUJITSU_SYS=`uname -p | tr ABCDEFGHIJKLMNOPQRSTUVWXYZ abcdefghijklmnopqrstuvwxyz | sed -e 's/\///'`
FUJITSU_REL=`echo "$UNAME_RELEASE" | sed -e 's/ /_/'`
GUESS=${FUJITSU_PROC}-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}
;;
5000:UNIX_System_V:4.*:*)
FUJITSU_SYS=`uname -p | tr ABCDEFGHIJKLMNOPQRSTUVWXYZ abcdefghijklmnopqrstuvwxyz | sed -e 's/\///'`
FUJITSU_REL=`echo "$UNAME_RELEASE" | tr ABCDEFGHIJKLMNOPQRSTUVWXYZ abcdefghijklmnopqrstuvwxyz | sed -e 's/ /_/'`
GUESS=sparc-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}
;;
i*86:BSD/386:*:* | i*86:BSD/OS:*:* | *:Ascend\ Embedded/OS:*:*)
GUESS=$UNAME_MACHINE-pc-bsdi$UNAME_RELEASE
;;
sparc*:BSD/OS:*:*)
GUESS=sparc-unknown-bsdi$UNAME_RELEASE
;;
*:BSD/OS:*:*)
GUESS=$UNAME_MACHINE-unknown-bsdi$UNAME_RELEASE
;;
arm:FreeBSD:*:*)
UNAME_PROCESSOR=`uname -p`
set_cc_for_build
if echo __ARM_PCS_VFP | $CC_FOR_BUILD -E - 2>/dev/null \
| grep -q __ARM_PCS_VFP
then
FREEBSD_REL=`echo "$UNAME_RELEASE" | sed -e 's/[-(].*//'`
GUESS=$UNAME_PROCESSOR-unknown-freebsd$FREEBSD_REL-gnueabi
else
FREEBSD_REL=`echo "$UNAME_RELEASE" | sed -e 's/[-(].*//'`
GUESS=$UNAME_PROCESSOR-unknown-freebsd$FREEBSD_REL-gnueabihf
fi
;;
*:FreeBSD:*:*)
UNAME_PROCESSOR=`uname -p`
case $UNAME_PROCESSOR in
amd64)
UNAME_PROCESSOR=x86_64 ;;
i386)
UNAME_PROCESSOR=i586 ;;
esac
FREEBSD_REL=`echo "$UNAME_RELEASE" | sed -e 's/[-(].*//'`
GUESS=$UNAME_PROCESSOR-unknown-freebsd$FREEBSD_REL
;;
i*:CYGWIN*:*)
GUESS=$UNAME_MACHINE-pc-cygwin
;;
*:MINGW64*:*)
GUESS=$UNAME_MACHINE-pc-mingw64
;;
*:MINGW*:*)
GUESS=$UNAME_MACHINE-pc-mingw32
;;
*:MSYS*:*)
GUESS=$UNAME_MACHINE-pc-msys
;;
i*:PW*:*)
GUESS=$UNAME_MACHINE-pc-pw32
;;
*:SerenityOS:*:*)
GUESS=$UNAME_MACHINE-pc-serenity
;;
*:Interix*:*)
case $UNAME_MACHINE in
x86)
GUESS=i586-pc-interix$UNAME_RELEASE
;;
authenticamd | genuineintel | EM64T)
GUESS=x86_64-unknown-interix$UNAME_RELEASE
;;
IA64)
GUESS=ia64-unknown-interix$UNAME_RELEASE
;;
esac ;;
i*:UWIN*:*)
GUESS=$UNAME_MACHINE-pc-uwin
;;
amd64:CYGWIN*:*:* | x86_64:CYGWIN*:*:*)
GUESS=x86_64-pc-cygwin
;;
prep*:SunOS:5.*:*)
SUN_REL=`echo "$UNAME_RELEASE" | sed -e 's/[^.]*//'`
GUESS=powerpcle-unknown-solaris2$SUN_REL
;;
*:GNU:*:*)
# the GNU system
GNU_ARCH=`echo "$UNAME_MACHINE" | sed -e 's,[-/].*$,,'`
GNU_REL=`echo "$UNAME_RELEASE" | sed -e 's,/.*$,,'`
GUESS=$GNU_ARCH-unknown-$LIBC$GNU_REL
;;
*:GNU/*:*:*)
# other systems with GNU libc and userland
GNU_SYS=`echo "$UNAME_SYSTEM" | sed 's,^[^/]*/,,' | tr "[:upper:]" "[:lower:]"`
GNU_REL=`echo "$UNAME_RELEASE" | sed -e 's/[-(].*//'`
GUESS=$UNAME_MACHINE-unknown-$GNU_SYS$GNU_REL-$LIBC
;;
x86_64:[Mm]anagarm:*:*|i?86:[Mm]anagarm:*:*)
GUESS="$UNAME_MACHINE-pc-managarm-mlibc"
;;
*:[Mm]anagarm:*:*)
GUESS="$UNAME_MACHINE-unknown-managarm-mlibc"
;;
*:Minix:*:*)
GUESS=$UNAME_MACHINE-unknown-minix
;;
aarch64:Linux:*:*)
set_cc_for_build
CPU=$UNAME_MACHINE
LIBCABI=$LIBC
if test "$CC_FOR_BUILD" != no_compiler_found; then
ABI=64
sed 's/^ //' << EOF > "$dummy.c"
#ifdef __ARM_EABI__
#ifdef __ARM_PCS_VFP
ABI=eabihf
#else
ABI=eabi
#endif
#endif
EOF
cc_set_abi=`$CC_FOR_BUILD -E "$dummy.c" 2>/dev/null | grep '^ABI' | sed 's, ,,g'`
eval "$cc_set_abi"
case $ABI in
eabi | eabihf) CPU=armv8l; LIBCABI=$LIBC$ABI ;;
esac
fi
GUESS=$CPU-unknown-linux-$LIBCABI
;;
aarch64_be:Linux:*:*)
UNAME_MACHINE=aarch64_be
GUESS=$UNAME_MACHINE-unknown-linux-$LIBC
;;
alpha:Linux:*:*)
case `sed -n '/^cpu model/s/^.*: \(.*\)/\1/p' /proc/cpuinfo 2>/dev/null` in
EV5) UNAME_MACHINE=alphaev5 ;;
EV56) UNAME_MACHINE=alphaev56 ;;
PCA56) UNAME_MACHINE=alphapca56 ;;
PCA57) UNAME_MACHINE=alphapca56 ;;
EV6) UNAME_MACHINE=alphaev6 ;;
EV67) UNAME_MACHINE=alphaev67 ;;
EV68*) UNAME_MACHINE=alphaev68 ;;
esac
objdump --private-headers /bin/sh | grep -q ld.so.1
if test "$?" = 0 ; then LIBC=gnulibc1 ; fi
GUESS=$UNAME_MACHINE-unknown-linux-$LIBC
;;
arc:Linux:*:* | arceb:Linux:*:* | arc32:Linux:*:* | arc64:Linux:*:*)
GUESS=$UNAME_MACHINE-unknown-linux-$LIBC
;;
arm*:Linux:*:*)
set_cc_for_build
if echo __ARM_EABI__ | $CC_FOR_BUILD -E - 2>/dev/null \
| grep -q __ARM_EABI__
then
GUESS=$UNAME_MACHINE-unknown-linux-$LIBC
else
if echo __ARM_PCS_VFP | $CC_FOR_BUILD -E - 2>/dev/null \
| grep -q __ARM_PCS_VFP
then
GUESS=$UNAME_MACHINE-unknown-linux-${LIBC}eabi
else
GUESS=$UNAME_MACHINE-unknown-linux-${LIBC}eabihf
fi
fi
;;
avr32*:Linux:*:*)
GUESS=$UNAME_MACHINE-unknown-linux-$LIBC
;;
cris:Linux:*:*)
GUESS=$UNAME_MACHINE-axis-linux-$LIBC
;;
crisv32:Linux:*:*)
GUESS=$UNAME_MACHINE-axis-linux-$LIBC
;;
e2k:Linux:*:*)
GUESS=$UNAME_MACHINE-unknown-linux-$LIBC
;;
frv:Linux:*:*)
GUESS=$UNAME_MACHINE-unknown-linux-$LIBC
;;
hexagon:Linux:*:*)
GUESS=$UNAME_MACHINE-unknown-linux-$LIBC
;;
i*86:Linux:*:*)
GUESS=$UNAME_MACHINE-pc-linux-$LIBC
;;
ia64:Linux:*:*)
GUESS=$UNAME_MACHINE-unknown-linux-$LIBC
;;
k1om:Linux:*:*)
GUESS=$UNAME_MACHINE-unknown-linux-$LIBC
;;
kvx:Linux:*:*)
GUESS=$UNAME_MACHINE-unknown-linux-$LIBC
;;
kvx:cos:*:*)
GUESS=$UNAME_MACHINE-unknown-cos
;;
kvx:mbr:*:*)
GUESS=$UNAME_MACHINE-unknown-mbr
;;
loongarch32:Linux:*:* | loongarch64:Linux:*:*)
GUESS=$UNAME_MACHINE-unknown-linux-$LIBC
;;
m32r*:Linux:*:*)
GUESS=$UNAME_MACHINE-unknown-linux-$LIBC
;;
m68*:Linux:*:*)
GUESS=$UNAME_MACHINE-unknown-linux-$LIBC
;;
mips:Linux:*:* | mips64:Linux:*:*)
set_cc_for_build
IS_GLIBC=0
test x"${LIBC}" = xgnu && IS_GLIBC=1
sed 's/^ //' << EOF > "$dummy.c"
#undef CPU
#undef mips
#undef mipsel
#undef mips64
#undef mips64el
#if ${IS_GLIBC} && defined(_ABI64)
LIBCABI=gnuabi64
#else
#if ${IS_GLIBC} && defined(_ABIN32)
LIBCABI=gnuabin32
#else
LIBCABI=${LIBC}
#endif
#endif
#if ${IS_GLIBC} && defined(__mips64) && defined(__mips_isa_rev) && __mips_isa_rev>=6
CPU=mipsisa64r6
#else
#if ${IS_GLIBC} && !defined(__mips64) && defined(__mips_isa_rev) && __mips_isa_rev>=6
CPU=mipsisa32r6
#else
#if defined(__mips64)
CPU=mips64
#else
CPU=mips
#endif
#endif
#endif
#if defined(__MIPSEL__) || defined(__MIPSEL) || defined(_MIPSEL) || defined(MIPSEL)
MIPS_ENDIAN=el
#else
#if defined(__MIPSEB__) || defined(__MIPSEB) || defined(_MIPSEB) || defined(MIPSEB)
MIPS_ENDIAN=
#else
MIPS_ENDIAN=
#endif
#endif
EOF
cc_set_vars=`$CC_FOR_BUILD -E "$dummy.c" 2>/dev/null | grep '^CPU\|^MIPS_ENDIAN\|^LIBCABI'`
eval "$cc_set_vars"
test "x$CPU" != x && { echo "$CPU${MIPS_ENDIAN}-unknown-linux-$LIBCABI"; exit; }
;;
mips64el:Linux:*:*)
GUESS=$UNAME_MACHINE-unknown-linux-$LIBC
;;
openrisc*:Linux:*:*)
GUESS=or1k-unknown-linux-$LIBC
;;
or32:Linux:*:* | or1k*:Linux:*:*)
GUESS=$UNAME_MACHINE-unknown-linux-$LIBC
;;
padre:Linux:*:*)
GUESS=sparc-unknown-linux-$LIBC
;;
parisc64:Linux:*:* | hppa64:Linux:*:*)
GUESS=hppa64-unknown-linux-$LIBC
;;
parisc:Linux:*:* | hppa:Linux:*:*)
# Look for CPU level
case `grep '^cpu[^a-z]*:' /proc/cpuinfo 2>/dev/null | cut -d' ' -f2` in
PA7*) GUESS=hppa1.1-unknown-linux-$LIBC ;;
PA8*) GUESS=hppa2.0-unknown-linux-$LIBC ;;
*) GUESS=hppa-unknown-linux-$LIBC ;;
esac
;;
ppc64:Linux:*:*)
GUESS=powerpc64-unknown-linux-$LIBC
;;
ppc:Linux:*:*)
GUESS=powerpc-unknown-linux-$LIBC
;;
ppc64le:Linux:*:*)
GUESS=powerpc64le-unknown-linux-$LIBC
;;
ppcle:Linux:*:*)
GUESS=powerpcle-unknown-linux-$LIBC
;;
riscv32:Linux:*:* | riscv32be:Linux:*:* | riscv64:Linux:*:* | riscv64be:Linux:*:*)
GUESS=$UNAME_MACHINE-unknown-linux-$LIBC
;;
s390:Linux:*:* | s390x:Linux:*:*)
GUESS=$UNAME_MACHINE-ibm-linux-$LIBC
;;
sh64*:Linux:*:*)
GUESS=$UNAME_MACHINE-unknown-linux-$LIBC
;;
sh*:Linux:*:*)
GUESS=$UNAME_MACHINE-unknown-linux-$LIBC
;;
sparc:Linux:*:* | sparc64:Linux:*:*)
GUESS=$UNAME_MACHINE-unknown-linux-$LIBC
;;
tile*:Linux:*:*)
GUESS=$UNAME_MACHINE-unknown-linux-$LIBC
;;
vax:Linux:*:*)
GUESS=$UNAME_MACHINE-dec-linux-$LIBC
;;
x86_64:Linux:*:*)
set_cc_for_build
CPU=$UNAME_MACHINE
LIBCABI=$LIBC
if test "$CC_FOR_BUILD" != no_compiler_found; then
ABI=64
sed 's/^ //' << EOF > "$dummy.c"
#ifdef __i386__
ABI=x86
#else
#ifdef __ILP32__
ABI=x32
#endif
#endif
EOF
cc_set_abi=`$CC_FOR_BUILD -E "$dummy.c" 2>/dev/null | grep '^ABI' | sed 's, ,,g'`
eval "$cc_set_abi"
case $ABI in
x86) CPU=i686 ;;
x32) LIBCABI=${LIBC}x32 ;;
esac
fi
GUESS=$CPU-pc-linux-$LIBCABI
;;
xtensa*:Linux:*:*)
GUESS=$UNAME_MACHINE-unknown-linux-$LIBC
;;
i*86:DYNIX/ptx:4*:*)
# ptx 4.0 does uname -s correctly, with DYNIX/ptx in there.
# earlier versions are messed up and put the nodename in both
# sysname and nodename.
GUESS=i386-sequent-sysv4
;;
i*86:UNIX_SV:4.2MP:2.*)
# Unixware is an offshoot of SVR4, but it has its own version
# number series starting with 2...
# I am not positive that other SVR4 systems won't match this,
# I just have to hope. -- rms.
# Use sysv4.2uw... so that sysv4* matches it.
GUESS=$UNAME_MACHINE-pc-sysv4.2uw$UNAME_VERSION
;;
i*86:OS/2:*:*)
# If we were able to find 'uname', then EMX Unix compatibility
# is probably installed.
GUESS=$UNAME_MACHINE-pc-os2-emx
;;
i*86:XTS-300:*:STOP)
GUESS=$UNAME_MACHINE-unknown-stop
;;
i*86:atheos:*:*)
GUESS=$UNAME_MACHINE-unknown-atheos
;;
i*86:syllable:*:*)
GUESS=$UNAME_MACHINE-pc-syllable
;;
i*86:LynxOS:2.*:* | i*86:LynxOS:3.[01]*:* | i*86:LynxOS:4.[02]*:*)
GUESS=i386-unknown-lynxos$UNAME_RELEASE
;;
i*86:*DOS:*:*)
GUESS=$UNAME_MACHINE-pc-msdosdjgpp
;;
i*86:*:4.*:*)
UNAME_REL=`echo "$UNAME_RELEASE" | sed 's/\/MP$//'`
if grep Novell /usr/include/link.h >/dev/null 2>/dev/null; then
GUESS=$UNAME_MACHINE-univel-sysv$UNAME_REL
else
GUESS=$UNAME_MACHINE-pc-sysv$UNAME_REL
fi
;;
i*86:*:5:[678]*)
# UnixWare 7.x, OpenUNIX and OpenServer 6.
case `/bin/uname -X | grep "^Machine"` in
*486*) UNAME_MACHINE=i486 ;;
*Pentium) UNAME_MACHINE=i586 ;;
*Pent*|*Celeron) UNAME_MACHINE=i686 ;;
esac
GUESS=$UNAME_MACHINE-unknown-sysv${UNAME_RELEASE}${UNAME_SYSTEM}${UNAME_VERSION}
;;
i*86:*:3.2:*)
if test -f /usr/options/cb.name; then
UNAME_REL=`sed -n 's/.*Version //p' /dev/null >/dev/null ; then
UNAME_REL=`(/bin/uname -X|grep Release|sed -e 's/.*= //')`
(/bin/uname -X|grep i80486 >/dev/null) && UNAME_MACHINE=i486
(/bin/uname -X|grep '^Machine.*Pentium' >/dev/null) \
&& UNAME_MACHINE=i586
(/bin/uname -X|grep '^Machine.*Pent *II' >/dev/null) \
&& UNAME_MACHINE=i686
(/bin/uname -X|grep '^Machine.*Pentium Pro' >/dev/null) \
&& UNAME_MACHINE=i686
GUESS=$UNAME_MACHINE-pc-sco$UNAME_REL
else
GUESS=$UNAME_MACHINE-pc-sysv32
fi
;;
pc:*:*:*)
# Left here for compatibility:
# uname -m prints for DJGPP always 'pc', but it prints nothing about
# the processor, so we play safe by assuming i586.
# Note: whatever this is, it MUST be the same as what config.sub
# prints for the "djgpp" host, or else GDB configure will decide that
# this is a cross-build.
GUESS=i586-pc-msdosdjgpp
;;
Intel:Mach:3*:*)
GUESS=i386-pc-mach3
;;
paragon:*:*:*)
GUESS=i860-intel-osf1
;;
i860:*:4.*:*) # i860-SVR4
if grep Stardent /usr/include/sys/uadmin.h >/dev/null 2>&1 ; then
GUESS=i860-stardent-sysv$UNAME_RELEASE # Stardent Vistra i860-SVR4
else # Add other i860-SVR4 vendors below as they are discovered.
GUESS=i860-unknown-sysv$UNAME_RELEASE # Unknown i860-SVR4
fi
;;
mini*:CTIX:SYS*5:*)
# "miniframe"
GUESS=m68010-convergent-sysv
;;
mc68k:UNIX:SYSTEM5:3.51m)
GUESS=m68k-convergent-sysv
;;
M680?0:D-NIX:5.3:*)
GUESS=m68k-diab-dnix
;;
M68*:*:R3V[5678]*:*)
test -r /sysV68 && { echo 'm68k-motorola-sysv'; exit; } ;;
3[345]??:*:4.0:3.0 | 3[34]??A:*:4.0:3.0 | 3[34]??,*:*:4.0:3.0 | 3[34]??/*:*:4.0:3.0 | 4400:*:4.0:3.0 | 4850:*:4.0:3.0 | SKA40:*:4.0:3.0 | SDS2:*:4.0:3.0 | SHG2:*:4.0:3.0 | S7501*:*:4.0:3.0)
OS_REL=''
test -r /etc/.relid \
&& OS_REL=.`sed -n 's/[^ ]* [^ ]* \([0-9][0-9]\).*/\1/p' < /etc/.relid`
/bin/uname -p 2>/dev/null | grep 86 >/dev/null \
&& { echo i486-ncr-sysv4.3"$OS_REL"; exit; }
/bin/uname -p 2>/dev/null | /bin/grep entium >/dev/null \
&& { echo i586-ncr-sysv4.3"$OS_REL"; exit; } ;;
3[34]??:*:4.0:* | 3[34]??,*:*:4.0:*)
/bin/uname -p 2>/dev/null | grep 86 >/dev/null \
&& { echo i486-ncr-sysv4; exit; } ;;
NCR*:*:4.2:* | MPRAS*:*:4.2:*)
OS_REL='.3'
test -r /etc/.relid \
&& OS_REL=.`sed -n 's/[^ ]* [^ ]* \([0-9][0-9]\).*/\1/p' < /etc/.relid`
/bin/uname -p 2>/dev/null | grep 86 >/dev/null \
&& { echo i486-ncr-sysv4.3"$OS_REL"; exit; }
/bin/uname -p 2>/dev/null | /bin/grep entium >/dev/null \
&& { echo i586-ncr-sysv4.3"$OS_REL"; exit; }
/bin/uname -p 2>/dev/null | /bin/grep pteron >/dev/null \
&& { echo i586-ncr-sysv4.3"$OS_REL"; exit; } ;;
m68*:LynxOS:2.*:* | m68*:LynxOS:3.0*:*)
GUESS=m68k-unknown-lynxos$UNAME_RELEASE
;;
mc68030:UNIX_System_V:4.*:*)
GUESS=m68k-atari-sysv4
;;
TSUNAMI:LynxOS:2.*:*)
GUESS=sparc-unknown-lynxos$UNAME_RELEASE
;;
rs6000:LynxOS:2.*:*)
GUESS=rs6000-unknown-lynxos$UNAME_RELEASE
;;
PowerPC:LynxOS:2.*:* | PowerPC:LynxOS:3.[01]*:* | PowerPC:LynxOS:4.[02]*:*)
GUESS=powerpc-unknown-lynxos$UNAME_RELEASE
;;
SM[BE]S:UNIX_SV:*:*)
GUESS=mips-dde-sysv$UNAME_RELEASE
;;
RM*:ReliantUNIX-*:*:*)
GUESS=mips-sni-sysv4
;;
RM*:SINIX-*:*:*)
GUESS=mips-sni-sysv4
;;
*:SINIX-*:*:*)
if uname -p 2>/dev/null >/dev/null ; then
UNAME_MACHINE=`(uname -p) 2>/dev/null`
GUESS=$UNAME_MACHINE-sni-sysv4
else
GUESS=ns32k-sni-sysv
fi
;;
PENTIUM:*:4.0*:*) # Unisys 'ClearPath HMP IX 4000' SVR4/MP effort
# says
GUESS=i586-unisys-sysv4
;;
*:UNIX_System_V:4*:FTX*)
# From Gerald Hewes .
# How about differentiating between stratus architectures? -djm
GUESS=hppa1.1-stratus-sysv4
;;
*:*:*:FTX*)
# From seanf@swdc.stratus.com.
GUESS=i860-stratus-sysv4
;;
i*86:VOS:*:*)
# From Paul.Green@stratus.com.
GUESS=$UNAME_MACHINE-stratus-vos
;;
*:VOS:*:*)
# From Paul.Green@stratus.com.
GUESS=hppa1.1-stratus-vos
;;
mc68*:A/UX:*:*)
GUESS=m68k-apple-aux$UNAME_RELEASE
;;
news*:NEWS-OS:6*:*)
GUESS=mips-sony-newsos6
;;
R[34]000:*System_V*:*:* | R4000:UNIX_SYSV:*:* | R*000:UNIX_SV:*:*)
if test -d /usr/nec; then
GUESS=mips-nec-sysv$UNAME_RELEASE
else
GUESS=mips-unknown-sysv$UNAME_RELEASE
fi
;;
BeBox:BeOS:*:*) # BeOS running on hardware made by Be, PPC only.
GUESS=powerpc-be-beos
;;
BeMac:BeOS:*:*) # BeOS running on Mac or Mac clone, PPC only.
GUESS=powerpc-apple-beos
;;
BePC:BeOS:*:*) # BeOS running on Intel PC compatible.
GUESS=i586-pc-beos
;;
BePC:Haiku:*:*) # Haiku running on Intel PC compatible.
GUESS=i586-pc-haiku
;;
ppc:Haiku:*:*) # Haiku running on Apple PowerPC
GUESS=powerpc-apple-haiku
;;
*:Haiku:*:*) # Haiku modern gcc (not bound by BeOS compat)
GUESS=$UNAME_MACHINE-unknown-haiku
;;
SX-4:SUPER-UX:*:*)
GUESS=sx4-nec-superux$UNAME_RELEASE
;;
SX-5:SUPER-UX:*:*)
GUESS=sx5-nec-superux$UNAME_RELEASE
;;
SX-6:SUPER-UX:*:*)
GUESS=sx6-nec-superux$UNAME_RELEASE
;;
SX-7:SUPER-UX:*:*)
GUESS=sx7-nec-superux$UNAME_RELEASE
;;
SX-8:SUPER-UX:*:*)
GUESS=sx8-nec-superux$UNAME_RELEASE
;;
SX-8R:SUPER-UX:*:*)
GUESS=sx8r-nec-superux$UNAME_RELEASE
;;
SX-ACE:SUPER-UX:*:*)
GUESS=sxace-nec-superux$UNAME_RELEASE
;;
Power*:Rhapsody:*:*)
GUESS=powerpc-apple-rhapsody$UNAME_RELEASE
;;
*:Rhapsody:*:*)
GUESS=$UNAME_MACHINE-apple-rhapsody$UNAME_RELEASE
;;
arm64:Darwin:*:*)
GUESS=aarch64-apple-darwin$UNAME_RELEASE
;;
*:Darwin:*:*)
UNAME_PROCESSOR=`uname -p`
case $UNAME_PROCESSOR in
unknown) UNAME_PROCESSOR=powerpc ;;
esac
if command -v xcode-select > /dev/null 2> /dev/null && \
! xcode-select --print-path > /dev/null 2> /dev/null ; then
# Avoid executing cc if there is no toolchain installed as
# cc will be a stub that puts up a graphical alert
# prompting the user to install developer tools.
CC_FOR_BUILD=no_compiler_found
else
set_cc_for_build
fi
if test "$CC_FOR_BUILD" != no_compiler_found; then
if (echo '#ifdef __LP64__'; echo IS_64BIT_ARCH; echo '#endif') | \
(CCOPTS="" $CC_FOR_BUILD -E - 2>/dev/null) | \
grep IS_64BIT_ARCH >/dev/null
then
case $UNAME_PROCESSOR in
i386) UNAME_PROCESSOR=x86_64 ;;
powerpc) UNAME_PROCESSOR=powerpc64 ;;
esac
fi
# On 10.4-10.6 one might compile for PowerPC via gcc -arch ppc
if (echo '#ifdef __POWERPC__'; echo IS_PPC; echo '#endif') | \
(CCOPTS="" $CC_FOR_BUILD -E - 2>/dev/null) | \
grep IS_PPC >/dev/null
then
UNAME_PROCESSOR=powerpc
fi
elif test "$UNAME_PROCESSOR" = i386 ; then
# uname -m returns i386 or x86_64
UNAME_PROCESSOR=$UNAME_MACHINE
fi
GUESS=$UNAME_PROCESSOR-apple-darwin$UNAME_RELEASE
;;
*:procnto*:*:* | *:QNX:[0123456789]*:*)
UNAME_PROCESSOR=`uname -p`
if test "$UNAME_PROCESSOR" = x86; then
UNAME_PROCESSOR=i386
UNAME_MACHINE=pc
fi
GUESS=$UNAME_PROCESSOR-$UNAME_MACHINE-nto-qnx$UNAME_RELEASE
;;
*:QNX:*:4*)
GUESS=i386-pc-qnx
;;
NEO-*:NONSTOP_KERNEL:*:*)
GUESS=neo-tandem-nsk$UNAME_RELEASE
;;
NSE-*:NONSTOP_KERNEL:*:*)
GUESS=nse-tandem-nsk$UNAME_RELEASE
;;
NSR-*:NONSTOP_KERNEL:*:*)
GUESS=nsr-tandem-nsk$UNAME_RELEASE
;;
NSV-*:NONSTOP_KERNEL:*:*)
GUESS=nsv-tandem-nsk$UNAME_RELEASE
;;
NSX-*:NONSTOP_KERNEL:*:*)
GUESS=nsx-tandem-nsk$UNAME_RELEASE
;;
*:NonStop-UX:*:*)
GUESS=mips-compaq-nonstopux
;;
BS2000:POSIX*:*:*)
GUESS=bs2000-siemens-sysv
;;
DS/*:UNIX_System_V:*:*)
GUESS=$UNAME_MACHINE-$UNAME_SYSTEM-$UNAME_RELEASE
;;
*:Plan9:*:*)
# "uname -m" is not consistent, so use $cputype instead. 386
# is converted to i386 for consistency with other x86
# operating systems.
if test "${cputype-}" = 386; then
UNAME_MACHINE=i386
elif test "x${cputype-}" != x; then
UNAME_MACHINE=$cputype
fi
GUESS=$UNAME_MACHINE-unknown-plan9
;;
*:TOPS-10:*:*)
GUESS=pdp10-unknown-tops10
;;
*:TENEX:*:*)
GUESS=pdp10-unknown-tenex
;;
KS10:TOPS-20:*:* | KL10:TOPS-20:*:* | TYPE4:TOPS-20:*:*)
GUESS=pdp10-dec-tops20
;;
XKL-1:TOPS-20:*:* | TYPE5:TOPS-20:*:*)
GUESS=pdp10-xkl-tops20
;;
*:TOPS-20:*:*)
GUESS=pdp10-unknown-tops20
;;
*:ITS:*:*)
GUESS=pdp10-unknown-its
;;
SEI:*:*:SEIUX)
GUESS=mips-sei-seiux$UNAME_RELEASE
;;
*:DragonFly:*:*)
DRAGONFLY_REL=`echo "$UNAME_RELEASE" | sed -e 's/[-(].*//'`
GUESS=$UNAME_MACHINE-unknown-dragonfly$DRAGONFLY_REL
;;
*:*VMS:*:*)
UNAME_MACHINE=`(uname -p) 2>/dev/null`
case $UNAME_MACHINE in
A*) GUESS=alpha-dec-vms ;;
I*) GUESS=ia64-dec-vms ;;
V*) GUESS=vax-dec-vms ;;
esac ;;
*:XENIX:*:SysV)
GUESS=i386-pc-xenix
;;
i*86:skyos:*:*)
SKYOS_REL=`echo "$UNAME_RELEASE" | sed -e 's/ .*$//'`
GUESS=$UNAME_MACHINE-pc-skyos$SKYOS_REL
;;
i*86:rdos:*:*)
GUESS=$UNAME_MACHINE-pc-rdos
;;
i*86:Fiwix:*:*)
GUESS=$UNAME_MACHINE-pc-fiwix
;;
*:AROS:*:*)
GUESS=$UNAME_MACHINE-unknown-aros
;;
x86_64:VMkernel:*:*)
GUESS=$UNAME_MACHINE-unknown-esx
;;
amd64:Isilon\ OneFS:*:*)
GUESS=x86_64-unknown-onefs
;;
*:Unleashed:*:*)
GUESS=$UNAME_MACHINE-unknown-unleashed$UNAME_RELEASE
;;
*:Ironclad:*:*)
GUESS=$UNAME_MACHINE-unknown-ironclad
;;
esac
# Do we have a guess based on uname results?
if test "x$GUESS" != x; then
echo "$GUESS"
exit
fi
# No uname command or uname output not recognized.
set_cc_for_build
cat > "$dummy.c" <
#include
#endif
#if defined(ultrix) || defined(_ultrix) || defined(__ultrix) || defined(__ultrix__)
#if defined (vax) || defined (__vax) || defined (__vax__) || defined(mips) || defined(__mips) || defined(__mips__) || defined(MIPS) || defined(__MIPS__)
#include
#if defined(_SIZE_T_) || defined(SIGLOST)
#include
#endif
#endif
#endif
int
main ()
{
#if defined (sony)
#if defined (MIPSEB)
/* BFD wants "bsd" instead of "newsos". Perhaps BFD should be changed,
I don't know.... */
printf ("mips-sony-bsd\n"); exit (0);
#else
#include
printf ("m68k-sony-newsos%s\n",
#ifdef NEWSOS4
"4"
#else
""
#endif
); exit (0);
#endif
#endif
#if defined (NeXT)
#if !defined (__ARCHITECTURE__)
#define __ARCHITECTURE__ "m68k"
#endif
int version;
version=`(hostinfo | sed -n 's/.*NeXT Mach \([0-9]*\).*/\1/p') 2>/dev/null`;
if (version < 4)
printf ("%s-next-nextstep%d\n", __ARCHITECTURE__, version);
else
printf ("%s-next-openstep%d\n", __ARCHITECTURE__, version);
exit (0);
#endif
#if defined (MULTIMAX) || defined (n16)
#if defined (UMAXV)
printf ("ns32k-encore-sysv\n"); exit (0);
#else
#if defined (CMU)
printf ("ns32k-encore-mach\n"); exit (0);
#else
printf ("ns32k-encore-bsd\n"); exit (0);
#endif
#endif
#endif
#if defined (__386BSD__)
printf ("i386-pc-bsd\n"); exit (0);
#endif
#if defined (sequent)
#if defined (i386)
printf ("i386-sequent-dynix\n"); exit (0);
#endif
#if defined (ns32000)
printf ("ns32k-sequent-dynix\n"); exit (0);
#endif
#endif
#if defined (_SEQUENT_)
struct utsname un;
uname(&un);
if (strncmp(un.version, "V2", 2) == 0) {
printf ("i386-sequent-ptx2\n"); exit (0);
}
if (strncmp(un.version, "V1", 2) == 0) { /* XXX is V1 correct? */
printf ("i386-sequent-ptx1\n"); exit (0);
}
printf ("i386-sequent-ptx\n"); exit (0);
#endif
#if defined (vax)
#if !defined (ultrix)
#include
#if defined (BSD)
#if BSD == 43
printf ("vax-dec-bsd4.3\n"); exit (0);
#else
#if BSD == 199006
printf ("vax-dec-bsd4.3reno\n"); exit (0);
#else
printf ("vax-dec-bsd\n"); exit (0);
#endif
#endif
#else
printf ("vax-dec-bsd\n"); exit (0);
#endif
#else
#if defined(_SIZE_T_) || defined(SIGLOST)
struct utsname un;
uname (&un);
printf ("vax-dec-ultrix%s\n", un.release); exit (0);
#else
printf ("vax-dec-ultrix\n"); exit (0);
#endif
#endif
#endif
#if defined(ultrix) || defined(_ultrix) || defined(__ultrix) || defined(__ultrix__)
#if defined(mips) || defined(__mips) || defined(__mips__) || defined(MIPS) || defined(__MIPS__)
#if defined(_SIZE_T_) || defined(SIGLOST)
struct utsname *un;
uname (&un);
printf ("mips-dec-ultrix%s\n", un.release); exit (0);
#else
printf ("mips-dec-ultrix\n"); exit (0);
#endif
#endif
#endif
#if defined (alliant) && defined (i860)
printf ("i860-alliant-bsd\n"); exit (0);
#endif
exit (1);
}
EOF
$CC_FOR_BUILD -o "$dummy" "$dummy.c" 2>/dev/null && SYSTEM_NAME=`"$dummy"` &&
{ echo "$SYSTEM_NAME"; exit; }
# Apollos put the system type in the environment.
test -d /usr/apollo && { echo "$ISP-apollo-$SYSTYPE"; exit; }
echo "$0: unable to guess system type" >&2
case $UNAME_MACHINE:$UNAME_SYSTEM in
mips:Linux | mips64:Linux)
# If we got here on MIPS GNU/Linux, output extra information.
cat >&2 <&2 <&2 </dev/null || echo unknown`
uname -r = `(uname -r) 2>/dev/null || echo unknown`
uname -s = `(uname -s) 2>/dev/null || echo unknown`
uname -v = `(uname -v) 2>/dev/null || echo unknown`
/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null`
/bin/uname -X = `(/bin/uname -X) 2>/dev/null`
hostinfo = `(hostinfo) 2>/dev/null`
/bin/universe = `(/bin/universe) 2>/dev/null`
/usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null`
/bin/arch = `(/bin/arch) 2>/dev/null`
/usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null`
/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null`
UNAME_MACHINE = "$UNAME_MACHINE"
UNAME_RELEASE = "$UNAME_RELEASE"
UNAME_SYSTEM = "$UNAME_SYSTEM"
UNAME_VERSION = "$UNAME_VERSION"
EOF
fi
exit 1
# Local variables:
# eval: (add-hook 'before-save-hook 'time-stamp)
# time-stamp-start: "timestamp='"
# time-stamp-format: "%:y-%02m-%02d"
# time-stamp-end: "'"
# End:
pekwm-0.4.4/depcomp 0000755 0001750 0001750 00000056217 15126246531 007720 #! /bin/sh
# depcomp - compile a program generating dependencies as side-effects
scriptversion=2024-06-19.01; # UTC
# Copyright (C) 1999-2024 Free Software Foundation, Inc.
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2, or (at your option)
# any later version.
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
# You should have received a copy of the GNU General Public License
# along with this program. If not, see .
# As a special exception to the GNU General Public License, if you
# distribute this file as part of a program that contains a
# configuration script generated by Autoconf, you may include it under
# the same distribution terms that you use for the rest of that program.
# Originally written by Alexandre Oliva .
case $1 in
'')
echo "$0: No command. Try '$0 --help' for more information." 1>&2
exit 1;
;;
-h | --h*)
cat <<\EOF
Usage: depcomp [--help] [--version] PROGRAM [ARGS]
Run PROGRAMS ARGS to compile a file, generating dependencies
as side-effects.
Environment variables:
depmode Dependency tracking mode.
source Source file read by 'PROGRAMS ARGS'.
object Object file output by 'PROGRAMS ARGS'.
DEPDIR directory where to store dependencies.
depfile Dependency file to output.
tmpdepfile Temporary file to use when outputting dependencies.
libtool Whether libtool is used (yes/no).
Report bugs to .
GNU Automake home page: .
General help using GNU software: .
EOF
exit $?
;;
-v | --v*)
echo "depcomp (GNU Automake) $scriptversion"
exit $?
;;
esac
# Get the directory component of the given path, and save it in the
# global variables '$dir'. Note that this directory component will
# be either empty or ending with a '/' character. This is deliberate.
set_dir_from ()
{
case $1 in
*/*) dir=`echo "$1" | sed -e 's|/[^/]*$|/|'`;;
*) dir=;;
esac
}
# Get the suffix-stripped basename of the given path, and save it the
# global variable '$base'.
set_base_from ()
{
base=`echo "$1" | sed -e 's|^.*/||' -e 's/\.[^.]*$//'`
}
# If no dependency file was actually created by the compiler invocation,
# we still have to create a dummy depfile, to avoid errors with the
# Makefile "include basename.Plo" scheme.
make_dummy_depfile ()
{
echo "#dummy" > "$depfile"
}
# Factor out some common post-processing of the generated depfile.
# Requires the auxiliary global variable '$tmpdepfile' to be set.
aix_post_process_depfile ()
{
# If the compiler actually managed to produce a dependency file,
# post-process it.
if test -f "$tmpdepfile"; then
# Each line is of the form 'foo.o: dependency.h'.
# Do two passes, one to just change these to
# $object: dependency.h
# and one to simply output
# dependency.h:
# which is needed to avoid the deleted-header problem.
{ sed -e "s,^.*\.[$lower]*:,$object:," < "$tmpdepfile"
sed -e "s,^.*\.[$lower]*:[$tab ]*,," -e 's,$,:,' < "$tmpdepfile"
} > "$depfile"
rm -f "$tmpdepfile"
else
make_dummy_depfile
fi
}
# A tabulation character.
tab=' '
# A newline character.
nl='
'
# Character ranges might be problematic outside the C locale.
# These definitions help.
upper=ABCDEFGHIJKLMNOPQRSTUVWXYZ
lower=abcdefghijklmnopqrstuvwxyz
alpha=${upper}${lower}
if test -z "$depmode" || test -z "$source" || test -z "$object"; then
echo "depcomp: Variables source, object and depmode must be set" 1>&2
exit 1
fi
# Dependencies for sub/bar.o or sub/bar.obj go into sub/.deps/bar.Po.
depfile=${depfile-`echo "$object" |
sed 's|[^\\/]*$|'${DEPDIR-.deps}'/&|;s|\.\([^.]*\)$|.P\1|;s|Pobj$|Po|'`}
tmpdepfile=${tmpdepfile-`echo "$depfile" | sed 's/\.\([^.]*\)$/.T\1/'`}
rm -f "$tmpdepfile"
# Avoid interference from the environment.
gccflag= dashmflag=
# Some modes work just like other modes, but use different flags. We
# parameterize here, but still list the modes in the big case below,
# to make depend.m4 easier to write. Note that we *cannot* use a case
# here, because this file can only contain one case statement.
if test "$depmode" = hp; then
# HP compiler uses -M and no extra arg.
gccflag=-M
depmode=gcc
fi
if test "$depmode" = dashXmstdout; then
# This is just like dashmstdout with a different argument.
dashmflag=-xM
depmode=dashmstdout
fi
cygpath_u="cygpath -u -f -"
if test "$depmode" = msvcmsys; then
# This is just like msvisualcpp but w/o cygpath translation.
# Just convert the backslash-escaped backslashes to single forward
# slashes to satisfy depend.m4
cygpath_u='sed s,\\\\,/,g'
depmode=msvisualcpp
fi
if test "$depmode" = msvc7msys; then
# This is just like msvc7 but w/o cygpath translation.
# Just convert the backslash-escaped backslashes to single forward
# slashes to satisfy depend.m4
cygpath_u='sed s,\\\\,/,g'
depmode=msvc7
fi
if test "$depmode" = xlc; then
# IBM C/C++ Compilers xlc/xlC can output gcc-like dependency information.
gccflag=-qmakedep=gcc,-MF
depmode=gcc
fi
case "$depmode" in
gcc3)
## gcc 3 implements dependency tracking that does exactly what
## we want. Yay! Note: for some reason libtool 1.4 doesn't like
## it if -MD -MP comes after the -MF stuff. Hmm.
## Unfortunately, FreeBSD c89 acceptance of flags depends upon
## the command line argument order; so add the flags where they
## appear in depend2.am. Note that the slowdown incurred here
## affects only configure: in makefiles, %FASTDEP% shortcuts this.
for arg
do
case $arg in
-c) set fnord "$@" -MT "$object" -MD -MP -MF "$tmpdepfile" "$arg" ;;
*) set fnord "$@" "$arg" ;;
esac
shift # fnord
shift # $arg
done
"$@"
stat=$?
if test $stat -ne 0; then
rm -f "$tmpdepfile"
exit $stat
fi
mv "$tmpdepfile" "$depfile"
;;
gcc)
## Note that this doesn't just cater to obsolete pre-3.x GCC compilers.
## but also to in-use compilers like IBM xlc/xlC and the HP C compiler.
## (see the conditional assignment to $gccflag above).
## There are various ways to get dependency output from gcc. Here's
## why we pick this rather obscure method:
## - Don't want to use -MD because we'd like the dependencies to end
## up in a subdir. Having to rename by hand is ugly.
## (We might end up doing this anyway to support other compilers.)
## - The DEPENDENCIES_OUTPUT environment variable makes gcc act like
## -MM, not -M (despite what the docs say). Also, it might not be
## supported by the other compilers which use the 'gcc' depmode.
## - Using -M directly means running the compiler twice (even worse
## than renaming).
if test -z "$gccflag"; then
gccflag=-MD,
fi
"$@" -Wp,"$gccflag$tmpdepfile"
stat=$?
if test $stat -ne 0; then
rm -f "$tmpdepfile"
exit $stat
fi
rm -f "$depfile"
echo "$object : \\" > "$depfile"
# The second -e expression handles DOS-style file names with drive
# letters.
sed -e 's/^[^:]*: / /' \
-e 's/^['$alpha']:\/[^:]*: / /' < "$tmpdepfile" >> "$depfile"
## This next piece of magic avoids the "deleted header file" problem.
## The problem is that when a header file which appears in a .P file
## is deleted, the dependency causes make to die (because there is
## typically no way to rebuild the header). We avoid this by adding
## dummy dependencies for each header file. Too bad gcc doesn't do
## this for us directly.
## Some versions of gcc put a space before the ':'. On the theory
## that the space means something, we add a space to the output as
## well. hp depmode also adds that space, but also prefixes the VPATH
## to the object. Take care to not repeat it in the output.
## Some versions of the HPUX 10.20 sed can't process this invocation
## correctly. Breaking it into two sed invocations is a workaround.
tr ' ' "$nl" < "$tmpdepfile" \
| sed -e 's/^\\$//' -e '/^$/d' -e "s|.*$object$||" -e '/:$/d' \
| sed -e 's/$/ :/' >> "$depfile"
rm -f "$tmpdepfile"
;;
hp)
# This case exists only to let depend.m4 do its work. It works by
# looking at the text of this script. This case will never be run,
# since it is checked for above.
exit 1
;;
sgi)
if test "$libtool" = yes; then
"$@" "-Wp,-MDupdate,$tmpdepfile"
else
"$@" -MDupdate "$tmpdepfile"
fi
stat=$?
if test $stat -ne 0; then
rm -f "$tmpdepfile"
exit $stat
fi
rm -f "$depfile"
if test -f "$tmpdepfile"; then # yes, the sourcefile depend on other files
echo "$object : \\" > "$depfile"
# Clip off the initial element (the dependent). Don't try to be
# clever and replace this with sed code, as IRIX sed won't handle
# lines with more than a fixed number of characters (4096 in
# IRIX 6.2 sed, 8192 in IRIX 6.5). We also remove comment lines;
# the IRIX cc adds comments like '#:fec' to the end of the
# dependency line.
tr ' ' "$nl" < "$tmpdepfile" \
| sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' \
| tr "$nl" ' ' >> "$depfile"
echo >> "$depfile"
# The second pass generates a dummy entry for each header file.
tr ' ' "$nl" < "$tmpdepfile" \
| sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' -e 's/$/:/' \
>> "$depfile"
else
make_dummy_depfile
fi
rm -f "$tmpdepfile"
;;
xlc)
# This case exists only to let depend.m4 do its work. It works by
# looking at the text of this script. This case will never be run,
# since it is checked for above.
exit 1
;;
aix)
# The C for AIX Compiler uses -M and outputs the dependencies
# in a .u file. In older versions, this file always lives in the
# current directory. Also, the AIX compiler puts '$object:' at the
# start of each line; $object doesn't have directory information.
# Version 6 uses the directory in both cases.
set_dir_from "$object"
set_base_from "$object"
if test "$libtool" = yes; then
tmpdepfile1=$dir$base.u
tmpdepfile2=$base.u
tmpdepfile3=$dir.libs/$base.u
"$@" -Wc,-M
else
tmpdepfile1=$dir$base.u
tmpdepfile2=$dir$base.u
tmpdepfile3=$dir$base.u
"$@" -M
fi
stat=$?
if test $stat -ne 0; then
rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3"
exit $stat
fi
for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3"
do
test -f "$tmpdepfile" && break
done
aix_post_process_depfile
;;
tcc)
# tcc (Tiny C Compiler) understand '-MD -MF file' since version 0.9.26
# FIXME: That version still under development at the moment of writing.
# Make that this statement remains true also for stable, released
# versions.
# It will wrap lines (doesn't matter whether long or short) with a
# trailing '\', as in:
#
# foo.o : \
# foo.c \
# foo.h \
#
# It will put a trailing '\' even on the last line, and will use leading
# spaces rather than leading tabs (at least since its commit 0394caf7
# "Emit spaces for -MD").
"$@" -MD -MF "$tmpdepfile"
stat=$?
if test $stat -ne 0; then
rm -f "$tmpdepfile"
exit $stat
fi
rm -f "$depfile"
# Each non-empty line is of the form 'foo.o : \' or ' dep.h \'.
# We have to change lines of the first kind to '$object: \'.
sed -e "s|.*:|$object :|" < "$tmpdepfile" > "$depfile"
# And for each line of the second kind, we have to emit a 'dep.h:'
# dummy dependency, to avoid the deleted-header problem.
sed -n -e 's|^ *\(.*\) *\\$|\1:|p' < "$tmpdepfile" >> "$depfile"
rm -f "$tmpdepfile"
;;
## The order of this option in the case statement is important, since the
## shell code in configure will try each of these formats in the order
## listed in this file. A plain '-MD' option would be understood by many
## compilers, so we must ensure this comes after the gcc and icc options.
pgcc)
# Portland's C compiler understands '-MD'.
# Will always output deps to 'file.d' where file is the root name of the
# source file under compilation, even if file resides in a subdirectory.
# The object file name does not affect the name of the '.d' file.
# pgcc 10.2 will output
# foo.o: sub/foo.c sub/foo.h
# and will wrap long lines using '\' :
# foo.o: sub/foo.c ... \
# sub/foo.h ... \
# ...
set_dir_from "$object"
# Use the source, not the object, to determine the base name, since
# that's sadly what pgcc will do too.
set_base_from "$source"
tmpdepfile=$base.d
# For projects that build the same source file twice into different object
# files, the pgcc approach of using the *source* file root name can cause
# problems in parallel builds. Use a locking strategy to avoid stomping on
# the same $tmpdepfile.
lockdir=$base.d-lock
trap "
echo '$0: caught signal, cleaning up...' >&2
rmdir '$lockdir'
exit 1
" 1 2 13 15
numtries=100
i=$numtries
while test $i -gt 0; do
# mkdir is a portable test-and-set.
if mkdir "$lockdir" 2>/dev/null; then
# This process acquired the lock.
"$@" -MD
stat=$?
# Release the lock.
rmdir "$lockdir"
break
else
# If the lock is being held by a different process, wait
# until the winning process is done or we timeout.
while test -d "$lockdir" && test $i -gt 0; do
sleep 1
i=`expr $i - 1`
done
fi
i=`expr $i - 1`
done
trap - 1 2 13 15
if test $i -le 0; then
echo "$0: failed to acquire lock after $numtries attempts" >&2
echo "$0: check lockdir '$lockdir'" >&2
exit 1
fi
if test $stat -ne 0; then
rm -f "$tmpdepfile"
exit $stat
fi
rm -f "$depfile"
# Each line is of the form `foo.o: dependent.h',
# or `foo.o: dep1.h dep2.h \', or ` dep3.h dep4.h \'.
# Do two passes, one to just change these to
# `$object: dependent.h' and one to simply `dependent.h:'.
sed "s,^[^:]*:,$object :," < "$tmpdepfile" > "$depfile"
# Some versions of the HPUX 10.20 sed can't process this invocation
# correctly. Breaking it into two sed invocations is a workaround.
sed 's,^[^:]*: \(.*\)$,\1,;s/^\\$//;/^$/d;/:$/d' < "$tmpdepfile" \
| sed -e 's/$/ :/' >> "$depfile"
rm -f "$tmpdepfile"
;;
hp2)
# The "hp" stanza above does not work with aCC (C++) and HP's ia64
# compilers, which have integrated preprocessors. The correct option
# to use with these is +Maked; it writes dependencies to a file named
# 'foo.d', which lands next to the object file, wherever that
# happens to be.
# Much of this is similar to the tru64 case; see comments there.
set_dir_from "$object"
set_base_from "$object"
if test "$libtool" = yes; then
tmpdepfile1=$dir$base.d
tmpdepfile2=$dir.libs/$base.d
"$@" -Wc,+Maked
else
tmpdepfile1=$dir$base.d
tmpdepfile2=$dir$base.d
"$@" +Maked
fi
stat=$?
if test $stat -ne 0; then
rm -f "$tmpdepfile1" "$tmpdepfile2"
exit $stat
fi
for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2"
do
test -f "$tmpdepfile" && break
done
if test -f "$tmpdepfile"; then
sed -e "s,^.*\.[$lower]*:,$object:," "$tmpdepfile" > "$depfile"
# Add 'dependent.h:' lines.
sed -ne '2,${
s/^ *//
s/ \\*$//
s/$/:/
p
}' "$tmpdepfile" >> "$depfile"
else
make_dummy_depfile
fi
rm -f "$tmpdepfile" "$tmpdepfile2"
;;
tru64)
# The Tru64 compiler uses -MD to generate dependencies as a side
# effect. 'cc -MD -o foo.o ...' puts the dependencies into 'foo.o.d'.
# At least on Alpha/Redhat 6.1, Compaq CCC V6.2-504 seems to put
# dependencies in 'foo.d' instead, so we check for that too.
# Subdirectories are respected.
set_dir_from "$object"
set_base_from "$object"
if test "$libtool" = yes; then
# Libtool generates 2 separate objects for the 2 libraries. These
# two compilations output dependencies in $dir.libs/$base.o.d and
# in $dir$base.o.d. We have to check for both files, because
# one of the two compilations can be disabled. We should prefer
# $dir$base.o.d over $dir.libs/$base.o.d because the latter is
# automatically cleaned when .libs/ is deleted, while ignoring
# the former would cause a distcleancheck panic.
tmpdepfile1=$dir$base.o.d # libtool 1.5
tmpdepfile2=$dir.libs/$base.o.d # Likewise.
tmpdepfile3=$dir.libs/$base.d # Compaq CCC V6.2-504
"$@" -Wc,-MD
else
tmpdepfile1=$dir$base.d
tmpdepfile2=$dir$base.d
tmpdepfile3=$dir$base.d
"$@" -MD
fi
stat=$?
if test $stat -ne 0; then
rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3"
exit $stat
fi
for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3"
do
test -f "$tmpdepfile" && break
done
# Same post-processing that is required for AIX mode.
aix_post_process_depfile
;;
msvc7)
if test "$libtool" = yes; then
showIncludes=-Wc,-showIncludes
else
showIncludes=-showIncludes
fi
"$@" $showIncludes > "$tmpdepfile"
stat=$?
grep -v '^Note: including file: ' "$tmpdepfile"
if test $stat -ne 0; then
rm -f "$tmpdepfile"
exit $stat
fi
rm -f "$depfile"
echo "$object : \\" > "$depfile"
# The first sed program below extracts the file names and escapes
# backslashes for cygpath. The second sed program outputs the file
# name when reading, but also accumulates all include files in the
# hold buffer in order to output them again at the end. This only
# works with sed implementations that can handle large buffers.
sed < "$tmpdepfile" -n '
/^Note: including file: *\(.*\)/ {
s//\1/
s/\\/\\\\/g
p
}' | $cygpath_u | sort -u | sed -n '
s/ /\\ /g
s/\(.*\)/'"$tab"'\1 \\/p
s/.\(.*\) \\/\1:/
H
$ {
s/.*/'"$tab"'/
G
p
}' >> "$depfile"
echo >> "$depfile" # make sure the fragment doesn't end with a backslash
rm -f "$tmpdepfile"
;;
msvc7msys)
# This case exists only to let depend.m4 do its work. It works by
# looking at the text of this script. This case will never be run,
# since it is checked for above.
exit 1
;;
#nosideeffect)
# This comment above is used by automake to tell side-effect
# dependency tracking mechanisms from slower ones.
dashmstdout)
# Important note: in order to support this mode, a compiler *must*
# always write the preprocessed file to stdout, regardless of -o.
"$@" || exit $?
# Remove the call to Libtool.
if test "$libtool" = yes; then
while test "X$1" != 'X--mode=compile'; do
shift
done
shift
fi
# Remove '-o $object'.
IFS=" "
for arg
do
case $arg in
-o)
shift
;;
$object)
shift
;;
*)
set fnord "$@" "$arg"
shift # fnord
shift # $arg
;;
esac
done
test -z "$dashmflag" && dashmflag=-M
# Require at least two characters before searching for ':'
# in the target name. This is to cope with DOS-style filenames:
# a dependency such as 'c:/foo/bar' could be seen as target 'c' otherwise.
"$@" $dashmflag |
sed "s|^[$tab ]*[^:$tab ][^:][^:]*:[$tab ]*|$object: |" > "$tmpdepfile"
rm -f "$depfile"
cat < "$tmpdepfile" > "$depfile"
# Some versions of the HPUX 10.20 sed can't process this sed invocation
# correctly. Breaking it into two sed invocations is a workaround.
tr ' ' "$nl" < "$tmpdepfile" \
| sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' \
| sed -e 's/$/ :/' >> "$depfile"
rm -f "$tmpdepfile"
;;
dashXmstdout)
# This case only exists to satisfy depend.m4. It is never actually
# run, as this mode is specially recognized in the preamble.
exit 1
;;
makedepend)
"$@" || exit $?
# Remove any Libtool call
if test "$libtool" = yes; then
while test "X$1" != 'X--mode=compile'; do
shift
done
shift
fi
# X makedepend
shift
cleared=no eat=no
for arg
do
case $cleared in
no)
set ""; shift
cleared=yes ;;
esac
if test $eat = yes; then
eat=no
continue
fi
case "$arg" in
-D*|-I*)
set fnord "$@" "$arg"; shift ;;
# Strip any option that makedepend may not understand. Remove
# the object too, otherwise makedepend will parse it as a source file.
-arch)
eat=yes ;;
-*|$object)
;;
*)
set fnord "$@" "$arg"; shift ;;
esac
done
obj_suffix=`echo "$object" | sed 's/^.*\././'`
touch "$tmpdepfile"
${MAKEDEPEND-makedepend} -o"$obj_suffix" -f"$tmpdepfile" "$@"
rm -f "$depfile"
# makedepend may prepend the VPATH from the source file name to the object.
# No need to regex-escape $object, excess matching of '.' is harmless.
sed "s|^.*\($object *:\)|\1|" "$tmpdepfile" > "$depfile"
# Some versions of the HPUX 10.20 sed can't process the last invocation
# correctly. Breaking it into two sed invocations is a workaround.
sed '1,2d' "$tmpdepfile" \
| tr ' ' "$nl" \
| sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' \
| sed -e 's/$/ :/' >> "$depfile"
rm -f "$tmpdepfile" "$tmpdepfile".bak
;;
cpp)
# Important note: in order to support this mode, a compiler *must*
# always write the preprocessed file to stdout.
"$@" || exit $?
# Remove the call to Libtool.
if test "$libtool" = yes; then
while test "X$1" != 'X--mode=compile'; do
shift
done
shift
fi
# Remove '-o $object'.
IFS=" "
for arg
do
case $arg in
-o)
shift
;;
$object)
shift
;;
*)
set fnord "$@" "$arg"
shift # fnord
shift # $arg
;;
esac
done
"$@" -E \
| sed -n -e '/^# [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' \
-e '/^#line [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' \
| sed '$ s: \\$::' > "$tmpdepfile"
rm -f "$depfile"
echo "$object : \\" > "$depfile"
cat < "$tmpdepfile" >> "$depfile"
sed < "$tmpdepfile" '/^$/d;s/^ //;s/ \\$//;s/$/ :/' >> "$depfile"
rm -f "$tmpdepfile"
;;
msvisualcpp)
# Important note: in order to support this mode, a compiler *must*
# always write the preprocessed file to stdout.
"$@" || exit $?
# Remove the call to Libtool.
if test "$libtool" = yes; then
while test "X$1" != 'X--mode=compile'; do
shift
done
shift
fi
IFS=" "
for arg
do
case "$arg" in
-o)
shift
;;
$object)
shift
;;
"-Gm"|"/Gm"|"-Gi"|"/Gi"|"-ZI"|"/ZI")
set fnord "$@"
shift
shift
;;
*)
set fnord "$@" "$arg"
shift
shift
;;
esac
done
"$@" -E 2>/dev/null |
sed -n '/^#line [0-9][0-9]* "\([^"]*\)"/ s::\1:p' | $cygpath_u | sort -u > "$tmpdepfile"
rm -f "$depfile"
echo "$object : \\" > "$depfile"
sed < "$tmpdepfile" -n -e 's% %\\ %g' -e '/^\(.*\)$/ s::'"$tab"'\1 \\:p' >> "$depfile"
echo "$tab" >> "$depfile"
sed < "$tmpdepfile" -n -e 's% %\\ %g' -e '/^\(.*\)$/ s::\1\::p' >> "$depfile"
rm -f "$tmpdepfile"
;;
msvcmsys)
# This case exists only to let depend.m4 do its work. It works by
# looking at the text of this script. This case will never be run,
# since it is checked for above.
exit 1
;;
none)
exec "$@"
;;
*)
echo "Unknown depmode $depmode" 1>&2
exit 1
;;
esac
exit 0
# Local Variables:
# mode: shell-script
# sh-indentation: 2
# eval: (add-hook 'before-save-hook 'time-stamp)
# time-stamp-start: "scriptversion="
# time-stamp-format: "%:y-%02m-%02d.%02H"
# time-stamp-time-zone: "UTC0"
# time-stamp-end: "; # UTC"
# End:
pekwm-0.4.4/missing 0000755 0001750 0001750 00000017060 15126246531 007733 #! /bin/sh
# Common wrapper for a few potentially missing GNU and other programs.
scriptversion=2024-06-07.14; # UTC
# shellcheck disable=SC2006,SC2268 # we must support pre-POSIX shells
# Copyright (C) 1996-2024 Free Software Foundation, Inc.
# Originally written by Fran,cois Pinard , 1996.
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2, or (at your option)
# any later version.
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
# You should have received a copy of the GNU General Public License
# along with this program. If not, see .
# As a special exception to the GNU General Public License, if you
# distribute this file as part of a program that contains a
# configuration script generated by Autoconf, you may include it under
# the same distribution terms that you use for the rest of that program.
if test $# -eq 0; then
echo 1>&2 "Try '$0 --help' for more information"
exit 1
fi
case $1 in
--is-lightweight)
# Used by our autoconf macros to check whether the available missing
# script is modern enough.
exit 0
;;
--run)
# Back-compat with the calling convention used by older automake.
shift
;;
-h|--h|--he|--hel|--help)
echo "\
$0 [OPTION]... PROGRAM [ARGUMENT]...
Run 'PROGRAM [ARGUMENT]...', returning a proper advice when this fails due
to PROGRAM being missing or too old.
Options:
-h, --help display this help and exit
-v, --version output version information and exit
Supported PROGRAM values:
aclocal autoconf autogen autoheader autom4te automake autoreconf
bison flex help2man lex makeinfo perl yacc
Version suffixes to PROGRAM as well as the prefixes 'gnu-', 'gnu', and
'g' are ignored when checking the name.
Report bugs to .
GNU Automake home page: .
General help using GNU software: ."
exit $?
;;
-v|--v|--ve|--ver|--vers|--versi|--versio|--version)
echo "missing (GNU Automake) $scriptversion"
exit $?
;;
-*)
echo 1>&2 "$0: unknown '$1' option"
echo 1>&2 "Try '$0 --help' for more information"
exit 1
;;
esac
# Run the given program, remember its exit status.
"$@"; st=$?
# If it succeeded, we are done.
test $st -eq 0 && exit 0
# Also exit now if we it failed (or wasn't found), and '--version' was
# passed; such an option is passed most likely to detect whether the
# program is present and works.
case $2 in --version|--help) exit $st;; esac
# Exit code 63 means version mismatch. This often happens when the user
# tries to use an ancient version of a tool on a file that requires a
# minimum version.
if test $st -eq 63; then
msg="probably too old"
elif test $st -eq 127; then
# Program was missing.
msg="missing on your system"
else
# Program was found and executed, but failed. Give up.
exit $st
fi
perl_URL=https://www.perl.org/
flex_URL=https://github.com/westes/flex
gnu_software_URL=https://www.gnu.org/software
program_details ()
{
case $1 in
aclocal|automake|autoreconf)
echo "The '$1' program is part of the GNU Automake package:"
echo "<$gnu_software_URL/automake>"
echo "It also requires GNU Autoconf, GNU m4 and Perl in order to run:"
echo "<$gnu_software_URL/autoconf>"
echo "<$gnu_software_URL/m4/>"
echo "<$perl_URL>"
;;
autoconf|autom4te|autoheader)
echo "The '$1' program is part of the GNU Autoconf package:"
echo "<$gnu_software_URL/autoconf/>"
echo "It also requires GNU m4 and Perl in order to run:"
echo "<$gnu_software_URL/m4/>"
echo "<$perl_URL>"
;;
*)
:
;;
esac
}
give_advice ()
{
# Normalize program name to check for.
normalized_program=`echo "$1" | sed '
s/^gnu-//; t
s/^gnu//; t
s/^g//; t'`
printf '%s\n' "'$1' is $msg."
configure_deps="'configure.ac' or m4 files included by 'configure.ac'"
autoheader_deps="'acconfig.h'"
automake_deps="'Makefile.am'"
aclocal_deps="'acinclude.m4'"
case $normalized_program in
aclocal*)
echo "You should only need it if you modified $aclocal_deps or"
echo "$configure_deps."
;;
autoconf*)
echo "You should only need it if you modified $configure_deps."
;;
autogen*)
echo "You should only need it if you modified a '.def' or '.tpl' file."
echo "You may want to install the GNU AutoGen package:"
echo "<$gnu_software_URL/autogen/>"
;;
autoheader*)
echo "You should only need it if you modified $autoheader_deps or"
echo "$configure_deps."
;;
automake*)
echo "You should only need it if you modified $automake_deps or"
echo "$configure_deps."
;;
autom4te*)
echo "You might have modified some maintainer files that require"
echo "the 'autom4te' program to be rebuilt."
;;
autoreconf*)
echo "You should only need it if you modified $aclocal_deps or"
echo "$automake_deps or $autoheader_deps or $automake_deps or"
echo "$configure_deps."
;;
bison*|yacc*)
echo "You should only need it if you modified a '.y' file."
echo "You may want to install the GNU Bison package:"
echo "<$gnu_software_URL/bison/>"
;;
help2man*)
echo "You should only need it if you modified a dependency" \
"of a man page."
echo "You may want to install the GNU Help2man package:"
echo "<$gnu_software_URL/help2man/>"
;;
lex*|flex*)
echo "You should only need it if you modified a '.l' file."
echo "You may want to install the Fast Lexical Analyzer package:"
echo "<$flex_URL>"
;;
makeinfo*)
echo "You should only need it if you modified a '.texi' file, or"
echo "any other file indirectly affecting the aspect of the manual."
echo "You might want to install the Texinfo package:"
echo "<$gnu_software_URL/texinfo/>"
echo "The spurious makeinfo call might also be the consequence of"
echo "using a buggy 'make' (AIX, DU, IRIX), in which case you might"
echo "want to install GNU make:"
echo "<$gnu_software_URL/make/>"
;;
perl*)
echo "You should only need it to run GNU Autoconf, GNU Automake, "
echo " assorted other tools, or if you modified a Perl source file."
echo "You may want to install the Perl 5 language interpreter:"
echo "<$perl_URL>"
;;
*)
echo "You might have modified some files without having the proper"
echo "tools for further handling them. Check the 'README' file, it"
echo "often tells you about the needed prerequisites for installing"
echo "this package. You may also peek at any GNU archive site, in"
echo "case some other package contains this missing '$1' program."
;;
esac
program_details "$normalized_program"
}
give_advice "$1" | sed -e '1s/^/WARNING: /' \
-e '2,$s/^/ /' >&2
# Propagate the correct exit status (expected to be 127 for a program
# not found, 63 for a program that failed due to version mismatch).
exit $st
# Local variables:
# eval: (add-hook 'before-save-hook 'time-stamp)
# time-stamp-start: "scriptversion="
# time-stamp-format: "%:y-%02m-%02d.%02H"
# time-stamp-time-zone: "UTC0"
# time-stamp-end: "; # UTC"
# End:
pekwm-0.4.4/CMakeLists.txt 0000664 0001750 0001750 00000025755 15164641451 011112 cmake_minimum_required(VERSION 3.10)
set(CMAKE_MODULE_PATH ${CMAKE_MODULE_PATH} "${CMAKE_SOURCE_DIR}/CMake/Modules/")
project(pekwm)
set(pekwm_VERSION_MAJOR 0)
set(pekwm_VERSION_MINOR 4)
set(pekwm_VERSION_PATCH 4)
set(pekwm_VERSION
"${pekwm_VERSION_MAJOR}.${pekwm_VERSION_MINOR}.${pekwm_VERSION_PATCH}")
set(PEKWM_THEMES "https://www.pekwm.se/themes" CACHE STRING
"base url where theme index resides, without ending /")
# Check for C++98
set(CMAKE_CXX_STANDARD 98)
# Export compile commands, LSP integrations
set(CMAKE_EXPORT_COMPILE_COMMANDS ON)
include(CheckTypeSize)
include(CheckCXXCompilerFlag)
include(CheckCXXSourceCompiles)
include(CheckCXXSymbolExists)
include(CheckIncludeFile)
include(CheckIncludeFileCXX)
include(GNUInstallDirs)
include(FindPkgConfig)
include(FindCURL)
# Look for dependencies
find_package(X11 REQUIRED)
check_include_file_cxx(limits PEKWM_HAVE_LIMITS)
if (NOT PEKWM_HAVE_LIMITS)
check_include_file(sys/limits.h PEKWM_HAVE_SYS_LIMITS_H)
endif (NOT PEKWM_HAVE_LIMITS)
check_include_file(stdint.h PEKWM_HAVE_STDINT_H)
check_include_file_cxx(locale PEKWM_HAVE_LOCALE)
if (PEKWM_HAVE_LOCALE)
check_cxx_source_compiles("
#include
int main() {
std::locale num_locale(\"\");
std::locale locale = std::locale().combine >(num_locale);
return 0;
}
" PEKWM_HAVE_LOCALE_COMBINE)
else()
check_include_file(locale.h PEKWM_HAVE_LOCALE_H REQUIRED)
endif (PEKWM_HAVE_LOCALE)
check_function_exists(localtime_r PEKWM_HAVE_LOCALTIME_R REQUIRED)
# Add work-around for missing -std=c++98 flag when running the
# check_cxx_source_compiles tests
set(orig_CMAKE_CXX_FLAGS ${CMAKE_CXX98_FLAGS})
set(CMAKE_CXX_FLAGS ${CMAKE_CXX98_STANDARD_COMPILE_OPTION})
check_cxx_source_compiles("
#include
#include
int main() { std::tm tm = {0}; std::cout << std::put_time(&tm, \"%S\");
return 0; }
" PEKWM_HAVE_PUT_TIME)
check_cxx_source_compiles("
#include
#include
int main() { std::to_string(42); return 0; }
" PEKWM_HAVE_TO_STRING)
check_cxx_source_compiles("
#include
int main() { std::stod(\"42.2\"); return 0; }
" PEKWM_HAVE_STOD)
check_cxx_source_compiles("
#include
int main() { std::size_t pos; std::stoi(\"42\", &pos, 10); return 0; }
" PEKWM_HAVE_STOI)
check_cxx_source_compiles("
#include
int main() { std::stof(\"42.0\"); return 0; }
" PEKWM_HAVE_STOF)
check_cxx_source_compiles("
extern \"C\" {
#include
}
int main() { double val = NAN; return 0; }
" PEKWM_HAVE_NAN)
set(CMAKE_CXX_FLAGS ${orig_CMAKE_CXX_FLAGS})
# Look for platform specific methods
check_function_exists(execvpe PEKWM_HAVE_EXECVPE)
check_function_exists(setenv PEKWM_HAVE_SETENV)
check_function_exists(unsetenv PEKWM_HAVE_UNSETENV)
check_function_exists(daemon PEKWM_HAVE_DAEMON)
check_function_exists(clock_gettime PEKWM_HAVE_CLOCK_GETTIME)
check_function_exists(pledge PEKWM_HAVE_PLEDGE)
check_function_exists(timegm PEKWM_HAVE_TIMEGM)
check_cxx_symbol_exists(timersub sys/time.h PEKWM_HAVE_TIMERSUB)
check_cxx_symbol_exists(environ unistd.h PEKWM_HAVE_ENVIRON)
# Look for modern X11 functions
set(CMAKE_REQUIRED_INCLUDES ${X11_INCLUDE_DIR})
set(CMAKE_EXTRA_INCLUDE_FILES "X11/Intrinsic.h")
check_type_size(Cardinal CARDINAL)
set(CMAKE_EXTRA_INCLUDE_FILES "")
set(CMAKE_REQUIRED_LIBRARIES ${X11_LIBRARIES})
check_cxx_symbol_exists(Xutf8SetWMProperties X11/Xutil.h PEKWM_HAVE_XUTF8)
# Look for platform specific tools
message(STATUS "Looking for program awk")
find_program(AWK awk
PATHS /usr/pkg/bin /usr/xpg4/bin /usr/local/bin /usr/bin /bin
NO_DEFAULT_PATH
REQUIRED)
message(STATUS "Looking for program awk - ${AWK}")
message(STATUS "Looking for program grep")
find_program(GREP ggrep grep
PATHS /usr/pkg/bin /usr/sfw/bin /usr/local/bin /usr/bin /bin
NO_DEFAULT_PATH
REQUIRED)
message(STATUS "Looking for program grep - ${GREP}")
message(STATUS "Looking for program sed")
find_program(SED gsed sed
PATHS /usr/pkg/bin /usr/sfw/bin /usr/local/bin /usr/bin /bin
NO_DEFAULT_PATH
REQUIRED)
message(STATUS "Looking for program sed - ${SED}")
message(STATUS "Looking for program sh")
find_program(SH sh
PATHS /usr/pkg/bin /usr/xpg4/bin /usr/local/bin /usr/bin /bin
NO_DEFAULT_PATH
REQUIRED)
message(STATUS "Looking for program sh - ${SH}")
# Optons
option(ENABLE_SHAPE "include support for Xshape" ON)
option(ENABLE_XDBE "include support for XDBE" ON)
option(ENABLE_XINERAMA "include support for Xinerama" ON)
option(ENABLE_RANDR "include support for Xrandr" ON)
option(ENABLE_XFT "include support for Xft font rendering" ON)
option(ENABLE_PANGO "include support for Pango font rendering" ON)
option(ENABLE_IMAGE_JPEG "include support for JPEG images" ON)
option(ENABLE_IMAGE_PNG "include support for PNG images" ON)
option(ENABLE_IMAGE_XPM "include support for XPM images" ON)
option(ENABLE_CURL "include support for CURL HTTP client" ON)
option(ENABLE_LIBUDEV "include support for libudev" ON)
option(PEDANTIC "turn on strict compile-time warnings" OFF)
option(TESTS "include tests" OFF)
option(DEV "include development tools" OFF)
if (TESTS)
set(PEKWM_HAVE_TESTS 1)
endif (TESTS)
if (ENABLE_XFT)
find_package(Freetype)
endif (ENABLE_XFT)
if (ENABLE_PANGO)
pkg_check_modules(PANGO pango>=1.44)
pkg_check_modules(PANGOCAIRO pangocairo)
pkg_check_modules(PANGOXFT pangoxft)
endif (ENABLE_PANGO)
if (ENABLE_IMAGE_JPEG)
find_package(JPEG)
endif (ENABLE_IMAGE_JPEG)
if (ENABLE_IMAGE_PNG)
find_package(PNG)
endif (ENABLE_IMAGE_PNG)
if (ENABLE_LIBUDEV)
pkg_check_modules(LIBUDEV libudev>=100)
endif (ENABLE_LIBUDEV)
# setup compile/link flags, one location for sharing between the different
# compile directories
set(common_INCLUDE_DIRS
${PROJECT_BINARY_DIR}/src
${PROJECT_SOURCE_DIR}/src/lib
${X11_INCLUDE_DIR})
set(common_LIBRARIES ${X11_LIBRARIES})
if (ENABLE_SHAPE AND X11_Xshape_FOUND)
set(pekwm_FEATURES "${pekwm_FEATURES} XShape")
set(PEKWM_HAVE_SHAPE 1)
set(common_INCLUDE_DIRS ${common_INCLUDE_DIRS}
${X11_Xshape_INCLUDE_PATH})
set(common_LIBRARIES ${common_LIBRARIES} ${X11_Xshape_LIB})
endif (ENABLE_SHAPE AND X11_Xshape_FOUND)
if (ENABLE_XDBE AND X11_Xext_FOUND)
set(pekwm_FEATURES "${pekwm_FEATURES} XDBE")
set(PEKWM_HAVE_XDBE 1)
set(common_LIBRARIES ${common_LIBRARIES} ${X11_Xext_LIB})
endif (ENABLE_XDBE AND X11_Xext_FOUND)
if (ENABLE_XINERAMA AND X11_Xinerama_FOUND)
set(pekwm_FEATURES "${pekwm_FEATURES} Xinerama")
set(PEKWM_HAVE_XINERAMA 1)
set(common_INCLUDE_DIRS ${common_INCLUDE_DIRS}
${X11_Xinerama_INCLUDE_PATH})
set(common_LIBRARIES ${common_LIBRARIES} ${X11_Xinerama_LIB})
endif (ENABLE_XINERAMA AND X11_Xinerama_FOUND)
if (ENABLE_XFT AND X11_Xft_FOUND AND FREETYPE_FOUND)
set(pekwm_FEATURES "${pekwm_FEATURES} Xft")
set(PEKWM_HAVE_XFT 1)
set(common_INCLUDE_DIRS ${common_INCLUDE_DIRS} ${X11_Xft_INCLUDE_PATH}
${FREETYPE_INCLUDE_DIRS})
set(common_LIBRARIES ${common_LIBRARIES} ${X11_Xft_LIB}
${FREETYPE_LIBRARIES})
endif (ENABLE_XFT AND X11_Xft_FOUND AND FREETYPE_FOUND)
if (ENABLE_PANGO AND PANGO_FOUND)
set(common_INCLUDE_DIRS ${common_INCLUDE_DIRS} ${PANGO_INCLUDE_DIRS})
set(common_LIBRARIES ${common_LIBRARIES} ${PANGO_LINK_LIBRARIES})
set(PEKWM_HAVE_PANGO 1)
if (PANGOCAIRO_FOUND)
set(pekwm_FEATURES "${pekwm_FEATURES} PangoCairo")
set(PEKWM_HAVE_PANGO_CAIRO 1)
set(common_INCLUDE_DIRS ${common_INCLUDE_DIRS}
${PANGOCAIRO_INCLUDE_DIRS})
set(common_LIBRARIES ${common_LIBRARIES}
${PANGOCAIRO_LINK_LIBRARIES})
endif (PANGOCAIRO_FOUND)
if (PANGOXFT_FOUND)
set(pekwm_FEATURES "${pekwm_FEATURES} PangoXft")
set(PEKWM_HAVE_PANGO_XFT 1)
set(common_INCLUDE_DIRS ${common_INCLUDE_DIRS}
${PANGOXFT_INCLUDE_DIRS})
set(common_LIBRARIES ${common_LIBRARIES}
${PANGOXFT_LINK_LIBRARIES})
endif (PANGOXFT_FOUND)
endif (ENABLE_PANGO AND PANGO_FOUND)
if (ENABLE_IMAGE_JPEG AND JPEG_FOUND)
set(pekwm_FEATURES "${pekwm_FEATURES} image-jpeg")
set(PEKWM_HAVE_IMAGE_JPEG 1)
set(common_INCLUDE_DIRS ${common_INCLUDE_DIRS} ${JPEG_INCLUDE_DIR})
set(common_LIBRARIES ${common_LIBRARIES} ${JPEG_LIBRARY})
endif (ENABLE_IMAGE_JPEG AND JPEG_FOUND)
if (ENABLE_IMAGE_PNG AND PNG_FOUND)
set(pekwm_FEATURES "${pekwm_FEATURES} image-png")
set(PEKWM_HAVE_IMAGE_PNG 1)
set(common_INCLUDE_DIRS ${common_INCLUDE_DIRS} ${PNG_INCLUDE_DIR})
set(common_LIBRARIES ${common_LIBRARIES} ${PNG_LIBRARY_RELEASE})
endif (ENABLE_IMAGE_PNG AND PNG_FOUND)
if (ENABLE_IMAGE_XPM AND X11_Xpm_FOUND)
set(pekwm_FEATURES "${pekwm_FEATURES} image-xpm")
set(PEKWM_HAVE_IMAGE_XPM 1)
set(common_INCLUDE_DIRS ${common_INCLUDE_DIRS} ${X11_Xpm_INCLUDE_PATH})
set(common_LIBRARIES ${common_LIBRARIES} ${X11_Xpm_LIB})
endif (ENABLE_IMAGE_XPM AND X11_Xpm_FOUND)
if (ENABLE_RANDR AND X11_Xrandr_FOUND)
set(pekwm_FEATURES "${pekwm_FEATURES} Xrandr")
set(PEKWM_HAVE_XRANDR 1)
set(common_INCLUDE_DIRS ${common_INCLUDE_DIRS}
${X11_Xrandr_INCLUDE_PATH})
set(common_LIBRARIES ${common_LIBRARIES} ${X11_Xrandr_LIB})
set(CMAKE_REQUIRED_LIBRARIES ${X11_LIBRARIES} ${X11_Xrandr_LIB})
check_symbol_exists(XRRGetOutputPrimary X11/extensions/Xrandr.h
PEKWM_HAVE_XRRGETOUTPUTPRIMARY)
endif (ENABLE_RANDR AND X11_Xrandr_FOUND)
if (ENABLE_CURL AND CURL_FOUND)
set(pekwm_FEATURES "${pekwm_FEATURES} curl")
set(common_INCLUDE_DIRS ${common_INCLUDE_DIRS} ${CURL_INCLUDE_DIRS})
set(common_LIBRARIES ${common_LIBRARIES} ${CURL_LIBRARIES})
set(PEKWM_HAVE_CURL 1)
endif (ENABLE_CURL AND CURL_FOUND)
if (ENABLE_LIBUDEV AND LIBUDEV_FOUND)
set(pekwm_FEATURES "${pekwm_FEATURES} libudev")
set(common_INCLUDE_DIRS ${common_INCLUDE_DIRS} ${LIBUDEV_INCLUDE_DIRS})
set(common_LIBRARIES ${common_LIBRARIES} ${LIBUDEV_LINK_LIBRARIES})
set(PEKWM_HAVE_LIBUDEV 1)
endif (ENABLE_LIBUDEV AND LIBUDEV_FOUND)
if (CMAKE_BUILD_TYPE MATCHES Debug)
set(pekwm_FEATURES "${pekwm_FEATURES} debug")
set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -g -O0 -Wall")
endif (CMAKE_BUILD_TYPE MATCHES Debug)
if (PEDANTIC)
set(pekwm_FEATURES "${pekwm_FEATURES} pedantic")
# Using C++98 with modern headers cause -pedantic to error out,
# no longer use -Werror for that reason. (long long is C++11)
set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -Wall -pedantic")
check_cxx_compiler_flag("-Wno-variadic-macros" NO_VARIADIC_MACROS)
if (NO_VARIADIC_MACROS)
set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -Wno-variadic-macros")
endif (NO_VARIADIC_MACROS)
endif (PEDANTIC)
# check after pedantic check, -Wall -pedantic will cause this to fail if
# missing/ignored
check_cxx_source_compiles("
#pragma GCC diagnostic push
#pragma GCC diagnostic ignored \"-Wdeprecated-declarations\"
int main() { return 0; }
" PEKWM_HAVE_GCC_DIAGNOSTICS_PUSH)
add_definitions(-DVERSION="${pekwm_VERSION}"
-DFEATURES="${pekwm_FEATURES}"
-DBINDIR="${CMAKE_INSTALL_PREFIX}/bin"
-DDATADIR="${CMAKE_INSTALL_PREFIX}/share"
-DSYSCONFDIR="${CMAKE_INSTALL_FULL_SYSCONFDIR}/pekwm")
set(CMAKE_INSTALL_RPATH_USE_LINK_PATH True)
# Subdirectories
add_subdirectory(contrib)
add_subdirectory(data)
add_subdirectory(doc)
add_subdirectory(src)
if (DEV)
add_subdirectory(dev)
endif (DEV)
if (TESTS)
enable_testing()
add_subdirectory(test)
endif (TESTS)
pekwm-0.4.4/contrib/ 0000775 0001750 0001750 00000000000 15164641624 010056 5 pekwm-0.4.4/contrib/lobo/ 0000775 0001750 0001750 00000000000 15164641624 011011 5 pekwm-0.4.4/contrib/lobo/pekwm_menu_config.pl.vars 0000664 0001750 0001750 00000015661 15126136025 015735 ' pekwm_menu_config.pl variable list
' this is a comment
' int|Section/VarName|Description|Minimum value|Maxiumum value
int|CmdDialog/HistorySaveInterval|Defines how often the history file should be saved counting each time the CmdDialog finish a command. Default 16.|0|100
int|CmdDialog/HistorySize|Number of entries in the history that should be kept track of. Default 1024.|0|2000
int|Harbour/DockApp/SideMax|Controls the maximum size of dockapp clients. If a dockapp client is larger than the maximum, it gets resized down to the SideMax value. Integer is a number of pixels.|0|100
int|Harbour/DockApp/SideMin|Controls the minimum size of dockapp clients. If a dockapp client is smaller than the minimum, it gets resized up to the SideMin value. Integer is a number of pixels.|0|100
int|Harbour/Head|When RandR or Xinerama is on, decides on what head the harbour resides on. Integer is the head number.|0|20
int|MoveResize/EdgeAttract|The distance from screen edge required for the window to snap against it in pixels.|0|100
int|MoveResize/EdgeResist|The distance from screen edge required for the window moving to start being resisted in pixels.|0|100
int|MoveResize/WindowAttract|The distance from other clients that a window will snap against them to in pixels.|0|100
int|MoveResize/WindowResist|The distance from other clients that a window movement will start being resisted.|0|100
int|Screen/DoubleClickTime|Time, in milliseconds, between clicks to be counted as a doubleclick.|0|1000|
int|Screen/Placement/Smart/OffsetX|Pixels to leave between new and old windows and screen edges. When 0, no space is reserved.|0|100
int|Screen/Placement/Smart/OffsetY|Pixels to leave between new and old windows and screen edges. When 0, no space is reserved.|0|100
int|Screen/ShowWorkspaceIndicator|Show WorkspaceIndicator for N milliseconds. If set to less than 1, the WorkspaceIndicator is disabled.|0|3000
int|Screen/Workspaces|Number of workspaces enabled.|0|20
int|Screen/WorkspaceIndicatorScale|Changes the size of the WorkspaceIndicator, higher value means smaller size.|0|100
int|Screen/WorkspacesPerRow|Number of workspaces on each row. Value less than 1 fits all workspaces on a single row.|0|20
' string|Section/VarName|Description
string|Screen/EdgeSize|How many pixels from the edge of the screen should screen edges be. Parameters correspond to the following edges: top bottom left right. A value of 0 disables edges.
string|Screen/UniqueNames/Post|String to place after the unique client number.
string|Screen/UniqueNames/Pre|String to place before the unique client number.
string|Screen/TrimTitle|This string contains what pekwm uses to trim down overlong window titles. If it's empty, no trimming down is performed at all.
string|Screen/WorkspaceNames|List of names for workspaces separated by ;.
' file|Section/VarName|Description
file|CmdDialog/HistoryFile|Path to history file where history is persisted between session. Default ~/.pekwm/history
file|Files/AutoProps|The location of the autoprops file
file|Files/Keys|The location of the keys file
file|Files/Menu|The location of the menu file
file|Files/Mouse|The location of the mouse file
file|Files/Start|The location of the start file
' dir|Section/VarName|Description
dir|Files/Icons|The location of the icons directory
dir|Files/Theme|The location of the Theme directory
' bool|Section/VarName|Description
bool|CmdDialog/HistoryUnique|If true, identical items in the history will only appear once where the most recently used is the first item. Default true.
bool|Harbour/MaximizeOver|Controls whether maximized clients will cover the harbour (true), or if they will stop at the edge of the harbour (false).
bool|Harbour/OnTop|Whether or not the harbour is \"always on top\"
bool|Menu/DisplayIcons|If true, turns on the drawing of application icons in menus.
bool|MoveResize/OpaqueMove|If true, turns on opaque Moving
bool|MoveResize/OpaqueResize|If true, turns on opaque Resizing
bool|Screen/EdgeIndent|Toggles if the screen edge should be reserved space.
bool|Screen/FocusNew|Toggles if new windows should be focused when they pop up.
bool|Screen/FullscreenAbove|Toggles restacking of windows when going to and from fullscreen mode. Windows are restacked to the top of all windows when going to fullscreen and to the top of their layer when being restored from fullscreen.
bool|Screen/FullscreenDetect|Toggles detection of broken fullscreen requests setting clients to fullscreen mode when requesting to be the size of the screen. Default true.
bool|Screen/HonourRandr|Toggles reading of XRANDR information, this can be disabled if the display driver gives both Xinerama and Randr information and only of the two is correct. Default true.
bool|Screen/PlaceNew|Toggles if new windows should be placed using the rules found in the Placement subsection, or just opened on the top left corner of your screen.
bool|Screen/Placement/Smart/LeftToRight|If false, the window is placed starting from the right.
bool|Screen/Placement/Smart/Row|Whether to use row or column placement, if true, uses row.
bool|Screen/Placement/Smart/TopToBottom|If false, the window is placed starting from the bottom.
bool|Screen/ShowClientID|Should Client IDs be displayed in window titles.
bool|Screen/ShowFrameList|Controls whether a list of all available frames on the workspace is displayed during the NextFrame/PrevFrame actions.
bool|Screen/ShowStatusWindow|Controls whether a size/position info window is shown when moving or resizing windows.
bool|Screen/UniqueNames/SetUnique|Decides if the feature is used or not. False or True.
' option|Section/VarName|Description|Opt1:Opt2:Opt3|Single = 0 Multi = 1
option|Harbour/Orientation|From what to which direction the harbour expands. One of TopToBottom, BottomToTop, RightToLeft, LeftToRight.|TopToBottom:BottomToTop:RightToLeft:LeftToRight|0
option|Harbour/Placement|Which edge to place the harbour on. One of Right, Left, Top, or Bottom.|Right:Left:Top:Bottom|0
option|Menu/Enter|Decides on what mouse events to enter a submenu. String is one of \"ButtonPress, ButtonRelease, DoubleClick, Motion, MotionPressed\"|ButtonPress:ButtonRelease:DoubleClick:Motion:MotionPressed|0
option|Menu/Exec|Decides on what mouse events to execute an entry. String is one of \"ButtonPress, ButtonRelease, DoubleClick, Motion, MotionPressed\"|ButtonPress:ButtonRelease:DoubleClick:Motion:MotionPressed|0
option|Menu/Select|Decides on what mouse events to select a menu entry. String is one of \"ButtonPress, ButtonRelease, DoubleClick, Motion\"|ButtonPress:ButtonRelease:DoubleClick:Motion|0
option|Screen/Placement/Model|Smart - Tries to place windows where no other window is present\nMouseCentered - Places the center of the window underneath the current mouse pointer position\nMouseTopLeft - Places the top-left corner of the window under the pointer\nMouseNotUnder - Places windows on screen corners avoiding the current mouse cursor position.\nCenteredOnParent - Places transient windows at center of their parent window.|Smart:MouseCentered:MouseTopLeft:MouseNotUnder:CenteredOnParent|1
pekwm-0.4.4/contrib/lobo/check.png 0000664 0001750 0001750 00000000323 15126136025 012502 ‰PNG
IHDR
PXê sRGB ®Î é pHYs šœ tIMEØ 3#w&br tEXtComment Created with GIMPW @IDATÓ¥ŽQ
Cgx==¬ Ð>„‚!Ú׃ۀ6@DJçîœdf‡SU ¼{ˆGDÂè·ÿ4ß{…Οϙ?ä ÿ²z£ IEND®B`‚ pekwm-0.4.4/contrib/lobo/CMakeLists.txt 0000664 0001750 0001750 00000000045 15126136025 013460 cmake_minimum_required(VERSION 3.10)
pekwm-0.4.4/contrib/lobo/pekwm_menu_config.pl 0000775 0001750 0001750 00000023312 15126136025 014756 #!/usr/bin/env perl
# pekwm_menu_config.pl
# Written by: Matt Hayes
#
# !!! Requires package 'zenity' for the GTK2 dialogs.
# !!! Back up your config, this will rewrite it in alphabetical order.
# Nothing usually goes wrong, but do it just to be safe.
#
# Generates a dynamic pekwm menu of all ~/.pekwm/config variables.
# For boolean values, clicking on the menu entry will toggle between
# 'True' or 'False'. Clicking on single integer values will pop up
# a scale dialog which has a graphical slider to select a new value.
# Any other values are treated as strings and will be edited by a
# graphical entry box.
#
# Add to your menu an entry like so:
#
# Submenu = "Config" {
# Entry { Actions = "Dynamic /path/to/pekwm_menu_config.pl --genmenu" }
# }
#
# Put check.png and uncheck.png in your icons directory (~/.pekwm/icons/).
use strict;
use warnings;
use Cwd qw(abs_path);
# Path to this script.
my $path = abs_path($0);
my $vars_path = $path.".vars";
# Config file
my $config_in = $ENV{'PEKWM_CONFIG_FILE'};
my $config_out = $config_in;
# Check command line arguments.
if ($ARGV[0] && $ARGV[0] eq "--genmenu") {
my $h = hashify($config_in);
print "Dynamic {\n";
gen_menu($h, "");
print "}\n";
} elsif ($ARGV[0] && $ARGV[1] && $ARGV[0] eq "--update") {
edit_var($ARGV[1]);
} else {
exit 0;
}
# edit_var(arg)
sub edit_var {
my $arg = shift;
my @sec = split(/\//, $arg);
my $hashref = hashify($config_in);
my $h = $hashref;
my $did = 0;
# Traverse to the needed section.
foreach my $i (0..$#sec - 1) {
$h = $h->{$sec[$i]};
}
# Read through the variables file.
open(INFILE, "<".$vars_path) or die "Could not find: ".$vars_path."\n";
while () {
# int
if ($_ =~ /int\|$arg\|(.+)\|(\d+)\|(\d+)/) {
edit_int($sec[$#sec], $h, $1, $2, $3);
$did = 1;
# file
} elsif ($_ =~ /file\|$arg\|(.+)/) {
edit_file($sec[$#sec], $h, $1);
$did = 1;
# dir
} elsif ($_ =~ /dir\|$arg\|(.+)/) {
edit_dir($sec[$#sec], $h, $1);
$did = 1;
# bool
} elsif ($_ =~ /bool\|$arg\|(.+)/) {
edit_bool($sec[$#sec], $h, $1);
$did = 1;
# option
} elsif ($_ =~ /option\|$arg\|(.+)\|(.+)\|(\d)/) {
edit_option($sec[$#sec], $h, $1, $2, $3);
$did = 1;
# string
} elsif ($_ =~ /string\|$arg\|(.+)/) {
edit_string($sec[$#sec], $h, $1);
$did = 1;
}
}
close(INFILE);
# If this variable does not have a vars entry, we will treat it
# as a string.
if (!$did) {
edit_string($sec[$#sec], $h, "No description available.");
}
# Write updated hash to file.
open my $fh, '>', $config_out or die "Could not open config for writing!\n";
write_hash($hashref, $fh, "");
close $fh;
# Reload pekwm
my $reload = `kill -HUP \$(xprop -root _NET_WM_PID | awk '/_NET_WM_PID/ { print \$3 }')`;
}
# edit_int(key, value, desc, min, max)
sub edit_int {
my ($key, $hashref, $desc, $min, $max) = @_;
my $nval;
my $value = $hashref->{$key};
# Check that we have the correct data type. If not, set the start
# value to the min value.
if (!($value =~ /\d+/)) {
$value = $min;
}
$nval = `zenity --title=\"$key\" --scale --text=\"$desc\" --value=$value --min-value=$min --max-value=$max --step=1`;
chomp($nval);
# If cancel wasn't pressed...
if ($nval) {
# Set to the new value.
$hashref->{$key} = $nval;
} else {
exit 0;
}
}
# edit_string(key, value, desc)
sub edit_string {
my ($key, $hashref, $desc) = @_;
my $nval = `zenity --title=\"$key\" --entry --text=\"$desc\" --entry-text=\"$hashref->{$key}\"`;
chomp($nval);
if ($nval) {
# Set to the new value.
$hashref->{$key} = $nval;
} else {
exit 0;
}
}
# edit_file(key, value, desc)
sub edit_file {
my ($key, $hashref, $desc) = @_;
my $nval = `zenity --title=\"$key\" --file-selection --text=\"$desc\" --filename=\"$hashref->{$key}\"`;
chomp($nval);
if ($nval) {
# Set to the new value.
$hashref->{$key} = $nval;
} else {
exit 0;
}
}
# edit_dir(key, value, desc)
sub edit_dir {
my ($key, $hashref, $desc) = @_;
my $nval = `zenity --title=\"$key\" --file-selection --directory --text=\"$desc\" --filename=\"$hashref->{$key}\"`;
chomp($nval);
if ($nval) {
# Set to the new value.
$hashref->{$key} = $nval;
} else {
exit 0;
}
}
# edit_bool(key, value, desc)
sub edit_bool {
my ($key, $hashref, $desc) = @_;
my ($TRUE, $FALSE);
if ($hashref->{$key} eq "True") {
$TRUE = "TRUE";
$FALSE = "FALSE";
} else {
$TRUE = "FALSE";
$FALSE = "TRUE";
}
my $nval = `zenity --title=\"$key\" --list --radiolist --text=\"$desc\" --column \"Check\" --column \"Option\" $TRUE True $FALSE False`;
chomp($nval);
if ($nval) {
# Set to the new value.
$hashref->{$key} = $nval;
} else {
exit 0;
}
}
# edit_bool(key, value, desc)
sub edit_option {
my ($key, $hashref, $desc, $opt, $multi) = @_;
my ($nval, $selstr, $tmp, $gotone, @multicur);
my @opts = split(/:/, $opt);
if (!$multi) {
$selstr = "";
foreach (@opts) {
if ($_ eq $hashref->{$key}) {
$selstr .= "TRUE ".$_." ";
} else {
$selstr .= "FALSE ".$_." ";
}
}
$nval = `zenity --title=\"$key\" --list --radiolist --text=\"$desc\" --column \"Check\" --column \"Option\" $selstr`;
} else {
$selstr = "";
@multicur = split(/ /, $hashref->{$key});
foreach my $tmp (@opts) {
$gotone = 0;
foreach (@multicur) {
if ($tmp eq $_) {
$selstr .= "TRUE ".$_." ";
$gotone = 1;
}
}
if (!$gotone) {
$selstr .= "FALSE ".$tmp." "
}
}
$nval = `zenity --title=\"$key\" --list --checklist --separator=\" \" --text=\"$desc\" --column \"Check\" --column \"Option\" $selstr`;
}
chomp($nval);
if ($nval) {
# Set to the new value.
$hashref->{$key} = $nval;
} else {
exit 0;
}
}
# write_hash(hash ref)
# Write out the hash to config file format.
sub write_hash {
my ($hashref, $fh, $tabs) = @_;
foreach my $key (sort(keys %$hashref)) {
if (ref($hashref->{$key}) eq 'HASH') {
print $fh $tabs.$key." {\n";
write_hash($hashref->{$key}, $fh, $tabs."\t");
print $fh $tabs."}\n";
} else {
print $fh $tabs.$key." = \"".$hashref->{$key}."\"\n";
}
}
}
# gen_menu(hash ref, location string)
# This will generate the menu.
sub gen_menu {
my ($hashref, $loc) = @_;
foreach my $key (sort(keys %$hashref)) {
if (ref($hashref->{$key}) eq 'HASH') {
print "Submenu = \" ".$key."\" {\n";
gen_menu($hashref->{$key}, $loc.$key."/");
print "}\n";
} else {
gen_entry($key, $hashref->{$key}, $loc);
}
}
}
# gen_entry(key, value, location)
sub gen_entry {
my ($key, $value, $loc) = @_;
# Boolean value
if ($value eq "True") {
print "Entry = \" ".$key."\" { Icon = \"check.png\"; Actions = \"Exec ".$path." --update ".$loc.$key."\" }\n";
} elsif ($value eq "False") {
print "Entry = \" ".$key."\" { Icon = \"uncheck.png\"; Actions = \"Exec ".$path." --update ".$loc.$key."\" }\n";
} else {
print "Entry = \" ".$key." [".$value."]\" { Actions = \"Exec ".$path." --update ".$loc.$key."\" }\n";
}
}
# hashify(file name)
# This should read a valid config file and store all of it into
# a logical hash table.
sub hashify {
# Filename parameter
my $file = shift;
# Replace ~ with home directory
$file =~ s/^~/$ENV{'HOME'}/;
my $comment = 0;
my ($key, $value, $hval, $val);
my @name_stack;
my @hash_stack;
push(@hash_stack, {});
# Open file for reading.
open(INFILE, $file) or return pop(@hash_stack);
# Read through file, line by line.
while (my $line = ) {
# Remove the new line character.
chomp($line);
# If we are currently within a comment, we need to check for
# the end comment symbols.
if ($comment) {
# If we hit the end comment characters, we are done
# commenting.
if ($line =~ s<.*\*/><>) { $comment = 0; }
# We are still commenting, so just skip the rest of this
# code.
else { next; }
}
# Remove /* bleh */ one liners.
$line =~ s<>;
# Remove /* bleh. This also means we have begun a multi-line
# comment, so set $comment to 1.
if ($line =~ s<>) { $comment = 1; next; }
# If we're not currently in a multi-line comment,
# remove // style comments.
if (!$comment) { $line =~ s<>; }
# If we have no line or this is a comment, skip the rest.
if (!$line || $comment) { next; }
# Is this a block?
while ($line =~ s/(\w+)\s*\{// ||
$line =~ s/\"(.+)\"\s*\{//) {
push(@name_stack, $1);
push(@hash_stack, {});
# Is this a variable?
# This, by the way, is needed for those one lined nested
# blocks and variables.
while ($line =~ s/^\s*(\w+)\s*=\s*\"(.*)\"// ||
$line =~ s/^\s*\"([\w\s]+)\"\s*=\s*\"(.*)\"//) {
$hash_stack[$#hash_stack]->{$1} = $2;
# Check if we have a bracket coming up, signifying
# the end of a block.
while ($line =~ s/^\s*\}//) {
$val = pop(@name_stack);
$hval = pop(@hash_stack);
# Add each key/value pair to the section/subsection.
while (($key, $value) = each(%$hval)) {
$hash_stack[$#hash_stack]->{$val}->{$key} = $value;
}
}
}
}
# Is this a variable?
if ( $line =~ s/^\s*(\w+)\s*=\s*\"(.*)\"// ||
$line =~ s/^\s*\"([\w\s]+)\"\s*=\s*\"(.*)\"//) {
$hash_stack[$#hash_stack]->{$1} = $2;
# Check if we have a bracket coming up, signifying
# the end of a block.
while ($line =~ s/^\s*\}//) {
$val = pop(@name_stack);
$hval = pop(@hash_stack);
# Add each key/value pair to the section/subsection.
while (($key, $value) = each(%$hval)) {
$hash_stack[$#hash_stack]->{$val}->{$key} = $value;
}
}
}
# End of block?
while ($line =~ s/^\s*\}//) {
$val = pop(@name_stack);
$hval = pop(@hash_stack);
# Add each key/value pair to the section/subsection.
while (($key, $value) = each(%$hval)) {
$hash_stack[$#hash_stack]->{$val}->{$key} = $value;
}
}
}
# Return fully assembled hash.
return pop(@hash_stack);
}
pekwm-0.4.4/contrib/lobo/README 0000664 0001750 0001750 00000003517 15126136025 011607 Official URL for these scripts is http://nxc.ath.cx/lobo/filez/pekwm/
****** pekwm scripts ******
***** pekwm autoprops generator *****
Required files:
* pekwm_autoprop.pl
If you upgrade to the latest version of pekwm, 0.1.9 and call this script
from a pekwm window menu, an autoproperty will be generated for you without
having to click the window with the crosshair.
This script uses xprop and xwininfo to generate a 'Property' block for the
pekwm autoproperties configuration file.
Usage:
a) If you would like to run this script manually from the console to produce
the block, simply run the script with no parameters:
./pekwm_autoprop.pl
Upon execution, you will be given a crosshair mouse cursor. This is simply
'xwininfo' prompting you to click your desired window.
b) To generate the 'Property' block and write it to your ~/.pekwm/
autoproperties file, run the script with the '-w' switch:
./pekwm_autoprop.pl -w
I like to add the following to my pekwm window menu:
Submenu = "Autoprops" {
Entry = "Save" { Actions = "Exec /home/matt/code/perl/pekwm_autoprop.pl -w" }
}
***** pekwm menu config *****
Required files:
* pekwm_menu_config.pl
* pekwm_menu_config.pl.vars
* check.png
* uncheck.png
Dependencies:
* Perl
* Zenity
This script parses the pekwm config file and creates a dynamic menu showing all
configuration options. When you click on an option the script will detect what
type of variable is being edited and will pop up a corresponding zenity dialog.
The config will then be rewritten and pekwm reloaded to reflect the change.
Usage:
Add the following to your pekwm menu:
Submenu = "Config" {
Entry { Actions = "Dynamic /home/matt/code/perl/pekwm_menu_config.pl --
genmenu" }
}
Also, place check.png and uncheck.png in your icons directory (usually
~/.pekwm/icons).
pekwm-0.4.4/contrib/lobo/pekwm_autoprop.pl 0000775 0001750 0001750 00000010166 15126136025 014341 #!/usr/bin/env perl
# pekwm_autoprop.pl
# Written by: Matt Hayes
#
# Generates and adds a Property block to ~/.pekwm/autoproperties.
#
# Add a menu entry or run this script manually. You will notice
# that upon running you get a crosshair cursor, use this to click on
# the window you want autoproperties generated for.
#
# Usage:
# Only generate: ./pekwm_autoprop.pl
# Generate and write: ./pekwm_autoprop.pl -w
use strict;
use warnings;
my ($_pekwm_frame_decor, $_net_wm_state, $_net_wm_desktop, $wm_class, $window_id,
$wm_window_role, $win_x, $win_y, $win_w, $win_h, $one, $two, @wininfo, $prop,
$info, $state, @states, $autoprops_file, $write, @props, $sticky);
# Get xwininfo.
@wininfo = get_xwininfo();
# Parse out window geometry info.
foreach $info (@wininfo) {
if ($info =~ /(.+):\s+([.\w]+)/) {
$one = $1, $two = $2;
if ($one =~ /xwininfo: Window id/) {
$window_id = $two;
} elsif ($one =~ /Absolute upper-left X/) {
$win_x = $two;
} elsif ($one =~ /Absolute upper-left Y/) {
$win_y = $two;
} elsif ($one =~ /Width/) {
$win_w = $two;
} elsif ($one =~ /Height/) {
$win_h = $two;
}
}
}
# Get xprops.
@props = get_xprops($window_id);
# Parse out the properties we need.
foreach $prop (@props) {
if ($prop =~ /(.+) = (.+)/) {
if ($1 eq "WM_WINDOW_ROLE(STRING)") {
$wm_window_role = $2;
} elsif ($1 eq "_PEKWM_FRAME_DECOR(CARDINAL)") {
$_pekwm_frame_decor = $2;
} elsif ($1 eq "_NET_WM_STATE(ATOM)") {
$_net_wm_state = $2;
} elsif ($1 eq "_NET_WM_DESKTOP(CARDINAL)") {
$_net_wm_desktop = $2;
} elsif ($1 eq "WM_CLASS(STRING)") {
$wm_class = $2;
}
} elsif ($prop =~ /(.+): (.+)/) {
$one = $1, $two = $2;
if ($one =~ /window id \# of group leader/) {
$window_id = $two;
}
}
}
$wm_class =~ /\"(.+)\", \"(.+)\"/;
# Assemble write string.
$write = "\n// Auto-generated autoproperty:\n".
"// ".$1." ".$2."\n";
$write .= "Property = \"^".$1.",^".$2."\" {\n".
"\tApplyOn = \"Start New Reload\"\n".
"\tClientGeometry = \"".$win_w."x".$win_h."+".$win_x."+".$win_y."\"\n";
# Set decor options
if (defined($_pekwm_frame_decor)) {
# Titlebar false
if ($_pekwm_frame_decor == 4 || $_pekwm_frame_decor == 0) {
$write .= "\tTitlebar = \"False\"\n";
}
# Border false
if ($_pekwm_frame_decor == 2 || $_pekwm_frame_decor == 0) {
$write .= "\tBorder = \"False\"\n";
}
}
# Add state booleans.
if ($_net_wm_state) {
@states = split(/, /, $_net_wm_state);
foreach $state (@states) {
if ($state eq "_NET_WM_STATE_STICKY") {
$write .= "\tSticky = \"True\"\n";
$sticky = 1;
} elsif ($state eq "_NET_WM_STATE_SHADED") {
$write .= "\tShaded = \"True\"\n";
}
}
}
# Set workspace if this window isn't sticky.
if (!$sticky) {
$write .= "\tWorkspace = \"".($_net_wm_desktop + 1)."\"\n";
}
# Set role
if ($wm_window_role) {
$write .= "\tRole = ".$wm_window_role."\n";
}
# End of section.
$write .= "}\n";
# Write to autoproperties or to console.
if ($ARGV[0] && $ARGV[0] eq "-w") {
$autoprops_file = get_autoprops_file();
$autoprops_file =~ s/~/$ENV{'HOME'}/;
open(OUTFILE, ">>".$autoprops_file) or die "Could not open ~/.pekwm/autoproperties for writing!\n";
print OUTFILE $write;
close(OUTFILE);
print "Successfully wrote autoproperty.\n";
} else {
print $write;
}
# Find the autoprops file.
sub get_autoprops_file {
open(OUTFILE, "<".$ENV{'PEKWM_CONFIG_FILE'}) or die "Could not open pekwm config for reading!\n";
my $in_sec = 0;
while () {
if (!$in_sec && $_ =~ /Files\s+\{/) {
$in_sec = 1;
} elsif ($in_sec) {
if ($_ =~ /AutoProps\s+=\s+\"(.+)\"/) {
close(OUTFILE);
return $1;
}
}
}
close(OUTFILE);
if ($ENV[PEKWM_CONFIG_PATH]) {
return $ENV{PEKWM_CONFIG_PATH}."/autoproperties";
}
return $ENV{HOME}."/.pekwm/autoproperties";
}
# Create an xprops array.
sub get_xprops {
my $id = shift;
my $xprop = `xprop -id $id`;
my @xprops = split(/\n/, $xprop);
return @xprops;
}
# Create an xwininfo array.
sub get_xwininfo {
my $xwininfo;
if ($ENV{CLIENT_WINDOW}) {
$xwininfo = `xwininfo -id $ENV{CLIENT_WINDOW}`;
} else {
$xwininfo = `xwininfo`;
}
my @xwininfos = split(/\n/, $xwininfo);
return @xwininfos;
}
pekwm-0.4.4/contrib/lobo/uncheck.png 0000664 0001750 0001750 00000000304 15126136025 013044 ‰PNG
IHDR
PXê sRGB ®Î é pHYs šœ tIMEØ 3¿ñ3ò tEXtComment Created with GIMPW 1IDATÓc`À |}}±ÊmÞ¼™ÂÚ´išœŸŸ ~ÃRšÙ$ þPw7à IEND®B`‚ pekwm-0.4.4/contrib/CMakeLists.txt 0000664 0001750 0001750 00000000075 15126136025 012530 cmake_minimum_required(VERSION 3.10)
add_subdirectory(lobo)
pekwm-0.4.4/contrib/Makefile.am 0000664 0001750 0001750 00000000344 15126136025 012023 EXTRA_DIST = CMakeLists.txt \
lobo/CMakeLists.txt \
lobo/README \
lobo/check.png \
lobo/pekwm_autoprop.pl \
lobo/pekwm_menu_config.pl \
lobo/pekwm_menu_config.pl.vars \
lobo/uncheck.png
pekwm-0.4.4/contrib/Makefile.in 0000664 0001750 0001750 00000031461 15164641453 012050 # Makefile.in generated by automake 1.17 from Makefile.am.
# @configure_input@
# Copyright (C) 1994-2024 Free Software Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.
@SET_MAKE@
VPATH = @srcdir@
am__is_gnu_make = { \
if test -z '$(MAKELEVEL)'; then \
false; \
elif test -n '$(MAKE_HOST)'; then \
true; \
elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
true; \
else \
false; \
fi; \
}
am__make_running_with_option = \
case $${target_option-} in \
?) ;; \
*) echo "am__make_running_with_option: internal error: invalid" \
"target option '$${target_option-}' specified" >&2; \
exit 1;; \
esac; \
has_opt=no; \
sane_makeflags=$$MAKEFLAGS; \
if $(am__is_gnu_make); then \
sane_makeflags=$$MFLAGS; \
else \
case $$MAKEFLAGS in \
*\\[\ \ ]*) \
bs=\\; \
sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
| sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \
esac; \
fi; \
skip_next=no; \
strip_trailopt () \
{ \
flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
}; \
for flg in $$sane_makeflags; do \
test $$skip_next = yes && { skip_next=no; continue; }; \
case $$flg in \
*=*|--*) continue;; \
-*I) strip_trailopt 'I'; skip_next=yes;; \
-*I?*) strip_trailopt 'I';; \
-*O) strip_trailopt 'O'; skip_next=yes;; \
-*O?*) strip_trailopt 'O';; \
-*l) strip_trailopt 'l'; skip_next=yes;; \
-*l?*) strip_trailopt 'l';; \
-[dEDm]) skip_next=yes;; \
-[JT]) skip_next=yes;; \
esac; \
case $$flg in \
*$$target_option*) has_opt=yes; break;; \
esac; \
done; \
test $$has_opt = yes
am__make_dryrun = (target_option=n; $(am__make_running_with_option))
am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
am__rm_f = rm -f $(am__rm_f_notfound)
am__rm_rf = rm -rf $(am__rm_f_notfound)
pkgdatadir = $(datadir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
pkglibexecdir = $(libexecdir)/@PACKAGE@
am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
install_sh_DATA = $(install_sh) -c -m 644
install_sh_PROGRAM = $(install_sh) -c
install_sh_SCRIPT = $(install_sh) -c
INSTALL_HEADER = $(INSTALL_DATA)
transform = $(program_transform_name)
NORMAL_INSTALL = :
PRE_INSTALL = :
POST_INSTALL = :
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
build_triplet = @build@
host_triplet = @host@
target_triplet = @target@
subdir = contrib
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
DIST_COMMON = $(srcdir)/Makefile.am $(am__DIST_COMMON)
mkinstalldirs = $(install_sh) -d
CONFIG_HEADER = $(top_builddir)/config.h
CONFIG_CLEAN_FILES =
CONFIG_CLEAN_VPATH_FILES =
AM_V_P = $(am__v_P_@AM_V@)
am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
am__v_P_0 = false
am__v_P_1 = :
AM_V_GEN = $(am__v_GEN_@AM_V@)
am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
am__v_GEN_0 = @echo " GEN " $@;
am__v_GEN_1 =
AM_V_at = $(am__v_at_@AM_V@)
am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
am__v_at_0 = @
am__v_at_1 =
SOURCES =
DIST_SOURCES =
am__can_run_installinfo = \
case $$AM_UPDATE_INFO_DIR in \
n|no|NO) false;; \
*) (install-info --version) >/dev/null 2>&1;; \
esac
am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
am__DIST_COMMON = $(srcdir)/Makefile.in
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
ACLOCAL = @ACLOCAL@
AMTAR = @AMTAR@
AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
AUTOCONF = @AUTOCONF@
AUTOHEADER = @AUTOHEADER@
AUTOMAKE = @AUTOMAKE@
AWK = @AWK@
CC = @CC@
CCDEPMODE = @CCDEPMODE@
CFLAGS = @CFLAGS@
CPP = @CPP@
CPPFLAGS = @CPPFLAGS@
CSCOPE = @CSCOPE@
CTAGS = @CTAGS@
CXX = @CXX@
CXXDEPMODE = @CXXDEPMODE@
CXXFLAGS = @CXXFLAGS@
CYGPATH_W = @CYGPATH_W@
DEFS = @DEFS@
DEPDIR = @DEPDIR@
ECHO_C = @ECHO_C@
ECHO_N = @ECHO_N@
ECHO_T = @ECHO_T@
ETAGS = @ETAGS@
EXEEXT = @EXEEXT@
GREP = @GREP@
INSTALL = @INSTALL@
INSTALL_DATA = @INSTALL_DATA@
INSTALL_PROGRAM = @INSTALL_PROGRAM@
INSTALL_SCRIPT = @INSTALL_SCRIPT@
INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
LDFLAGS = @LDFLAGS@
LIBOBJS = @LIBOBJS@
LIBS = @LIBS@
LIB_CFLAGS = @LIB_CFLAGS@
LIB_LIBS = @LIB_LIBS@
LTLIBOBJS = @LTLIBOBJS@
MAKEINFO = @MAKEINFO@
MKDIR_P = @MKDIR_P@
OBJEXT = @OBJEXT@
PACKAGE = @PACKAGE@
PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
PACKAGE_NAME = @PACKAGE_NAME@
PACKAGE_STRING = @PACKAGE_STRING@
PACKAGE_TARNAME = @PACKAGE_TARNAME@
PACKAGE_URL = @PACKAGE_URL@
PACKAGE_VERSION = @PACKAGE_VERSION@
PATH_SEPARATOR = @PATH_SEPARATOR@
PEKWM_FEATURES = @PEKWM_FEATURES@
PEKWM_SH = @PEKWM_SH@
PEKWM_THEMES = @PEKWM_THEMES@
PKG_CONFIG = @PKG_CONFIG@
PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@
PKG_CONFIG_PATH = @PKG_CONFIG_PATH@
RANLIB = @RANLIB@
SED = @SED@
SET_MAKE = @SET_MAKE@
SHELL = @SHELL@
STRIP = @STRIP@
TK_CFLAGS = @TK_CFLAGS@
TK_LIBS = @TK_LIBS@
VERSION = @VERSION@
XMKMF = @XMKMF@
X_CFLAGS = @X_CFLAGS@
X_EXTRA_LIBS = @X_EXTRA_LIBS@
X_LIBS = @X_LIBS@
X_PRE_LIBS = @X_PRE_LIBS@
abs_builddir = @abs_builddir@
abs_srcdir = @abs_srcdir@
abs_top_builddir = @abs_top_builddir@
abs_top_srcdir = @abs_top_srcdir@
ac_ct_CC = @ac_ct_CC@
ac_ct_CXX = @ac_ct_CXX@
am__include = @am__include@
am__leading_dot = @am__leading_dot@
am__quote = @am__quote@
am__rm_f_notfound = @am__rm_f_notfound@
am__tar = @am__tar@
am__untar = @am__untar@
am__xargs_n = @am__xargs_n@
bindir = @bindir@
build = @build@
build_alias = @build_alias@
build_cpu = @build_cpu@
build_os = @build_os@
build_vendor = @build_vendor@
builddir = @builddir@
datadir = @datadir@
datarootdir = @datarootdir@
docdir = @docdir@
dvidir = @dvidir@
exec_prefix = @exec_prefix@
host = @host@
host_alias = @host_alias@
host_cpu = @host_cpu@
host_os = @host_os@
host_vendor = @host_vendor@
htmldir = @htmldir@
includedir = @includedir@
infodir = @infodir@
install_sh = @install_sh@
libcurl_CFLAGS = @libcurl_CFLAGS@
libcurl_LIBS = @libcurl_LIBS@
libdir = @libdir@
libexecdir = @libexecdir@
libjpeg_CFLAGS = @libjpeg_CFLAGS@
libjpeg_LIBS = @libjpeg_LIBS@
libpng_CFLAGS = @libpng_CFLAGS@
libpng_LIBS = @libpng_LIBS@
libudev_CFLAGS = @libudev_CFLAGS@
libudev_LIBS = @libudev_LIBS@
localedir = @localedir@
localstatedir = @localstatedir@
mandir = @mandir@
mkdir_p = @mkdir_p@
oldincludedir = @oldincludedir@
pango_CFLAGS = @pango_CFLAGS@
pango_LIBS = @pango_LIBS@
pangocairo_CFLAGS = @pangocairo_CFLAGS@
pangocairo_LIBS = @pangocairo_LIBS@
pangoxft_CFLAGS = @pangoxft_CFLAGS@
pangoxft_LIBS = @pangoxft_LIBS@
pdfdir = @pdfdir@
prefix = @prefix@
program_transform_name = @program_transform_name@
psdir = @psdir@
runstatedir = @runstatedir@
sbindir = @sbindir@
sharedstatedir = @sharedstatedir@
srcdir = @srcdir@
sysconfdir = @sysconfdir@
target = @target@
target_alias = @target_alias@
target_cpu = @target_cpu@
target_os = @target_os@
target_vendor = @target_vendor@
top_build_prefix = @top_build_prefix@
top_builddir = @top_builddir@
top_srcdir = @top_srcdir@
xext_CFLAGS = @xext_CFLAGS@
xext_LIBS = @xext_LIBS@
xft_CFLAGS = @xft_CFLAGS@
xft_LIBS = @xft_LIBS@
xinerama_CFLAGS = @xinerama_CFLAGS@
xinerama_LIBS = @xinerama_LIBS@
xpm_CFLAGS = @xpm_CFLAGS@
xpm_LIBS = @xpm_LIBS@
xrandr_CFLAGS = @xrandr_CFLAGS@
xrandr_LIBS = @xrandr_LIBS@
EXTRA_DIST = CMakeLists.txt \
lobo/CMakeLists.txt \
lobo/README \
lobo/check.png \
lobo/pekwm_autoprop.pl \
lobo/pekwm_menu_config.pl \
lobo/pekwm_menu_config.pl.vars \
lobo/uncheck.png
all: all-am
.SUFFIXES:
$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps)
@for dep in $?; do \
case '$(am__configure_deps)' in \
*$$dep*) \
( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
&& { if test -f $@; then exit 0; else break; fi; }; \
exit 1;; \
esac; \
done; \
echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign contrib/Makefile'; \
$(am__cd) $(top_srcdir) && \
$(AUTOMAKE) --foreign contrib/Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
@case '$?' in \
*config.status*) \
cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
*) \
echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__maybe_remake_depfiles)'; \
cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__maybe_remake_depfiles);; \
esac;
$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(top_srcdir)/configure: $(am__configure_deps)
cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(ACLOCAL_M4): $(am__aclocal_m4_deps)
cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(am__aclocal_m4_deps):
tags TAGS:
ctags CTAGS:
cscope cscopelist:
distdir: $(BUILT_SOURCES)
$(MAKE) $(AM_MAKEFLAGS) distdir-am
distdir-am: $(DISTFILES)
@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
list='$(DISTFILES)'; \
dist_files=`for file in $$list; do echo $$file; done | \
sed -e "s|^$$srcdirstrip/||;t" \
-e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
case $$dist_files in \
*/*) $(MKDIR_P) `echo "$$dist_files" | \
sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
sort -u` ;; \
esac; \
for file in $$dist_files; do \
if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
if test -d $$d/$$file; then \
dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
if test -d "$(distdir)/$$file"; then \
find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
fi; \
if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
fi; \
cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
else \
test -f "$(distdir)/$$file" \
|| cp -p $$d/$$file "$(distdir)/$$file" \
|| exit 1; \
fi; \
done
check-am: all-am
check: check-am
all-am: Makefile
installdirs:
install: install-am
install-exec: install-exec-am
install-data: install-data-am
uninstall: uninstall-am
install-am: all-am
@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
installcheck: installcheck-am
install-strip:
if test -z '$(STRIP)'; then \
$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
install; \
else \
$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
"INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
fi
mostlyclean-generic:
clean-generic:
distclean-generic:
-$(am__rm_f) $(CONFIG_CLEAN_FILES)
-test . = "$(srcdir)" || $(am__rm_f) $(CONFIG_CLEAN_VPATH_FILES)
maintainer-clean-generic:
@echo "This command is intended for maintainers to use"
@echo "it deletes files that may require special tools to rebuild."
clean: clean-am
clean-am: clean-generic mostlyclean-am
distclean: distclean-am
-rm -f Makefile
distclean-am: clean-am distclean-generic
dvi: dvi-am
dvi-am:
html: html-am
html-am:
info: info-am
info-am:
install-data-am:
install-dvi: install-dvi-am
install-dvi-am:
install-exec-am:
install-html: install-html-am
install-html-am:
install-info: install-info-am
install-info-am:
install-man:
install-pdf: install-pdf-am
install-pdf-am:
install-ps: install-ps-am
install-ps-am:
installcheck-am:
maintainer-clean: maintainer-clean-am
-rm -f Makefile
maintainer-clean-am: distclean-am maintainer-clean-generic
mostlyclean: mostlyclean-am
mostlyclean-am: mostlyclean-generic
pdf: pdf-am
pdf-am:
ps: ps-am
ps-am:
uninstall-am:
.MAKE: install-am install-strip
.PHONY: all all-am check check-am clean clean-generic cscopelist-am \
ctags-am distclean distclean-generic distdir dvi dvi-am html \
html-am info info-am install install-am install-data \
install-data-am install-dvi install-dvi-am install-exec \
install-exec-am install-html install-html-am install-info \
install-info-am install-man install-pdf install-pdf-am \
install-ps install-ps-am install-strip installcheck \
installcheck-am installdirs maintainer-clean \
maintainer-clean-generic mostlyclean mostlyclean-generic pdf \
pdf-am ps ps-am tags-am uninstall uninstall-am
.PRECIOUS: Makefile
# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT:
# Tell GNU make to disable its built-in pattern rules.
%:: %,v
%:: RCS/%,v
%:: RCS/%
%:: s.%
%:: SCCS/s.%
pekwm-0.4.4/Makefile.am 0000664 0001750 0001750 00000000201 15126136025 010353 SUBDIRS = src data dev doc contrib
if ENABLE_TESTS
SUBDIRS += test
endif
EXTRA_DIST = CMake/config.h.in CMakeLists.txt LICENSE
pekwm-0.4.4/src/ 0000775 0001750 0001750 00000000000 15164641623 007204 5 pekwm-0.4.4/src/dialog/ 0000775 0001750 0001750 00000000000 15164641623 010443 5 pekwm-0.4.4/src/dialog/CMakeLists.txt 0000664 0001750 0001750 00000000427 15126136025 013117 cmake_minimum_required(VERSION 3.10)
add_executable(pekwm_dialog pekwm_dialog.cc ../pekwm_env.cc)
target_include_directories(pekwm_dialog PUBLIC ${common_INCLUDE_DIRS})
target_link_libraries(pekwm_dialog tk lib ${common_LIBRARIES})
install(TARGETS pekwm_dialog DESTINATION bin)
pekwm-0.4.4/src/dialog/pekwm_dialog.hh 0000664 0001750 0001750 00000005237 15126136025 013346 //
// pekwm_dialog.hh for pekwm
// Copyright (C) 2023-2025 Claes Nästén
//
// This program is licensed under the GNU GPL.
// See the LICENSE file for more information.
//
#ifndef _PEKWM_DIALOG_HH_
#define _PEKWM_DIALOG_HH_
#include
#include "../tk/PImage.hh"
#include "../tk/PPixmapSurface.hh"
#include "../tk/Theme.hh"
#include "../tk/TkWidget.hh"
#include "../tk/X11App.hh"
class PekwmDialogConfig {
public:
PekwmDialogConfig(const std::string& title, PImage* image,
const std::string& message,
const std::vector& options)
: _title(title.empty() ? "pekwm_dialog" : title),
_image(image),
_message(message),
_options(options)
{
if (_options.empty()) {
_options.push_back("Ok");
}
}
const std::string& getTitle() const { return _title; }
PImage* getImage() const { return _image; }
const std::string& getMessage() const { return _message; }
const std::vector& getOptions() const { return _options; }
private:
std::string _title;
PImage* _image;
std::string _message;
std::vector _options;
};
/**
* Dialog
*
* --------------------------------------------
* | TITLE |
* --------------------------------------------
* | Image if any is displayed here |
* | |
* | |
* | |
* --------------------------------------------
* | Message text goes here |
* | |
* --------------------------------------------
* | [Option1] [Option2] |
* --------------------------------------------
*
*/
class PekwmDialog : public X11App {
public:
PekwmDialog(const std::string &theme_dir,
const std::string &theme_variant,
const Geometry &gm, int gm_mask, int decorations,
bool raise, const PekwmDialogConfig& config);
virtual ~PekwmDialog();
static PekwmDialog *instance() { return _instance; }
virtual void handleEvent(XEvent *ev);
virtual void resize(uint width, uint height);
void show(void);
void render();
void setState(Window window, ButtonState state);
void click(Window window);
protected:
void initWidgets(const PekwmDialogConfig& config);
void placeWidgets(void);
private:
virtual void themeChanged(const std::string& name,
const std::string& variant, float scale);
static void stopDialog(int retcode);
Geometry _initial_gm;
Theme _theme;
Theme::DialogData* _data;
bool _raise;
PPixmapSurface _background;
std::vector _widgets;
static PekwmDialog *_instance;
};
#endif // _PEKWM_DIALOG_HH_
pekwm-0.4.4/src/dialog/Makefile.am 0000664 0001750 0001750 00000000422 15126136025 012406 bin_PROGRAMS = pekwm_dialog
pekwm_dialog_SOURCES = pekwm_dialog.cc pekwm_dialog.hh ../pekwm_env.cc
pekwm_dialog_CXXFLAGS = $(LIB_CFLAGS) $(TK_CFLAGS) -I../lib
pekwm_dialog_LDADD = ../tk/libpekwm_tk.a ../lib/libpekwm_lib.a $(LIB_LIBS) $(TK_LIBS)
EXTRA_DIST = CMakeLists.txt
pekwm-0.4.4/src/dialog/Makefile.in 0000664 0001750 0001750 00000061346 15164641454 012444 # Makefile.in generated by automake 1.17 from Makefile.am.
# @configure_input@
# Copyright (C) 1994-2024 Free Software Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.
@SET_MAKE@
VPATH = @srcdir@
am__is_gnu_make = { \
if test -z '$(MAKELEVEL)'; then \
false; \
elif test -n '$(MAKE_HOST)'; then \
true; \
elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
true; \
else \
false; \
fi; \
}
am__make_running_with_option = \
case $${target_option-} in \
?) ;; \
*) echo "am__make_running_with_option: internal error: invalid" \
"target option '$${target_option-}' specified" >&2; \
exit 1;; \
esac; \
has_opt=no; \
sane_makeflags=$$MAKEFLAGS; \
if $(am__is_gnu_make); then \
sane_makeflags=$$MFLAGS; \
else \
case $$MAKEFLAGS in \
*\\[\ \ ]*) \
bs=\\; \
sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
| sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \
esac; \
fi; \
skip_next=no; \
strip_trailopt () \
{ \
flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
}; \
for flg in $$sane_makeflags; do \
test $$skip_next = yes && { skip_next=no; continue; }; \
case $$flg in \
*=*|--*) continue;; \
-*I) strip_trailopt 'I'; skip_next=yes;; \
-*I?*) strip_trailopt 'I';; \
-*O) strip_trailopt 'O'; skip_next=yes;; \
-*O?*) strip_trailopt 'O';; \
-*l) strip_trailopt 'l'; skip_next=yes;; \
-*l?*) strip_trailopt 'l';; \
-[dEDm]) skip_next=yes;; \
-[JT]) skip_next=yes;; \
esac; \
case $$flg in \
*$$target_option*) has_opt=yes; break;; \
esac; \
done; \
test $$has_opt = yes
am__make_dryrun = (target_option=n; $(am__make_running_with_option))
am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
am__rm_f = rm -f $(am__rm_f_notfound)
am__rm_rf = rm -rf $(am__rm_f_notfound)
pkgdatadir = $(datadir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
pkglibexecdir = $(libexecdir)/@PACKAGE@
am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
install_sh_DATA = $(install_sh) -c -m 644
install_sh_PROGRAM = $(install_sh) -c
install_sh_SCRIPT = $(install_sh) -c
INSTALL_HEADER = $(INSTALL_DATA)
transform = $(program_transform_name)
NORMAL_INSTALL = :
PRE_INSTALL = :
POST_INSTALL = :
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
build_triplet = @build@
host_triplet = @host@
target_triplet = @target@
bin_PROGRAMS = pekwm_dialog$(EXEEXT)
subdir = src/dialog
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
DIST_COMMON = $(srcdir)/Makefile.am $(am__DIST_COMMON)
mkinstalldirs = $(install_sh) -d
CONFIG_HEADER = $(top_builddir)/config.h
CONFIG_CLEAN_FILES =
CONFIG_CLEAN_VPATH_FILES =
am__installdirs = "$(DESTDIR)$(bindir)"
PROGRAMS = $(bin_PROGRAMS)
am__dirstamp = $(am__leading_dot)dirstamp
am_pekwm_dialog_OBJECTS = pekwm_dialog-pekwm_dialog.$(OBJEXT) \
../pekwm_dialog-pekwm_env.$(OBJEXT)
pekwm_dialog_OBJECTS = $(am_pekwm_dialog_OBJECTS)
am__DEPENDENCIES_1 =
pekwm_dialog_DEPENDENCIES = ../tk/libpekwm_tk.a ../lib/libpekwm_lib.a \
$(am__DEPENDENCIES_1) $(am__DEPENDENCIES_1)
pekwm_dialog_LINK = $(CXXLD) $(pekwm_dialog_CXXFLAGS) $(CXXFLAGS) \
$(AM_LDFLAGS) $(LDFLAGS) -o $@
AM_V_P = $(am__v_P_@AM_V@)
am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
am__v_P_0 = false
am__v_P_1 = :
AM_V_GEN = $(am__v_GEN_@AM_V@)
am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
am__v_GEN_0 = @echo " GEN " $@;
am__v_GEN_1 =
AM_V_at = $(am__v_at_@AM_V@)
am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
am__v_at_0 = @
am__v_at_1 =
DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)
depcomp = $(SHELL) $(top_srcdir)/depcomp
am__maybe_remake_depfiles = depfiles
am__depfiles_remade = ../$(DEPDIR)/pekwm_dialog-pekwm_env.Po \
./$(DEPDIR)/pekwm_dialog-pekwm_dialog.Po
am__mv = mv -f
AM_V_lt = $(am__v_lt_@AM_V@)
am__v_lt_ = $(am__v_lt_@AM_DEFAULT_V@)
am__v_lt_0 = --silent
am__v_lt_1 =
CXXCOMPILE = $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \
$(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS)
AM_V_CXX = $(am__v_CXX_@AM_V@)
am__v_CXX_ = $(am__v_CXX_@AM_DEFAULT_V@)
am__v_CXX_0 = @echo " CXX " $@;
am__v_CXX_1 =
CXXLD = $(CXX)
CXXLINK = $(CXXLD) $(AM_CXXFLAGS) $(CXXFLAGS) $(AM_LDFLAGS) $(LDFLAGS) \
-o $@
AM_V_CXXLD = $(am__v_CXXLD_@AM_V@)
am__v_CXXLD_ = $(am__v_CXXLD_@AM_DEFAULT_V@)
am__v_CXXLD_0 = @echo " CXXLD " $@;
am__v_CXXLD_1 =
COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
AM_V_CC = $(am__v_CC_@AM_V@)
am__v_CC_ = $(am__v_CC_@AM_DEFAULT_V@)
am__v_CC_0 = @echo " CC " $@;
am__v_CC_1 =
CCLD = $(CC)
LINK = $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) $(LDFLAGS) -o $@
AM_V_CCLD = $(am__v_CCLD_@AM_V@)
am__v_CCLD_ = $(am__v_CCLD_@AM_DEFAULT_V@)
am__v_CCLD_0 = @echo " CCLD " $@;
am__v_CCLD_1 =
SOURCES = $(pekwm_dialog_SOURCES)
DIST_SOURCES = $(pekwm_dialog_SOURCES)
am__can_run_installinfo = \
case $$AM_UPDATE_INFO_DIR in \
n|no|NO) false;; \
*) (install-info --version) >/dev/null 2>&1;; \
esac
am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
# Read a list of newline-separated strings from the standard input,
# and print each of them once, without duplicates. Input order is
# *not* preserved.
am__uniquify_input = $(AWK) '\
BEGIN { nonempty = 0; } \
{ items[$$0] = 1; nonempty = 1; } \
END { if (nonempty) { for (i in items) print i; }; } \
'
# Make sure the list of sources is unique. This is necessary because,
# e.g., the same source file might be shared among _SOURCES variables
# for different programs/libraries.
am__define_uniq_tagged_files = \
list='$(am__tagged_files)'; \
unique=`for i in $$list; do \
if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
done | $(am__uniquify_input)`
am__DIST_COMMON = $(srcdir)/Makefile.in $(top_srcdir)/depcomp
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
ACLOCAL = @ACLOCAL@
AMTAR = @AMTAR@
AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
AUTOCONF = @AUTOCONF@
AUTOHEADER = @AUTOHEADER@
AUTOMAKE = @AUTOMAKE@
AWK = @AWK@
CC = @CC@
CCDEPMODE = @CCDEPMODE@
CFLAGS = @CFLAGS@
CPP = @CPP@
CPPFLAGS = @CPPFLAGS@
CSCOPE = @CSCOPE@
CTAGS = @CTAGS@
CXX = @CXX@
CXXDEPMODE = @CXXDEPMODE@
CXXFLAGS = @CXXFLAGS@
CYGPATH_W = @CYGPATH_W@
DEFS = @DEFS@
DEPDIR = @DEPDIR@
ECHO_C = @ECHO_C@
ECHO_N = @ECHO_N@
ECHO_T = @ECHO_T@
ETAGS = @ETAGS@
EXEEXT = @EXEEXT@
GREP = @GREP@
INSTALL = @INSTALL@
INSTALL_DATA = @INSTALL_DATA@
INSTALL_PROGRAM = @INSTALL_PROGRAM@
INSTALL_SCRIPT = @INSTALL_SCRIPT@
INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
LDFLAGS = @LDFLAGS@
LIBOBJS = @LIBOBJS@
LIBS = @LIBS@
LIB_CFLAGS = @LIB_CFLAGS@
LIB_LIBS = @LIB_LIBS@
LTLIBOBJS = @LTLIBOBJS@
MAKEINFO = @MAKEINFO@
MKDIR_P = @MKDIR_P@
OBJEXT = @OBJEXT@
PACKAGE = @PACKAGE@
PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
PACKAGE_NAME = @PACKAGE_NAME@
PACKAGE_STRING = @PACKAGE_STRING@
PACKAGE_TARNAME = @PACKAGE_TARNAME@
PACKAGE_URL = @PACKAGE_URL@
PACKAGE_VERSION = @PACKAGE_VERSION@
PATH_SEPARATOR = @PATH_SEPARATOR@
PEKWM_FEATURES = @PEKWM_FEATURES@
PEKWM_SH = @PEKWM_SH@
PEKWM_THEMES = @PEKWM_THEMES@
PKG_CONFIG = @PKG_CONFIG@
PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@
PKG_CONFIG_PATH = @PKG_CONFIG_PATH@
RANLIB = @RANLIB@
SED = @SED@
SET_MAKE = @SET_MAKE@
SHELL = @SHELL@
STRIP = @STRIP@
TK_CFLAGS = @TK_CFLAGS@
TK_LIBS = @TK_LIBS@
VERSION = @VERSION@
XMKMF = @XMKMF@
X_CFLAGS = @X_CFLAGS@
X_EXTRA_LIBS = @X_EXTRA_LIBS@
X_LIBS = @X_LIBS@
X_PRE_LIBS = @X_PRE_LIBS@
abs_builddir = @abs_builddir@
abs_srcdir = @abs_srcdir@
abs_top_builddir = @abs_top_builddir@
abs_top_srcdir = @abs_top_srcdir@
ac_ct_CC = @ac_ct_CC@
ac_ct_CXX = @ac_ct_CXX@
am__include = @am__include@
am__leading_dot = @am__leading_dot@
am__quote = @am__quote@
am__rm_f_notfound = @am__rm_f_notfound@
am__tar = @am__tar@
am__untar = @am__untar@
am__xargs_n = @am__xargs_n@
bindir = @bindir@
build = @build@
build_alias = @build_alias@
build_cpu = @build_cpu@
build_os = @build_os@
build_vendor = @build_vendor@
builddir = @builddir@
datadir = @datadir@
datarootdir = @datarootdir@
docdir = @docdir@
dvidir = @dvidir@
exec_prefix = @exec_prefix@
host = @host@
host_alias = @host_alias@
host_cpu = @host_cpu@
host_os = @host_os@
host_vendor = @host_vendor@
htmldir = @htmldir@
includedir = @includedir@
infodir = @infodir@
install_sh = @install_sh@
libcurl_CFLAGS = @libcurl_CFLAGS@
libcurl_LIBS = @libcurl_LIBS@
libdir = @libdir@
libexecdir = @libexecdir@
libjpeg_CFLAGS = @libjpeg_CFLAGS@
libjpeg_LIBS = @libjpeg_LIBS@
libpng_CFLAGS = @libpng_CFLAGS@
libpng_LIBS = @libpng_LIBS@
libudev_CFLAGS = @libudev_CFLAGS@
libudev_LIBS = @libudev_LIBS@
localedir = @localedir@
localstatedir = @localstatedir@
mandir = @mandir@
mkdir_p = @mkdir_p@
oldincludedir = @oldincludedir@
pango_CFLAGS = @pango_CFLAGS@
pango_LIBS = @pango_LIBS@
pangocairo_CFLAGS = @pangocairo_CFLAGS@
pangocairo_LIBS = @pangocairo_LIBS@
pangoxft_CFLAGS = @pangoxft_CFLAGS@
pangoxft_LIBS = @pangoxft_LIBS@
pdfdir = @pdfdir@
prefix = @prefix@
program_transform_name = @program_transform_name@
psdir = @psdir@
runstatedir = @runstatedir@
sbindir = @sbindir@
sharedstatedir = @sharedstatedir@
srcdir = @srcdir@
sysconfdir = @sysconfdir@
target = @target@
target_alias = @target_alias@
target_cpu = @target_cpu@
target_os = @target_os@
target_vendor = @target_vendor@
top_build_prefix = @top_build_prefix@
top_builddir = @top_builddir@
top_srcdir = @top_srcdir@
xext_CFLAGS = @xext_CFLAGS@
xext_LIBS = @xext_LIBS@
xft_CFLAGS = @xft_CFLAGS@
xft_LIBS = @xft_LIBS@
xinerama_CFLAGS = @xinerama_CFLAGS@
xinerama_LIBS = @xinerama_LIBS@
xpm_CFLAGS = @xpm_CFLAGS@
xpm_LIBS = @xpm_LIBS@
xrandr_CFLAGS = @xrandr_CFLAGS@
xrandr_LIBS = @xrandr_LIBS@
pekwm_dialog_SOURCES = pekwm_dialog.cc pekwm_dialog.hh ../pekwm_env.cc
pekwm_dialog_CXXFLAGS = $(LIB_CFLAGS) $(TK_CFLAGS) -I../lib
pekwm_dialog_LDADD = ../tk/libpekwm_tk.a ../lib/libpekwm_lib.a $(LIB_LIBS) $(TK_LIBS)
EXTRA_DIST = CMakeLists.txt
all: all-am
.SUFFIXES:
.SUFFIXES: .cc .o .obj
$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps)
@for dep in $?; do \
case '$(am__configure_deps)' in \
*$$dep*) \
( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
&& { if test -f $@; then exit 0; else break; fi; }; \
exit 1;; \
esac; \
done; \
echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign src/dialog/Makefile'; \
$(am__cd) $(top_srcdir) && \
$(AUTOMAKE) --foreign src/dialog/Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
@case '$?' in \
*config.status*) \
cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
*) \
echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__maybe_remake_depfiles)'; \
cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__maybe_remake_depfiles);; \
esac;
$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(top_srcdir)/configure: $(am__configure_deps)
cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(ACLOCAL_M4): $(am__aclocal_m4_deps)
cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(am__aclocal_m4_deps):
install-binPROGRAMS: $(bin_PROGRAMS)
@$(NORMAL_INSTALL)
@list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \
if test -n "$$list"; then \
echo " $(MKDIR_P) '$(DESTDIR)$(bindir)'"; \
$(MKDIR_P) "$(DESTDIR)$(bindir)" || exit 1; \
fi; \
for p in $$list; do echo "$$p $$p"; done | \
sed 's/$(EXEEXT)$$//' | \
while read p p1; do if test -f $$p \
; then echo "$$p"; echo "$$p"; else :; fi; \
done | \
sed -e 'p;s,.*/,,;n;h' \
-e 's|.*|.|' \
-e 'p;x;s,.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/' | \
sed 'N;N;N;s,\n, ,g' | \
$(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1 } \
{ d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \
if ($$2 == $$4) files[d] = files[d] " " $$1; \
else { print "f", $$3 "/" $$4, $$1; } } \
END { for (d in files) print "f", d, files[d] }' | \
while read type dir files; do \
if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \
test -z "$$files" || { \
echo " $(INSTALL_PROGRAM_ENV) $(INSTALL_PROGRAM) $$files '$(DESTDIR)$(bindir)$$dir'"; \
$(INSTALL_PROGRAM_ENV) $(INSTALL_PROGRAM) $$files "$(DESTDIR)$(bindir)$$dir" || exit $$?; \
} \
; done
uninstall-binPROGRAMS:
@$(NORMAL_UNINSTALL)
@list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \
files=`for p in $$list; do echo "$$p"; done | \
sed -e 'h;s,^.*/,,;s/$(EXEEXT)$$//;$(transform)' \
-e 's/$$/$(EXEEXT)/' \
`; \
test -n "$$list" || exit 0; \
echo " ( cd '$(DESTDIR)$(bindir)' && rm -f" $$files ")"; \
cd "$(DESTDIR)$(bindir)" && $(am__rm_f) $$files
clean-binPROGRAMS:
-$(am__rm_f) $(bin_PROGRAMS)
../$(am__dirstamp):
@$(MKDIR_P) ..
@: >>../$(am__dirstamp)
../$(DEPDIR)/$(am__dirstamp):
@$(MKDIR_P) ../$(DEPDIR)
@: >>../$(DEPDIR)/$(am__dirstamp)
../pekwm_dialog-pekwm_env.$(OBJEXT): ../$(am__dirstamp) \
../$(DEPDIR)/$(am__dirstamp)
pekwm_dialog$(EXEEXT): $(pekwm_dialog_OBJECTS) $(pekwm_dialog_DEPENDENCIES) $(EXTRA_pekwm_dialog_DEPENDENCIES)
@rm -f pekwm_dialog$(EXEEXT)
$(AM_V_CXXLD)$(pekwm_dialog_LINK) $(pekwm_dialog_OBJECTS) $(pekwm_dialog_LDADD) $(LIBS)
mostlyclean-compile:
-rm -f *.$(OBJEXT)
-rm -f ../*.$(OBJEXT)
distclean-compile:
-rm -f *.tab.c
@AMDEP_TRUE@@am__include@ @am__quote@../$(DEPDIR)/pekwm_dialog-pekwm_env.Po@am__quote@ # am--include-marker
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/pekwm_dialog-pekwm_dialog.Po@am__quote@ # am--include-marker
$(am__depfiles_remade):
@$(MKDIR_P) $(@D)
@: >>$@
am--depfiles: $(am__depfiles_remade)
.cc.o:
@am__fastdepCXX_TRUE@ $(AM_V_CXX)depbase=`echo $@ | sed 's|[^/]*$$|$(DEPDIR)/&|;s|\.o$$||'`;\
@am__fastdepCXX_TRUE@ $(CXXCOMPILE) -MT $@ -MD -MP -MF $$depbase.Tpo -c -o $@ $< &&\
@am__fastdepCXX_TRUE@ $(am__mv) $$depbase.Tpo $$depbase.Po
@AMDEP_TRUE@@am__fastdepCXX_FALSE@ $(AM_V_CXX)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
@am__fastdepCXX_FALSE@ $(AM_V_CXX@am__nodep@)$(CXXCOMPILE) -c -o $@ $<
.cc.obj:
@am__fastdepCXX_TRUE@ $(AM_V_CXX)depbase=`echo $@ | sed 's|[^/]*$$|$(DEPDIR)/&|;s|\.obj$$||'`;\
@am__fastdepCXX_TRUE@ $(CXXCOMPILE) -MT $@ -MD -MP -MF $$depbase.Tpo -c -o $@ `$(CYGPATH_W) '$<'` &&\
@am__fastdepCXX_TRUE@ $(am__mv) $$depbase.Tpo $$depbase.Po
@AMDEP_TRUE@@am__fastdepCXX_FALSE@ $(AM_V_CXX)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
@am__fastdepCXX_FALSE@ $(AM_V_CXX@am__nodep@)$(CXXCOMPILE) -c -o $@ `$(CYGPATH_W) '$<'`
pekwm_dialog-pekwm_dialog.o: pekwm_dialog.cc
@am__fastdepCXX_TRUE@ $(AM_V_CXX)$(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(pekwm_dialog_CXXFLAGS) $(CXXFLAGS) -MT pekwm_dialog-pekwm_dialog.o -MD -MP -MF $(DEPDIR)/pekwm_dialog-pekwm_dialog.Tpo -c -o pekwm_dialog-pekwm_dialog.o `test -f 'pekwm_dialog.cc' || echo '$(srcdir)/'`pekwm_dialog.cc
@am__fastdepCXX_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/pekwm_dialog-pekwm_dialog.Tpo $(DEPDIR)/pekwm_dialog-pekwm_dialog.Po
@AMDEP_TRUE@@am__fastdepCXX_FALSE@ $(AM_V_CXX)source='pekwm_dialog.cc' object='pekwm_dialog-pekwm_dialog.o' libtool=no @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
@am__fastdepCXX_FALSE@ $(AM_V_CXX@am__nodep@)$(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(pekwm_dialog_CXXFLAGS) $(CXXFLAGS) -c -o pekwm_dialog-pekwm_dialog.o `test -f 'pekwm_dialog.cc' || echo '$(srcdir)/'`pekwm_dialog.cc
pekwm_dialog-pekwm_dialog.obj: pekwm_dialog.cc
@am__fastdepCXX_TRUE@ $(AM_V_CXX)$(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(pekwm_dialog_CXXFLAGS) $(CXXFLAGS) -MT pekwm_dialog-pekwm_dialog.obj -MD -MP -MF $(DEPDIR)/pekwm_dialog-pekwm_dialog.Tpo -c -o pekwm_dialog-pekwm_dialog.obj `if test -f 'pekwm_dialog.cc'; then $(CYGPATH_W) 'pekwm_dialog.cc'; else $(CYGPATH_W) '$(srcdir)/pekwm_dialog.cc'; fi`
@am__fastdepCXX_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/pekwm_dialog-pekwm_dialog.Tpo $(DEPDIR)/pekwm_dialog-pekwm_dialog.Po
@AMDEP_TRUE@@am__fastdepCXX_FALSE@ $(AM_V_CXX)source='pekwm_dialog.cc' object='pekwm_dialog-pekwm_dialog.obj' libtool=no @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
@am__fastdepCXX_FALSE@ $(AM_V_CXX@am__nodep@)$(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(pekwm_dialog_CXXFLAGS) $(CXXFLAGS) -c -o pekwm_dialog-pekwm_dialog.obj `if test -f 'pekwm_dialog.cc'; then $(CYGPATH_W) 'pekwm_dialog.cc'; else $(CYGPATH_W) '$(srcdir)/pekwm_dialog.cc'; fi`
../pekwm_dialog-pekwm_env.o: ../pekwm_env.cc
@am__fastdepCXX_TRUE@ $(AM_V_CXX)$(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(pekwm_dialog_CXXFLAGS) $(CXXFLAGS) -MT ../pekwm_dialog-pekwm_env.o -MD -MP -MF ../$(DEPDIR)/pekwm_dialog-pekwm_env.Tpo -c -o ../pekwm_dialog-pekwm_env.o `test -f '../pekwm_env.cc' || echo '$(srcdir)/'`../pekwm_env.cc
@am__fastdepCXX_TRUE@ $(AM_V_at)$(am__mv) ../$(DEPDIR)/pekwm_dialog-pekwm_env.Tpo ../$(DEPDIR)/pekwm_dialog-pekwm_env.Po
@AMDEP_TRUE@@am__fastdepCXX_FALSE@ $(AM_V_CXX)source='../pekwm_env.cc' object='../pekwm_dialog-pekwm_env.o' libtool=no @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
@am__fastdepCXX_FALSE@ $(AM_V_CXX@am__nodep@)$(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(pekwm_dialog_CXXFLAGS) $(CXXFLAGS) -c -o ../pekwm_dialog-pekwm_env.o `test -f '../pekwm_env.cc' || echo '$(srcdir)/'`../pekwm_env.cc
../pekwm_dialog-pekwm_env.obj: ../pekwm_env.cc
@am__fastdepCXX_TRUE@ $(AM_V_CXX)$(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(pekwm_dialog_CXXFLAGS) $(CXXFLAGS) -MT ../pekwm_dialog-pekwm_env.obj -MD -MP -MF ../$(DEPDIR)/pekwm_dialog-pekwm_env.Tpo -c -o ../pekwm_dialog-pekwm_env.obj `if test -f '../pekwm_env.cc'; then $(CYGPATH_W) '../pekwm_env.cc'; else $(CYGPATH_W) '$(srcdir)/../pekwm_env.cc'; fi`
@am__fastdepCXX_TRUE@ $(AM_V_at)$(am__mv) ../$(DEPDIR)/pekwm_dialog-pekwm_env.Tpo ../$(DEPDIR)/pekwm_dialog-pekwm_env.Po
@AMDEP_TRUE@@am__fastdepCXX_FALSE@ $(AM_V_CXX)source='../pekwm_env.cc' object='../pekwm_dialog-pekwm_env.obj' libtool=no @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
@am__fastdepCXX_FALSE@ $(AM_V_CXX@am__nodep@)$(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(pekwm_dialog_CXXFLAGS) $(CXXFLAGS) -c -o ../pekwm_dialog-pekwm_env.obj `if test -f '../pekwm_env.cc'; then $(CYGPATH_W) '../pekwm_env.cc'; else $(CYGPATH_W) '$(srcdir)/../pekwm_env.cc'; fi`
ID: $(am__tagged_files)
$(am__define_uniq_tagged_files); mkid -fID $$unique
tags: tags-am
TAGS: tags
tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
set x; \
here=`pwd`; \
$(am__define_uniq_tagged_files); \
shift; \
if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
test -n "$$unique" || unique=$$empty_fix; \
if test $$# -gt 0; then \
$(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
"$$@" $$unique; \
else \
$(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
$$unique; \
fi; \
fi
ctags: ctags-am
CTAGS: ctags
ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
$(am__define_uniq_tagged_files); \
test -z "$(CTAGS_ARGS)$$unique" \
|| $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
$$unique
GTAGS:
here=`$(am__cd) $(top_builddir) && pwd` \
&& $(am__cd) $(top_srcdir) \
&& gtags -i $(GTAGS_ARGS) "$$here"
cscopelist: cscopelist-am
cscopelist-am: $(am__tagged_files)
list='$(am__tagged_files)'; \
case "$(srcdir)" in \
[\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
*) sdir=$(subdir)/$(srcdir) ;; \
esac; \
for i in $$list; do \
if test -f "$$i"; then \
echo "$(subdir)/$$i"; \
else \
echo "$$sdir/$$i"; \
fi; \
done >> $(top_builddir)/cscope.files
distclean-tags:
-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
distdir: $(BUILT_SOURCES)
$(MAKE) $(AM_MAKEFLAGS) distdir-am
distdir-am: $(DISTFILES)
@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
list='$(DISTFILES)'; \
dist_files=`for file in $$list; do echo $$file; done | \
sed -e "s|^$$srcdirstrip/||;t" \
-e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
case $$dist_files in \
*/*) $(MKDIR_P) `echo "$$dist_files" | \
sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
sort -u` ;; \
esac; \
for file in $$dist_files; do \
if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
if test -d $$d/$$file; then \
dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
if test -d "$(distdir)/$$file"; then \
find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
fi; \
if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
fi; \
cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
else \
test -f "$(distdir)/$$file" \
|| cp -p $$d/$$file "$(distdir)/$$file" \
|| exit 1; \
fi; \
done
check-am: all-am
check: check-am
all-am: Makefile $(PROGRAMS)
installdirs:
for dir in "$(DESTDIR)$(bindir)"; do \
test -z "$$dir" || $(MKDIR_P) "$$dir"; \
done
install: install-am
install-exec: install-exec-am
install-data: install-data-am
uninstall: uninstall-am
install-am: all-am
@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
installcheck: installcheck-am
install-strip:
if test -z '$(STRIP)'; then \
$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
install; \
else \
$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
"INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
fi
mostlyclean-generic:
clean-generic:
distclean-generic:
-$(am__rm_f) $(CONFIG_CLEAN_FILES)
-test . = "$(srcdir)" || $(am__rm_f) $(CONFIG_CLEAN_VPATH_FILES)
-$(am__rm_f) ../$(DEPDIR)/$(am__dirstamp)
-$(am__rm_f) ../$(am__dirstamp)
maintainer-clean-generic:
@echo "This command is intended for maintainers to use"
@echo "it deletes files that may require special tools to rebuild."
clean: clean-am
clean-am: clean-binPROGRAMS clean-generic mostlyclean-am
distclean: distclean-am
-rm -f ../$(DEPDIR)/pekwm_dialog-pekwm_env.Po
-rm -f ./$(DEPDIR)/pekwm_dialog-pekwm_dialog.Po
-rm -f Makefile
distclean-am: clean-am distclean-compile distclean-generic \
distclean-tags
dvi: dvi-am
dvi-am:
html: html-am
html-am:
info: info-am
info-am:
install-data-am:
install-dvi: install-dvi-am
install-dvi-am:
install-exec-am: install-binPROGRAMS
install-html: install-html-am
install-html-am:
install-info: install-info-am
install-info-am:
install-man:
install-pdf: install-pdf-am
install-pdf-am:
install-ps: install-ps-am
install-ps-am:
installcheck-am:
maintainer-clean: maintainer-clean-am
-rm -f ../$(DEPDIR)/pekwm_dialog-pekwm_env.Po
-rm -f ./$(DEPDIR)/pekwm_dialog-pekwm_dialog.Po
-rm -f Makefile
maintainer-clean-am: distclean-am maintainer-clean-generic
mostlyclean: mostlyclean-am
mostlyclean-am: mostlyclean-compile mostlyclean-generic
pdf: pdf-am
pdf-am:
ps: ps-am
ps-am:
uninstall-am: uninstall-binPROGRAMS
.MAKE: install-am install-strip
.PHONY: CTAGS GTAGS TAGS all all-am am--depfiles check check-am clean \
clean-binPROGRAMS clean-generic cscopelist-am ctags ctags-am \
distclean distclean-compile distclean-generic distclean-tags \
distdir dvi dvi-am html html-am info info-am install \
install-am install-binPROGRAMS install-data install-data-am \
install-dvi install-dvi-am install-exec install-exec-am \
install-html install-html-am install-info install-info-am \
install-man install-pdf install-pdf-am install-ps \
install-ps-am install-strip installcheck installcheck-am \
installdirs maintainer-clean maintainer-clean-generic \
mostlyclean mostlyclean-compile mostlyclean-generic pdf pdf-am \
ps ps-am tags tags-am uninstall uninstall-am \
uninstall-binPROGRAMS
.PRECIOUS: Makefile
# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT:
# Tell GNU make to disable its built-in pattern rules.
%:: %,v
%:: RCS/%,v
%:: RCS/%
%:: s.%
%:: SCCS/s.%
pekwm-0.4.4/src/dialog/pekwm_dialog.cc 0000664 0001750 0001750 00000030323 15126136025 013326 //
// pekwm_dialog.cc for pekwm
// Copyright (C) 2021-2025 Claes Nästén
//
// This program is licensed under the GNU GPL.
// See the LICENSE file for more information.
//
#include "CfgParser.hh"
#include "Charset.hh"
#include "Debug.hh"
#include "Util.hh"
#include "X11.hh"
#include "../pekwm_env.hh"
#include "pekwm_dialog.hh"
#include
#include
#include
#include
#include
#include "../tk/CfgUtil.hh"
#include "../tk/FontHandler.hh"
#include "../tk/ImageHandler.hh"
#include "../tk/PPixmapSurface.hh"
#include "../tk/PWinObj.hh"
#include "../tk/Render.hh"
#include "../tk/TextureHandler.hh"
#include "../tk/Theme.hh"
#include "../tk/ThemeUtil.hh"
#include "../tk/X11Util.hh"
#include "../tk/TkWidget.hh"
#include "../tk/TkButtonRow.hh"
#include "../tk/TkImage.hh"
#include "../tk/TkText.hh"
extern "C" {
#include
#include
#include
#include
#include
}
static const uint WIDTH_DEFAULT = 250;
static const uint HEIGHT_DEFAULT = 50;
static std::string _config_script_path;
static ObserverMapping *_observer_mapping = nullptr;
static FontHandler* _font_handler = nullptr;
static ImageHandler* _image_handler = nullptr;
static TextureHandler* _texture_handler = nullptr;
PekwmDialog* PekwmDialog::_instance = nullptr;
namespace pekwm
{
const std::string& configScriptPath()
{
return _config_script_path;
}
ObserverMapping* observerMapping()
{
return _observer_mapping;
}
FontHandler* fontHandler()
{
return _font_handler;
}
ImageHandler* imageHandler()
{
return _image_handler;
}
TextureHandler* textureHandler()
{
return _texture_handler;
}
}
PekwmDialog::PekwmDialog(const std::string &theme_dir,
const std::string &theme_variant,
const Geometry &gm, int gm_mask, int decorations,
bool raise, const PekwmDialogConfig& config)
: X11App(gm, gm_mask, config.getTitle(),
"dialog", "pekwm_dialog", WINDOW_TYPE_DIALOG,
nullptr, true),
_initial_gm(gm),
_theme(_font_handler, _image_handler, _texture_handler,
theme_dir, theme_variant),
_data(_theme.getDialogData()),
_raise(raise)
{
X11::selectInput(_window, ExposureMask|StructureNotifyMask);
assert(_instance == nullptr);
_instance = this;
if (decorations) {
MwmHints mwm_hints(MWM_HINTS_DECORATIONS, 0, decorations);
X11Util::setMwmHints(_window, mwm_hints);
}
// TODO: setup size minimum based on image
initWidgets(config);
placeWidgets();
}
PekwmDialog::~PekwmDialog(void)
{
std::vector::iterator it = _widgets.begin();
for (; it != _widgets.end(); ++it) {
delete *it;
}
_instance = nullptr;
}
void
PekwmDialog::handleEvent(XEvent *ev)
{
switch (ev->type) {
case ButtonPress:
setState(ev->xbutton.window, BUTTON_STATE_PRESSED);
break;
case ButtonRelease:
click(ev->xbutton.window);
break;
case ConfigureNotify:
resize(ev->xconfigure.width, ev->xconfigure.height);
break;
case EnterNotify:
setState(ev->xbutton.window, BUTTON_STATE_HOVER);
break;
case Expose:
render();
break;
case LeaveNotify:
setState(ev->xbutton.window, BUTTON_STATE_FOCUSED);
break;
case MapNotify:
break;
case ReparentNotify:
break;
case UnmapNotify:
break;
default:
P_DBG("UNKNOWN EVENT " << ev->type);
break;
}
}
void
PekwmDialog::resize(uint width, uint height)
{
if (_gm.width == width && _gm.height == height) {
return;
}
_gm.width = width;
_gm.height = height;
// FIXME: first pass calculating "important" height req, then
// assign size left to image
int y = 0;
std::vector::iterator it = _widgets.begin();
for (; it != _widgets.end(); ++it) {
(*it)->place((*it)->getX(), y, width, height);
(*it)->setHeight((*it)->heightReq(width));
y += (*it)->getHeight();
}
render();
}
void
PekwmDialog::show(void)
{
render();
if (_raise) {
X11::mapRaised(_window);
} else {
X11::mapWindow(_window);
}
}
void
PekwmDialog::render()
{
Drawable draw;
if (hasBuffer()) {
draw = getRenderDrawable();
} else {
if (_background.resize(_gm.width, _gm.height)) {
setBackground(_background.getDrawable());
}
draw = _background.getDrawable();
}
X11Render rend(draw, None);
RenderSurface surface(rend, _gm);
_data->getBackground()->render(rend, 0, 0, _gm.width, _gm.height);
std::vector::iterator it = _widgets.begin();
for (; it != _widgets.end(); ++it) {
(*it)->render(rend, surface);
}
if (hasBuffer()) {
swapBuffer();
} else {
X11::clearWindow(_window);
}
}
void
PekwmDialog::setState(Window window, ButtonState state)
{
std::vector::iterator it = _widgets.begin();
for (; it != _widgets.end(); ++it) {
if ((*it)->setState(window, state)) {
break;
}
}
}
void
PekwmDialog::click(Window window)
{
std::vector::iterator it = _widgets.begin();
for (; it != _widgets.end(); ++it) {
if ((*it)->click(window)) {
break;
}
}
}
void
PekwmDialog::initWidgets(const PekwmDialogConfig& config)
{
if (! config.getTitle().empty()) {
TkWidget* widget =
new TkText(_data, *this, config.getTitle(), true);
_widgets.push_back(widget);
}
if (config.getImage() != nullptr) {
TkWidget* widget =
new TkImage(_data, *this, config.getImage());
_widgets.push_back(widget);
}
if (! config.getMessage().empty()) {
TkWidget* widget =
new TkText(_data, *this, config.getMessage(), false);
_widgets.push_back(widget);
}
_widgets.push_back(new TkButtonRow(_data, *this,
PekwmDialog::stopDialog,
config.getOptions()));
}
void
PekwmDialog::placeWidgets(void)
{
// height is dependent on the available width, get requested
// width first.
uint width = _initial_gm.width;
std::vector::iterator it = _widgets.begin();
for (; it != _widgets.end(); ++it) {
uint width_req = (*it)->widthReq();
if (width_req && width_req > width) {
width = width_req;
}
}
if (width == 0) {
float scale = pekwm::textureHandler()->getScale();
width = ThemeUtil::scaledPixelValue(scale, WIDTH_DEFAULT);
}
uint y = 0;
it = _widgets.begin();
for (; it != _widgets.end(); ++it) {
(*it)->place(0, y, width, 0);
(*it)->setHeight((*it)->heightReq(width));
y += (*it)->getHeight();
}
PWinObj::resize(std::max(width, _initial_gm.width),
std::max(y, _initial_gm.height));
}
void
PekwmDialog::themeChanged(const std::string& name, const std::string& variant,
float scale)
{
bool scale_changed = scale != _texture_handler->getScale();
if (scale_changed) {
_font_handler->setScale(scale);
_image_handler->setScale(scale);
_texture_handler->setScale(scale);
}
_theme.load(name, variant, scale_changed /* force */);
placeWidgets();
render();
}
void
PekwmDialog::stopDialog(int retcode)
{
PekwmDialog::instance()->stop(retcode);
}
static void init(Display* dpy, float scale, bool font_default_x11,
const std::string &font_charset_override)
{
_observer_mapping = new ObserverMapping();
_font_handler = new FontHandler(scale, font_default_x11,
font_charset_override);
_image_handler = new ImageHandler(scale);
_texture_handler = new TextureHandler(scale);
}
static void cleanup()
{
delete _texture_handler;
delete _image_handler;
delete _font_handler;
delete _observer_mapping;
}
static void usage(const char* name, int ret)
{
std::cout << "usage: " << name;
std::cout << " [-dDhitfl] [-o option|-o option...] message"
<< std::endl;
std::cout << " -d --display dpy Display" << std::endl;
std::cout << " -D --decorations str [all|no-border|no-titlebar]"
<< std::endl;
std::cout << " -h --help Display this information"
<< std::endl;
std::cout << " -i --image Image under title" << std::endl;
std::cout << " -o --option Option (many allowed)"
<< std::endl;
std::cout << " -t --title Dialog title" << std::endl;
std::cout << " -f --log-file Set log file" << std::endl;
std::cout << " -l --log-level Set log level" << std::endl;
exit(ret);
}
static int
parse_decorations(const std::string& decorations)
{
if (decorations.empty() || decorations == "all") {
return MWM_DECOR_ALL;
}
int mask = MWM_DECOR_BORDER | MWM_DECOR_TITLE;
std::vector toks;
Util::splitString(decorations, toks, ",");
std::vector::iterator it(toks.begin());
for (; it != toks.end(); ++it) {
if (*it == "no-border") {
mask &= ~MWM_DECOR_BORDER;
} else if (*it == "no-titlebar") {
mask &= ~MWM_DECOR_TITLE;
} else {
std::cerr << "unknown decor: " << *it << std::endl;
}
}
return mask;
}
int main(int argc, char* argv[])
{
pledge_x11_required("");
const char* display = NULL;
Geometry gm(0, 0, 0, 0);
int gm_mask = WIDTH_VALUE | HEIGHT_VALUE;
bool raise;
std::string title;
std::string config_file = Util::getEnv("PEKWM_CONFIG_FILE");
std::string image_name;
std::vector options;
int decorations = 0;
const struct option opts[] = {
{const_cast("config"), required_argument, nullptr, 'c'},
{const_cast("display"), required_argument, nullptr,
'd'},
{const_cast("decoration"), required_argument, nullptr,
'D'},
{const_cast("geometry"), required_argument, nullptr,
'g'},
{const_cast("help"), no_argument, nullptr, 'h'},
{const_cast("image"), required_argument, nullptr, 'i'},
{const_cast("option"), required_argument, nullptr, 'o'},
{const_cast("raise"), no_argument, nullptr, 'r'},
{const_cast("title"), required_argument, nullptr, 't'},
{const_cast("log-level"), required_argument, nullptr,
'l'},
{const_cast("log-file"), required_argument, nullptr,
'f'},
{nullptr, 0, nullptr, 0}
};
Charset::init();
initEnv(false);
int ch;
while ((ch = getopt_long(argc, argv, "c:d:D:g:hi:o:rt:",
opts, nullptr)) != -1) {
switch (ch) {
case 'c':
config_file = optarg;
break;
case 'd':
display = optarg;
break;
case 'D':
decorations = parse_decorations(optarg);
break;
case 'g':
gm_mask |= X11::parseGeometry(optarg, gm);
break;
case 'h':
usage(argv[0], 0);
break;
case 'i':
image_name = optarg;
Util::expandFileName(image_name);
break;
case 'o':
options.push_back(optarg);
break;
case 'r':
raise = true;
break;
case 't':
title = optarg;
break;
case 'f':
if (! Debug::setLogFile(optarg)) {
std::cerr << "Failed to open log file "
<< optarg << std::endl;
}
break;
case 'l':
Debug::setLevel(Debug::getLevel(optarg));
break;
default:
usage(argv[0], 1);
break;
}
}
if (config_file.empty()) {
config_file = Util::getConfigDir() + "/config";
}
Util::expandFileName(config_file);
std::string message;
for (int i = optind; i < argc; i++) {
if (i > optind) {
message += ' ';
}
message += argv[i];
}
Display *dpy = XOpenDisplay(display);
if (! dpy) {
std::string actual_display =
display ? display : Util::getEnv("DISPLAY");
std::cerr << "Can not open display!" << std::endl
<< "Your DISPLAY variable currently is set to: "
<< actual_display << std::endl;
return 1;
}
float scale;
std::string theme_dir, theme_variant;
bool font_default_x11;
std::string font_charset_override;
{
CfgParser cfg(CfgParserOpt(""));
cfg.parse(config_file, CfgParserSource::SOURCE_FILE, true);
std::string theme_path;
CfgUtil::getScreenScale(cfg.getEntryRoot(), scale);
CfgUtil::getThemeDir(cfg.getEntryRoot(),
theme_dir, theme_variant, theme_path);
CfgUtil::getFontSettings(cfg.getEntryRoot(),
font_default_x11,
font_charset_override);
}
X11::init(dpy, true);
init(dpy, scale, font_default_x11, font_charset_override);
if (gm.width == 0) {
gm.width = ThemeUtil::scaledPixelValue(scale, WIDTH_DEFAULT);
}
if (gm.height == 0) {
gm.height = ThemeUtil::scaledPixelValue(scale, HEIGHT_DEFAULT);
}
_image_handler->path_push_back("./");
PImage *image = nullptr;
if (image_name.size()) {
image = _image_handler->getImage(image_name);
if (image) {
image->setType(IMAGE_TYPE_SCALED);
}
}
int ret;
{
// run in separate scope to get Theme destructed before cleanup
PekwmDialogConfig config(title, image, message, options);
PekwmDialog dialog(theme_dir, theme_variant,
gm, gm_mask, decorations, raise, config);
dialog.show();
ret = dialog.main(60);
}
if (image) {
_image_handler->returnImage(image);
}
cleanup();
X11::destruct();
Charset::destruct();
return ret;
}
pekwm-0.4.4/src/sys/ 0000775 0001750 0001750 00000000000 15164641623 010022 5 pekwm-0.4.4/src/sys/SysMonitorChange.cc 0000664 0001750 0001750 00000002761 15126136025 013504 //
// SysResources.cc for pekwm
// Copyright (C) 2025 Claes Nästén
//
// This program is licensed under the GNU GPL.
// See the LICENSE file for more information.
//
#include "Debug.hh"
#include "SysMonitorChange.hh"
SysMonitorChange::SysMonitorChange()
: _fd(-1)
{
#ifdef PEKWM_HAVE_LIBUDEV
_udev = udev_new();
if (_udev == nullptr) {
P_ERR("failed to create udev");
return;
}
_mon = udev_monitor_new_from_netlink(_udev, "udev");
if (_mon == nullptr) {
P_ERR("failed to create udev monitor");
return;
}
udev_monitor_filter_add_match_subsystem_devtype(_mon, "drm", nullptr);
udev_monitor_enable_receiving(_mon);
_fd = udev_monitor_get_fd(_mon);
#endif // PEKWM_HAVE_LIBUDEV
}
SysMonitorChange::~SysMonitorChange()
{
#ifdef PEKWM_HAVE_LIBUDEV
if (_mon) {
udev_monitor_unref(_mon);
}
if (_udev) {
udev_unref(_udev);
}
#endif // PEKWM_HAVE_LIBUDEV
}
bool
SysMonitorChange::handle()
{
#ifdef PEKWM_HAVE_LIBUDEV
struct udev_device *dev = udev_monitor_receive_device(_mon);
if (dev == nullptr) {
P_TRACE("no device received");
return false;
}
const char *action = udev_device_get_action(dev);
const char *sysname = udev_device_get_sysname(dev);
const char *status = udev_device_get_sysattr_value(dev, "status");
if (status == nullptr) {
status = "unknown";
}
P_TRACE("libudev: " << action << " sysname: " << sysname << " status: "
<< status);
udev_device_unref(dev);
return true;
#else // !PEKWM_HAVE_LIBUDEV
return false;
#endif // PEKWM_HAVE_LIBUDEV
}
pekwm-0.4.4/src/sys/SysMonitorChange.hh 0000664 0001750 0001750 00000001441 15126136025 013510 //
// SysMonitorChange.hh for pekwm
// Copyright (C) 2025 Claes Nästén
//
// This program is licensed under the GNU GPL.
// See the LICENSE file for more information.
//
#ifndef _PEKWM_SYS_MONITOR_CHANGE_HH_
#define _PEKWM_SYS_MONITOR_CHANGE_HH_
#include "config.h"
#include "Compat.hh"
extern "C" {
#ifdef PEKWM_HAVE_LIBUDEV
#include
#endif // PEKWM_HAVE_LIBUDEV
}
class SysMonitorChange {
public:
SysMonitorChange();
~SysMonitorChange();
int getFd() const { return _fd; }
bool handle();
private:
SysMonitorChange(const SysMonitorChange&);
SysMonitorChange& operator=(const SysMonitorChange&);
int _fd;
#ifdef PEKWM_HAVE_LIBUDEV
struct udev *_udev;
struct udev_monitor *_mon;
#endif // PEKWM_HAVE_LIBUDEV
};
#endif // _PEKWM_SYS_MONITOR_CHANGE_HH_
pekwm-0.4.4/src/sys/SysResources.hh 0000664 0001750 0001750 00000002723 15126136025 012731 //
// SysResources.hh for pekwm
// Copyright (C) 2025 Claes Nästén
//
// This program is licensed under the GNU GPL.
// See the LICENSE file for more information.
//
#ifndef _PEKWM_SYS_RESOURCES_HH_
#define _PEKWM_SYS_RESOURCES_HH_
#include
#include "Daytime.hh"
#include "SysConfig.hh"
#include "X11.hh"
class SysResources {
public:
SysResources(const SysConfig &cfg);
~SysResources();
void setLocationCountry(const std::string &location_country)
{
_location_country = location_country;
}
void setLocationCity(const std::string &location_city)
{
_location_city = location_city;
}
void update(const Daytime &daytime, TimeOfDay tod);
void setXResourceDpi();
void notifyXTerms();
void setConfiguredXResources(TimeOfDay tod);
private:
void setXAtoms(const char *theme_variant);
void setXResources(const Daytime &daytime, TimeOfDay tod,
const char *daylight, const char *theme_variant);
void setXResourcesMap(const SysConfig::string_map &x_resources,
const char *ctx);
void removeStaleThemeXresources();
void notifyXTerm(Window win);
bool readClientList(std::vector &windowsv);
uint calcXTermHash();
const SysConfig &_cfg;
std::string _location_country;
std::string _location_city;
uint _xterm_hash;
/** current theme X resources, tracked separately in order to support
* removing old resources when changing theme. */
SysConfig::string_map _theme_x_resources;
};
#endif // _PEKWM_SYS_RESOURCES_HH_
pekwm-0.4.4/src/sys/XSettings.hh 0000664 0001750 0001750 00000007365 15126136025 012217 //
// XSettings.hh for pekwm
// Copyright (C) 2025 Claes Nästén
//
// This program is licensed under the GNU GPL.
// See the LICENSE file for more information.
//
#ifndef _PEKWM_XSETTINGS_HH_
#define _PEKWM_XSETTINGS_HH_
#include "CfgParserSource.hh"
#include "Types.hh"
#include "X11.hh"
#include
extern "C" {
#ifdef PEKWM_HAVE_STDINT_H
#include
#endif // PEKWM_HAVE_STDINT_H
}
enum XSettingType {
XSETTING_TYPE_INTEGER = 0,
XSETTING_TYPE_STRING = 1,
XSETTING_TYPE_COLOR = 2
};
class XSetting {
public:
virtual ~XSetting() { }
enum XSettingType getType() const { return _type; }
uint32_t getLastChanged() const { return _last_changed; }
void setLastChanged(unsigned long last_changed)
{
_last_changed = last_changed;
}
virtual void write(std::ostream &os, const std::string& name);
virtual std::string toString() const = 0;
static bool validateName(const std::string &name, std::string &error);
protected:
XSetting(enum XSettingType type)
: _type(type),
_last_changed(0)
{
}
void writePad(std::ostream &os, size_t len, size_t multiple);
private:
enum XSettingType _type;
uint32_t _last_changed;
};
/**
* String, 32bit length.
*/
class XSettingString : public XSetting {
public:
XSettingString(const std::string &value)
: XSetting(XSETTING_TYPE_STRING),
_value(value)
{
}
virtual ~XSettingString() { }
virtual void write(std::ostream &os, const std::string& name);
virtual std::string toString() const;
const std::string &getValue() const { return _value; }
private:
std::string _value;
};
/**
* Integer 32bit signed.
*/
class XSettingInteger : public XSetting {
public:
XSettingInteger(int32_t value)
: XSetting(XSETTING_TYPE_INTEGER),
_value(value)
{
}
virtual ~XSettingInteger() { }
virtual void write(std::ostream &os, const std::string& name);
virtual std::string toString() const;
int32_t getValue() const { return _value; }
private:
int32_t _value;
};
/**
* Color with alpha.
*
* 2 r (uint16)
* 2 g (uint16)
* 2 b (uint16)
* 2 a (uint16)
*/
class XSettingColor : public XSetting {
public:
XSettingColor(uint16_t r, uint16_t g, uint16_t b, uint16_t a)
: XSetting(XSETTING_TYPE_COLOR),
_r(r),
_g(g),
_b(b),
_a(a)
{
}
virtual ~XSettingColor() { }
virtual void write(std::ostream &os, const std::string& name);
virtual std::string toString() const;
uint16_t getR() const { return _r; }
uint16_t getG() const { return _g; }
uint16_t getB() const { return _b; }
uint16_t getA() const { return _a; }
private:
uint16_t _r;
uint16_t _g;
uint16_t _b;
uint16_t _a;
};
XSetting *mkXSetting(const std::string& str);
class XSettings {
public:
typedef std::map map;
XSettings();
~XSettings();
bool isOwner() const { return _owner; }
void setOwner(bool owner) { _owner = owner; }
Atom getAtom() const { return _session_atom; }
bool setServerOwner();
void clearServerOwner();
void updateServer();
void selectOwnerDestroyInput();
bool load(const std::string &source,
CfgParserSource::Type type = CfgParserSource::SOURCE_FILE);
bool save(const std::string &path);
void save(std::ostream &os);
const XSetting *get(const std::string &name) const;
void setString(const std::string &name, const std::string &value);
void setInt32(const std::string &name, int32_t value);
void setColor(const std::string &name, uint16_t r, uint16_t g,
uint16_t b, uint16_t a);
void remove(const std::string &name);
protected:
void writeProp(std::ostream &os, unsigned long serial);
private:
void set(const std::string &name, XSetting *setting);
void sendOwnerMessage(Time timestamp);
unsigned long getTime(Time &cur_time) const;
Window _window;
Atom _session_atom;
bool _owner;
map _settings;
};
#endif // _PEKWM_XSETTINGS_HH_
pekwm-0.4.4/src/sys/CMakeLists.txt 0000664 0001750 0001750 00000000671 15126136025 012477 cmake_minimum_required(VERSION 3.10)
add_executable(pekwm_sys
pekwm_sys.cc
SysConfig.cc
SysResources.cc
SysMonitorChange.cc
SysMonitorConfig.cc
XSettings.cc)
target_include_directories(pekwm_sys PUBLIC ${common_INCLUDE_DIRS}
${LIBUDEV_INCLUDE_DIRS})
target_link_libraries(pekwm_sys tk lib ${common_LIBRARIES}
${LIBUDEV_LINK_LIBRARIES})
install(TARGETS pekwm_sys DESTINATION bin)
pekwm-0.4.4/src/sys/pekwm_sys.cc 0000664 0001750 0001750 00000040532 15126136025 012267 //
// pekwm_sys.cc for pekwm
// Copyright (C) 2025 Claes Nästén
//
// This program is licensed under the GNU GPL.
// See the LICENSE file for more information.
//
#include "pekwm_sys.hh"
#include "Calendar.hh"
#include "Compat.hh"
#include "CfgParser.hh"
#include "Debug.hh"
#include "String.hh"
#include "SysMonitorConfig.hh"
#include "Location.hh"
#include "Mem.hh"
#include "Util.hh"
#include "X11.hh"
#include "../tk/Hooks.hh"
#include "../tk/ThemeUtil.hh"
extern "C" {
#include
#include
}
enum PekwmSysAction {
PEKWM_SYS_DAY_CHANGED
};
static bool _is_sigchld = false;
static Hooks *_hooks = nullptr;
#ifndef UNITTEST
static const char *progname = nullptr;
extern "C" {
static void sigHandler(int signal)
{
switch (signal) {
case SIGCHLD:
_is_sigchld = true;
break;
default:
// do nothing
break;
}
}
}
#endif // UNITTEST
/** static pekwm resources, accessed via the pekwm namespace. */
static std::string _config_script_path;
namespace pekwm
{
const std::string& configScriptPath()
{
return _config_script_path;
}
Hooks *hooks()
{
return _hooks;
}
}
PekwmSys::PekwmSys(const std::string &config_file, bool interactive, Os *os)
: _stop(false),
_interactive(interactive),
_os(os),
_select(mkOsSelect()),
_cfg(config_file, os),
_resources(_cfg),
_tod(static_cast(-1)),
_tod_override(static_cast(-1))
{
}
PekwmSys::~PekwmSys()
{
delete _select;
}
int
PekwmSys::main(const std::string &theme)
{
if (! _cfg.parseConfig()) {
std::cerr << "failed to parse configuration" << std::endl;
return 1;
}
if (! pekwm::ascii_ncase_equal(_cfg.getTimeOfDay(), "AUTO")) {
P_TRACE("using static time of day " << _cfg.getTimeOfDay());
time_of_day_from_string(_cfg.getTimeOfDay(), _tod_override);
}
// load theme before time of day detection, to get the right resources
// set the first time around
handleTheme(theme);
// get location in order to have correct theme and X resources setup.
updateLocation();
// init time of day
TimeOfDay tod = updateDaytime(time(NULL));
_tod = timeOfDayChanged(getEffectiveTimeOfDay(tod));
// run after first time of day change to get properties initial values
// set.
if (! _cfg.getXSettingsPath().empty()
&& _os->pathExists(_cfg.getXSettingsPath())) {
_xsettings.load(_cfg.getXSettingsPath());
}
if (_cfg.isXSettingsEnabled()) {
_xsettings.setServerOwner();
if (! _cfg.getNetIconTheme().empty()) {
setNetIconTheme();
}
setDpi();
_xsettings.updateServer();
}
_select->add(STDIN_FILENO, OsSelect::OS_SELECT_READ);
_select->add(X11::getFd(), OsSelect::OS_SELECT_READ);
if (_monitor_change.getFd() >= 0) {
P_TRACE("listening for udev changes on "
<< _monitor_change.getFd());
_select->add(_monitor_change.getFd(), OsSelect::OS_SELECT_READ);
}
P_TRACE("Enter event loop.");
do {
if (_is_sigchld) {
handleSigchld();
_is_sigchld = false;
}
XEvent ev;
struct timeval *tv;
TimeoutAction action;
if (_timeouts.getNextTimeout(&tv, action)) {
// only action handled is time of day change
tod = updateDaytime(time(NULL));
_tod = timeOfDayChanged(getEffectiveTimeOfDay(tod));
} else if (X11::pending() > 0) {
X11::getNextEvent(ev);
handleXEvent(ev);
} else if (_select->wait(tv)) {
if (_select->isSet(X11::getFd(),
OsSelect::OS_SELECT_READ)) {
X11::getNextEvent(ev);
handleXEvent(ev);
} else if (_select->isSet(STDIN_FILENO,
OsSelect::OS_SELECT_READ)) {
handleStdin();
} else if (_select->isSet(_monitor_change.getFd(),
OsSelect::OS_SELECT_READ)) {
handleMonitorChange();
}
}
} while (! _stop);
return 0;
}
void
PekwmSys::handleSigchld()
{
int status;
while (waitpid(-1, &status, WNOHANG) > 0) {
}
}
void
PekwmSys::handleXEvent(XEvent &ev)
{
P_TRACE("got X11 event " << X11::getEventTypeString(ev.type));
switch (ev.type) {
case DestroyNotify:
if (_cfg.isXSettingsEnabled() && _xsettings.setServerOwner()) {
_xsettings.updateServer();
}
break;
case SelectionClear:
if (ev.xselectionclear.selection == _xsettings.getAtom()) {
_xsettings.setOwner(false);
_xsettings.selectOwnerDestroyInput();
P_LOG("no longer owner of xsettings");
}
break;
default:
break;
};
}
void
PekwmSys::handleStdin()
{
std::string buf;
std::vector args;
if (_interactive) {
std::getline(std::cin, buf);
args = StringUtil::shell_split(buf);
} else {
uint32_t len;
std::cin.read(reinterpret_cast(&len), sizeof(len));
buf.resize(len + 1);
std::cin.read(const_cast(buf.data()), len);
args = StringUtil::shell_split(buf);
}
if (args.empty() || args[0].empty()) {
return;
}
std::string command = args[0];
args.erase(args.begin());
if (pekwm::ascii_ncase_equal(command, "EXIT")) {
_stop = true;
} else if (pekwm::ascii_ncase_equal(command, "RELOAD")) {
reload();
} else if (pekwm::ascii_ncase_equal(command, "THEME")) {
handleTheme(StringView(buf, 0, 6));
_resources.notifyXTerms();
} else if (pekwm::ascii_ncase_equal(command, "TIMEOFDAY")) {
handleSetTimeOfDay(args);
} else if (pekwm::ascii_ncase_equal(command, "DPI")) {
handleSetDpi(args);
} else if (pekwm::ascii_ncase_equal(command, "MONLOAD")) {
handleMonLoad(args);
} else if (pekwm::ascii_ncase_equal(command, "MONSAVE")) {
handleMonSave(args);
} else if (pekwm::ascii_ncase_equal(command, "XSET")) {
handleSetXSETTING(args, XSETTING_TYPE_STRING);
} else if (pekwm::ascii_ncase_equal(command, "XSETCOLOR")) {
handleSetXSETTING(args, XSETTING_TYPE_COLOR);
} else if (pekwm::ascii_ncase_equal(command, "XSETINT")) {
handleSetXSETTING(args, XSETTING_TYPE_INTEGER);
} else if (pekwm::ascii_ncase_equal(command, "XSAVE")) {
handleXSave();
} else {
// unknown command
P_DBG("unknown command: " << command);
}
}
void
PekwmSys::handleMonitorChange()
{
if (_monitor_change.handle()) {
bool loaded = false;
if (_cfg.isMonitorLoadOnChange()) {
loaded = monLoad();
}
if (! loaded && _cfg.isMonitorAutoConfig()) {
monAutoConfig();
}
std::map args;
pekwm::hooks()->run(PEKWM_HOOK_ON_MONITOR_CHANGE, args);
}
}
void
PekwmSys::handleSetXSETTING(const std::vector &args,
enum XSettingType type)
{
if (args.size() != 2) {
P_TRACE("Sys XSet* expected 2 arguments, got " << args.size());
return;
}
bool updated;
switch (type) {
case XSETTING_TYPE_INTEGER:
updated = setXSettingInteger(args[0], args[1]);
break;
case XSETTING_TYPE_COLOR:
updated = setXSettingColor(args[0], args[1]);
break;
case XSETTING_TYPE_STRING:
updated = setXSettingString(args[0], args[1]);
break;
}
if (updated) {
_xsettings.updateServer();
}
}
bool
PekwmSys::setXSettingInteger(const std::string &key, const std::string &sval)
{
int val;
try {
val = std::stoi(sval);
} catch (std::invalid_argument&) {
return false;
}
_xsettings.setInt32(key, val);
return true;
}
static uint16_t
parseHex(const char *p)
{
char val[3] = {p[0], p[1], 0};
return static_cast(strtol(val, NULL, 16));
}
bool
PekwmSys::setXSettingColor(const std::string &key, const std::string &sval)
{
uint16_t r, g, b, a;
const char *p = sval.c_str();
if (*p != '#' || (sval.size() != 7 && sval.size() != 9)) {
return false;
}
// #RRGGBB(AA)
r = parseHex(p + 1) << 8;
g = parseHex(p + 3) << 8;
b = parseHex(p + 5) << 8;
if (sval.size() == 7) {
a = UINT16_MAX;
} else {
a = parseHex(p + 7) << 8;
}
_xsettings.setColor(key, r, g, b, a);
return true;
}
bool
PekwmSys::setXSettingString(const std::string &key, const std::string &sval)
{
_xsettings.setString(key, sval);
return true;
}
void
PekwmSys::handleXSave()
{
if (_cfg.getXSettingsPath().empty()) {
P_WARN("can not save XSETTINGS, path not set");
} else {
_xsettings.save(_cfg.getXSettingsPath());
}
}
bool
PekwmSys::handleSetTimeOfDay(const std::vector &args)
{
if (args.size() != 1) {
P_TRACE("Set TimeOfDay expected 1 argument, got "
<< args.size());
return false;
}
if (pekwm::ascii_ncase_equal(args[0], "AUTO")) {
_tod_override = static_cast(-1);
} else if (pekwm::ascii_ncase_equal(args[0], "TOGGLE")) {
// toggle between day and night
if (_tod == TIME_OF_DAY_DAY) {
_tod_override = TIME_OF_DAY_NIGHT;
} else {
_tod_override = TIME_OF_DAY_DAY;
}
} else if (pekwm::ascii_ncase_equal(args[0], "NEXT")) {
// go to next time of day including dawn and dusk
_tod_override = static_cast(_tod + 1);
if (_tod_override > TIME_OF_DAY_DUSK) {
_tod_override = TIME_OF_DAY_NIGHT;
}
} else if (! time_of_day_from_string(args[0], _tod_override)) {
return false;
}
_tod = timeOfDayChanged(getEffectiveTimeOfDay(_daytime.getTimeOfDay()));
return true;
}
void
PekwmSys::handleSetDpi(const std::vector &args)
{
if (args.size() != 1) {
P_TRACE("Set Dpi expected 1 argument, got " << args.size());
return;
}
double dpi;
try {
dpi = std::stod(args[0]);
} catch (std::invalid_argument&) {
P_LOG("Set Dpi " << args[0] << " is not a valid number");
return;
}
if (dpi > 0.0) {
_cfg.setDpiOverride(dpi);
_resources.setXResourceDpi();
setDpi();
_xsettings.updateServer();
P_TRACE("dpi override set to " << dpi);
} else {
P_LOG("Set Dpi " << dpi << " must be greater than 0.0");
}
}
void
PekwmSys::handleMonLoad(const std::vector &args)
{
monLoad();
}
void
PekwmSys::handleMonSave(const std::vector &args)
{
const std::string &path = _cfg.getMonitorsPath();
P_TRACE("save monitor configuration to " << path);
SysMonitorConfig config;
config.load(path);
SysMonitorConfig::MonitorsConfig monitors;
if (config.mk(monitors)) {
config.add(monitors);
config.save(path);
} else {
P_TRACE("failed to create configuration monitor configuration");
}
}
void
PekwmSys::handleTheme(const StringView &theme)
{
std::map x_resources;
std::string theme_dir = Util::getDir(theme.str());
CfgParser cfg(CfgParserOpt(""));
if (! theme.empty()
&& ThemeUtil::load(cfg, theme_dir, theme.str(), true)) {
SysConfig::parseConfigXResources(cfg.getEntryRoot(),
x_resources, "XRESOURCES");
}
_cfg.setThemeXResources(x_resources);
X11::loadXrmResources();
_resources.setConfiguredXResources(_tod);
X11::saveXrmResources();
}
void
PekwmSys::reload()
{
SysConfig old_cfg(_cfg);
if (! _cfg.parseConfig()) {
P_WARN("failed to parse configuration");
return;
}
if (old_cfg.isXSettingsEnabled() != _cfg.isXSettingsEnabled()) {
P_TRACE("XSETTINGS changed to " << _cfg.isXSettingsEnabled());
if (_cfg.isXSettingsEnabled()) {
_xsettings.setServerOwner();
} else {
_xsettings.clearServerOwner();
}
}
bool update_tod =
old_cfg.getLatitude() != _cfg.getLatitude()
|| old_cfg.getLongitude() != _cfg.getLongitude();
if (! old_cfg.isLocationLookup() && _cfg.isLocationLookup()) {
P_TRACE("location lookup changed to "
<< _cfg.isLocationLookup());
updateLocation();
update_tod = true;
}
if (old_cfg.getTimeOfDay() != _cfg.getTimeOfDay()) {
P_TRACE("time of day changed to " << _cfg.getTimeOfDay());
if (pekwm::ascii_ncase_equal(_cfg.getTimeOfDay(), "AUTO")) {
_tod_override = static_cast(-1);
update_tod = true;
} else if (time_of_day_from_string(_cfg.getTimeOfDay(),
_tod_override)) {
update_tod = true;
} else {
P_TRACE("invalid time of day " << _cfg.getTimeOfDay());
}
}
if (update_tod) {
_tod = updateDaytime(time(NULL));
}
TimeOfDay tod = getEffectiveTimeOfDay();
if (old_cfg.getNetTheme() != _cfg.getNetTheme()
|| old_cfg.getNetIconTheme() != _cfg.getNetIconTheme()) {
P_TRACE("NetTheme/NetIconTheme changed to "
<< _cfg.getNetTheme() << "/" << _cfg.getNetIconTheme());
setNetTheme(tod);
setNetIconTheme();
_xsettings.updateServer();
}
if (old_cfg.getXResources(tod) != _cfg.getXResources(tod)) {
P_TRACE("X resources for changed");
_resources.setConfiguredXResources(tod);
}
}
bool
PekwmSys::monLoad()
{
const std::string &path = _cfg.getMonitorsPath();
P_TRACE("apply monitor configuration from " << path);
SysMonitorConfig config;
SysMonitorConfig::MonitorsConfig monitors;
if (config.load(path) && config.find(monitors)) {
return config.apply(monitors);
}
return false;
}
bool
PekwmSys::monAutoConfig()
{
SysMonitorConfig config;
return config.autoConfig();
}
void
PekwmSys::updateLocation()
{
if (! _cfg.isLocationLookup()) {
P_TRACE("location lookup is disabled");
return;
}
Location location(mkHttpClient());
double latitude, longitude;
P_TRACE("get location from Location service");
if (location.get(latitude, longitude)) {
P_TRACE("got location latitude: " << latitude
<< " longitude: " << longitude);
_cfg.setLatitude(latitude);
_cfg.setLongitude(longitude);
_resources.setLocationCountry(location.getCountry());
_resources.setLocationCity(location.getCity());
}
}
TimeOfDay
PekwmSys::updateDaytime(time_t now)
{
TimeOfDay tod = TIME_OF_DAY_DAY;
time_t next = Calendar(now).nextDay().getTimestamp();
if (isTimeOfDayOverride()) {
tod = _tod_override;
} else if (_cfg.haveLocation()) {
_daytime =
Daytime(now, _cfg.getLatitude(), _cfg.getLongitude());
next = std::min(next, _daytime.getTimeOfDayEnd(now));
tod = _daytime.getTimeOfDay(now);
}
_timeouts.replaceTime(PEKWM_SYS_DAY_CHANGED, next);
return tod;
}
enum TimeOfDay
PekwmSys::timeOfDayChanged(enum TimeOfDay tod)
{
if (_tod == static_cast(-1)) {
P_LOG("initial time of day: " << time_of_day_to_string(tod));
} else if (_tod != tod) {
P_LOG("time of day changed from "
<< time_of_day_to_string(_tod) << " to "
<< time_of_day_to_string(tod));
} else {
P_TRACE("not updating time of day, not changed");
return tod;
}
_resources.update(_daytime, tod);
// automatic XSETTINGS theme switch
if (! _cfg.getNetTheme().empty()) {
setNetTheme(tod);
_xsettings.updateServer();
}
// daytime switch commands
OsEnv daytime_command_env;
std::string tod_str = time_of_day_to_string(tod);
Util::to_lower(tod_str);
daytime_command_env.override("PEKWM_SYS_TIMEOFDAY", tod_str);
const SysConfig::string_vector &commands = _cfg.getDaytimeCommands();
SysConfig::string_vector::const_iterator it(commands.begin());
for (; it != commands.end(); ++it) {
std::vector args = StringUtil::shell_split(*it);
_os->processExec(args, &daytime_command_env);
}
return tod;
}
#ifndef UNITTEST
static void
usage(int ret)
{
std::cout << "usage: " << progname << " [-dh]" << std::endl;
std::cout << " -d --display Display to connect to." << std::endl;
std::cout << " -f --log-file Set log file." << std::endl;
std::cout << " -h --help Show this info." << std::endl;
std::cout << " -l --log-level Set log level." << std::endl;
std::cout << " -t --theme Path to theme." << std::endl;
exit(ret);
}
int
main(int argc, char *argv[])
{
pledge_x11_required("");
progname = argv[0];
const char *display = NULL;
std::string theme;
std::string config_file = Util::getEnv("PEKWM_CONFIG_FILE");
bool interactive = false;
static struct option opts[] = {
{const_cast("display"), required_argument, nullptr, 'd'},
{const_cast("help"), no_argument, nullptr, 'h'},
{const_cast("log-level"), required_argument, nullptr,
'l'},
{const_cast("log-file"), required_argument, nullptr,
'f'},
{const_cast("theme"), required_argument, nullptr,
't'},
{const_cast("interactive"), no_argument, nullptr, 'i'},
{nullptr, 0, nullptr, 0}
};
int ch;
while ((ch = getopt_long(argc, argv, "c:d:h:il:f:t:", opts, nullptr))
!= -1) {
switch (ch) {
case 'c':
config_file = optarg;
break;
case 'd':
display = optarg;
break;
case 'h':
usage(0);
break;
case 'f':
if (! Debug::setLogFile(optarg)) {
std::cerr << "Failed to open log file "
<< optarg << std::endl;
}
break;
case 'l':
Debug::setLevel(Debug::getLevel(optarg));
break;
case 't':
theme = optarg;
break;
case 'i':
interactive = true;
break;
default:
usage(1);
break;
}
}
if (! X11::init(display, std::cerr)) {
return 1;
}
struct sigaction act;
act.sa_handler = sigHandler;
act.sa_mask = sigset_t();
act.sa_flags = SA_NOCLDSTOP | SA_NODEFER;
sigaction(SIGCHLD, &act, 0);
if (config_file.empty()) {
config_file = Util::getConfigDir() + "/config";
}
Util::expandFileName(config_file);
Destruct os(mkOs());
_hooks = new Hooks(*os);
_hooks->load(config_file);
Destruct hooks(_hooks);
PekwmSys sys(config_file, interactive, *os);
return sys.main(theme);
}
#endif // UNITTEST
pekwm-0.4.4/src/sys/SysResources.cc 0000664 0001750 0001750 00000014665 15126136025 012727 //
// SysResources.cc for pekwm
// Copyright (C) 2025 Claes Nästén
//
// This program is licensed under the GNU GPL.
// See the LICENSE file for more information.
//
#include "Calendar.hh"
#include "Debug.hh"
#include "SysResources.hh"
#include "X11.hh"
struct osc_xresource {
int code1;
int code2;
const char *name;
};
static struct osc_xresource _osc_to_resource[] = {
{ 4, 0, "XTerm*color0" },
{ 4, 1, "XTerm*color1" },
{ 4, 2, "XTerm*color2" },
{ 4, 3, "XTerm*color3" },
{ 4, 4, "XTerm*color4" },
{ 4, 5, "XTerm*color5" },
{ 4, 6, "XTerm*color6" },
{ 4, 7, "XTerm*color7" },
{ 4, 8, "XTerm*color8" },
{ 4, 9, "XTerm*color9" },
{ 4, 10, "XTerm*color10" },
{ 4, 11, "XTerm*color11" },
{ 4, 12, "XTerm*color12" },
{ 4, 13, "XTerm*color13" },
{ 4, 14, "XTerm*color14" },
{ 4, 15, "XTerm*color15" },
{ 10, -1, "XTerm*foreground" },
{ 11, -1, "XTerm*background" },
{ -1, -1, nullptr }
};
SysResources::SysResources(const SysConfig &cfg)
: _cfg(cfg),
_xterm_hash(0)
{
}
SysResources::~SysResources()
{
}
void
SysResources::update(const Daytime &daytime, TimeOfDay tod)
{
const char *daylight;
const char *theme_variant;
switch (tod) {
case TIME_OF_DAY_DAWN:
daylight = "dawn";
theme_variant = "dark";
break;
case TIME_OF_DAY_DUSK:
daylight = "dusk";
theme_variant = "dark";
break;
case TIME_OF_DAY_NIGHT:
daylight = "night";
theme_variant = "dark";
break;
case TIME_OF_DAY_DAY:
default:
daylight = "day";
theme_variant = "light";
break;
};
setXAtoms(theme_variant);
setXResources(daytime, tod, daylight, theme_variant);
notifyXTerms();
X11::flush();
}
void
SysResources::setXAtoms(const char *theme_variant)
{
X11::setString(X11::getRoot(), PEKWM_THEME_VARIANT, theme_variant);
}
void
SysResources::setXResources(const Daytime &daytime, TimeOfDay tod,
const char *daylight, const char *theme_variant)
{
X11::loadXrmResources();
if (_cfg.haveDpi()) {
X11::setXrmString("Xft.dpi",
pekwm::to_string(_cfg.getDpi(), 2));
}
X11::setXrmString("pekwm.daylight", daylight);
X11::setXrmString("pekwm.theme.variant", theme_variant);
if (_cfg.haveLocation()) {
X11::setXrmString("pekwm.location.latitude",
std::to_string(_cfg.getLatitude()));
X11::setXrmString("pekwm.location.longitude",
std::to_string(_cfg.getLongitude()));
X11::setXrmString("pekwm.location.country", _location_country);
X11::setXrmString("pekwm.location.city", _location_city);
}
if (daytime.isValid()) {
X11::setXrmString("pekwm.location.sunrise",
Calendar(daytime.getSunRise()).toString());
X11::setXrmString("pekwm.location.sunset",
Calendar(daytime.getSunSet()).toString());
X11::setXrmString("pekwm.location.dawn",
Calendar(daytime.getDawn()).toString());
X11::setXrmString("pekwm.location.night",
Calendar(daytime.getNight()).toString());
}
setConfiguredXResources(tod);
X11::saveXrmResources();
}
void
SysResources::setXResourceDpi()
{
if (! _cfg.haveDpi()) {
return;
}
X11::loadXrmResources();
X11::setXrmString("Xft.dpi", pekwm::to_string(_cfg.getDpi(), 2));
X11::saveXrmResources();
}
void
SysResources::setConfiguredXResources(TimeOfDay tod)
{
removeStaleThemeXresources();
setXResourcesMap(_cfg.getXResources(tod), "configuration");
setXResourcesMap(_cfg.getThemeXResources(), "theme");
_theme_x_resources = _cfg.getThemeXResources();
}
void
SysResources::setXResourcesMap(const SysConfig::string_map &x_resources,
const char *ctx)
{
SysConfig::string_map::const_iterator it(x_resources.begin());
for (; it != x_resources.end(); ++it) {
X11::setXrmString(it->first, it->second);
}
P_TRACE("set " << x_resources.size() << " X resources from " << ctx);
}
void
SysResources::removeStaleThemeXresources()
{
const SysConfig::string_map &theme_x_resources =
_cfg.getThemeXResources();
std::string val;
SysConfig::string_map::iterator old_it(_theme_x_resources.begin());
std::vector del_names;
for (; old_it != _theme_x_resources.end(); ++old_it) {
SysConfig::string_map::const_iterator new_it =
theme_x_resources.find(old_it->first);
// If the resource no longer exists and still has its original
// value, remove it from the resources.
if (new_it == theme_x_resources.end()
&& X11::getXrmString(old_it->first, val)
&& val == old_it->second) {
del_names.push_back(old_it->first);
}
}
X11::xrmDeleteResources(del_names);
}
void
SysResources::notifyXTerms()
{
// Avoid sending messages to all clients if no relevant Xrm resource
// has changed since last run.
uint xterm_hash = calcXTermHash();
if (xterm_hash == _xterm_hash) {
return;
}
std::vector windows;
readClientList(windows);
P_TRACE("checking " << windows.size() << " windows for XTerm clients");
std::vector::iterator it(windows.begin());
for (; it != windows.end(); ++it) {
X11::ClassHint class_hint;
if (X11::getClassHint(*it, class_hint)
&& strcmp("XTerm", class_hint.getClass()) == 0) {
notifyXTerm(*it);
}
}
}
void
SysResources::notifyXTerm(Window win)
{
P_TRACE("notify XTerm " << win << " using XTERM_CONTROL");
XEvent ev = {};
ev.type = ev.xclient.type = ClientMessage;
ev.xclient.serial = 0;
ev.xclient.send_event = True;
ev.xclient.message_type = X11::getAtom(XTERM_CONTROL);
ev.xclient.window = win;
ev.xclient.format = 8;
for (int i = 0; _osc_to_resource[i].name; i++) {
std::string value;
if (! X11::getXrmString(_osc_to_resource[i].name, value)) {
continue;
}
if (_osc_to_resource[i].code2 == -1) {
snprintf(ev.xclient.data.b, sizeof(ev.xclient.data.b),
"%d;%s", _osc_to_resource[i].code1,
value.c_str());
} else {
snprintf(ev.xclient.data.b, sizeof(ev.xclient.data.b),
"%d;%d;%s", _osc_to_resource[i].code1,
_osc_to_resource[i].code2, value.c_str());
}
X11::sendEvent(win, False, 0, &ev);
}
}
bool
SysResources::readClientList(std::vector &windowsv)
{
ulong actual;
Window *windows;
if (! X11::getProperty(X11::getRoot(),
X11::getAtom(PEKWM_CLIENT_LIST), XA_WINDOW, 0,
reinterpret_cast(&windows), &actual)) {
return false;
}
windowsv.clear();
for (ulong i = 0; i < actual; i++) {
windowsv.push_back(windows[i]);
}
X11::free(windows);
return true;
}
uint
SysResources::calcXTermHash()
{
std::string buf;
for (int i = 0; _osc_to_resource[i].name; i++) {
buf += std::to_string(i);
std::string value;
if (! X11::getXrmString(_osc_to_resource[i].name, value)) {
continue;
}
buf += value;
}
return pekwm::str_hash(buf);
}
pekwm-0.4.4/src/sys/Makefile.am 0000664 0001750 0001750 00000000767 15126136025 012001 bin_PROGRAMS = pekwm_sys
pekwm_sys_SOURCES = pekwm_sys.cc pekwm_sys.hh \
SysConfig.cc SysConfig.hh \
SysMonitorChange.cc SysMonitorChange.hh \
SysMonitorConfig.cc SysMonitorConfig.hh \
SysResources.cc SysResources.hh \
XSettings.cc XSettings.hh
pekwm_sys_CXXFLAGS = $(LIB_CFLAGS) $(libcurl_CFLAGS) $(libudev_CFLAGS) \
-I../lib
pekwm_sys_LDADD = ../lib/libpekwm_lib.a ../tk/libpekwm_tk.a $(LIB_LIBS) \
$(libcurl_LIBS) $(libudev_LIBS)
EXTRA_DIST = CMakeLists.txt
pekwm-0.4.4/src/sys/Makefile.in 0000664 0001750 0001750 00000102505 15164641454 012014 # Makefile.in generated by automake 1.17 from Makefile.am.
# @configure_input@
# Copyright (C) 1994-2024 Free Software Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.
@SET_MAKE@
VPATH = @srcdir@
am__is_gnu_make = { \
if test -z '$(MAKELEVEL)'; then \
false; \
elif test -n '$(MAKE_HOST)'; then \
true; \
elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
true; \
else \
false; \
fi; \
}
am__make_running_with_option = \
case $${target_option-} in \
?) ;; \
*) echo "am__make_running_with_option: internal error: invalid" \
"target option '$${target_option-}' specified" >&2; \
exit 1;; \
esac; \
has_opt=no; \
sane_makeflags=$$MAKEFLAGS; \
if $(am__is_gnu_make); then \
sane_makeflags=$$MFLAGS; \
else \
case $$MAKEFLAGS in \
*\\[\ \ ]*) \
bs=\\; \
sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
| sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \
esac; \
fi; \
skip_next=no; \
strip_trailopt () \
{ \
flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
}; \
for flg in $$sane_makeflags; do \
test $$skip_next = yes && { skip_next=no; continue; }; \
case $$flg in \
*=*|--*) continue;; \
-*I) strip_trailopt 'I'; skip_next=yes;; \
-*I?*) strip_trailopt 'I';; \
-*O) strip_trailopt 'O'; skip_next=yes;; \
-*O?*) strip_trailopt 'O';; \
-*l) strip_trailopt 'l'; skip_next=yes;; \
-*l?*) strip_trailopt 'l';; \
-[dEDm]) skip_next=yes;; \
-[JT]) skip_next=yes;; \
esac; \
case $$flg in \
*$$target_option*) has_opt=yes; break;; \
esac; \
done; \
test $$has_opt = yes
am__make_dryrun = (target_option=n; $(am__make_running_with_option))
am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
am__rm_f = rm -f $(am__rm_f_notfound)
am__rm_rf = rm -rf $(am__rm_f_notfound)
pkgdatadir = $(datadir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
pkglibexecdir = $(libexecdir)/@PACKAGE@
am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
install_sh_DATA = $(install_sh) -c -m 644
install_sh_PROGRAM = $(install_sh) -c
install_sh_SCRIPT = $(install_sh) -c
INSTALL_HEADER = $(INSTALL_DATA)
transform = $(program_transform_name)
NORMAL_INSTALL = :
PRE_INSTALL = :
POST_INSTALL = :
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
build_triplet = @build@
host_triplet = @host@
target_triplet = @target@
bin_PROGRAMS = pekwm_sys$(EXEEXT)
subdir = src/sys
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
DIST_COMMON = $(srcdir)/Makefile.am $(am__DIST_COMMON)
mkinstalldirs = $(install_sh) -d
CONFIG_HEADER = $(top_builddir)/config.h
CONFIG_CLEAN_FILES =
CONFIG_CLEAN_VPATH_FILES =
am__installdirs = "$(DESTDIR)$(bindir)"
PROGRAMS = $(bin_PROGRAMS)
am_pekwm_sys_OBJECTS = pekwm_sys-pekwm_sys.$(OBJEXT) \
pekwm_sys-SysConfig.$(OBJEXT) \
pekwm_sys-SysMonitorChange.$(OBJEXT) \
pekwm_sys-SysMonitorConfig.$(OBJEXT) \
pekwm_sys-SysResources.$(OBJEXT) pekwm_sys-XSettings.$(OBJEXT)
pekwm_sys_OBJECTS = $(am_pekwm_sys_OBJECTS)
am__DEPENDENCIES_1 =
pekwm_sys_DEPENDENCIES = ../lib/libpekwm_lib.a ../tk/libpekwm_tk.a \
$(am__DEPENDENCIES_1) $(am__DEPENDENCIES_1) \
$(am__DEPENDENCIES_1)
pekwm_sys_LINK = $(CXXLD) $(pekwm_sys_CXXFLAGS) $(CXXFLAGS) \
$(AM_LDFLAGS) $(LDFLAGS) -o $@
AM_V_P = $(am__v_P_@AM_V@)
am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
am__v_P_0 = false
am__v_P_1 = :
AM_V_GEN = $(am__v_GEN_@AM_V@)
am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
am__v_GEN_0 = @echo " GEN " $@;
am__v_GEN_1 =
AM_V_at = $(am__v_at_@AM_V@)
am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
am__v_at_0 = @
am__v_at_1 =
DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)
depcomp = $(SHELL) $(top_srcdir)/depcomp
am__maybe_remake_depfiles = depfiles
am__depfiles_remade = ./$(DEPDIR)/pekwm_sys-SysConfig.Po \
./$(DEPDIR)/pekwm_sys-SysMonitorChange.Po \
./$(DEPDIR)/pekwm_sys-SysMonitorConfig.Po \
./$(DEPDIR)/pekwm_sys-SysResources.Po \
./$(DEPDIR)/pekwm_sys-XSettings.Po \
./$(DEPDIR)/pekwm_sys-pekwm_sys.Po
am__mv = mv -f
AM_V_lt = $(am__v_lt_@AM_V@)
am__v_lt_ = $(am__v_lt_@AM_DEFAULT_V@)
am__v_lt_0 = --silent
am__v_lt_1 =
CXXCOMPILE = $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \
$(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS)
AM_V_CXX = $(am__v_CXX_@AM_V@)
am__v_CXX_ = $(am__v_CXX_@AM_DEFAULT_V@)
am__v_CXX_0 = @echo " CXX " $@;
am__v_CXX_1 =
CXXLD = $(CXX)
CXXLINK = $(CXXLD) $(AM_CXXFLAGS) $(CXXFLAGS) $(AM_LDFLAGS) $(LDFLAGS) \
-o $@
AM_V_CXXLD = $(am__v_CXXLD_@AM_V@)
am__v_CXXLD_ = $(am__v_CXXLD_@AM_DEFAULT_V@)
am__v_CXXLD_0 = @echo " CXXLD " $@;
am__v_CXXLD_1 =
COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
AM_V_CC = $(am__v_CC_@AM_V@)
am__v_CC_ = $(am__v_CC_@AM_DEFAULT_V@)
am__v_CC_0 = @echo " CC " $@;
am__v_CC_1 =
CCLD = $(CC)
LINK = $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) $(LDFLAGS) -o $@
AM_V_CCLD = $(am__v_CCLD_@AM_V@)
am__v_CCLD_ = $(am__v_CCLD_@AM_DEFAULT_V@)
am__v_CCLD_0 = @echo " CCLD " $@;
am__v_CCLD_1 =
SOURCES = $(pekwm_sys_SOURCES)
DIST_SOURCES = $(pekwm_sys_SOURCES)
am__can_run_installinfo = \
case $$AM_UPDATE_INFO_DIR in \
n|no|NO) false;; \
*) (install-info --version) >/dev/null 2>&1;; \
esac
am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
# Read a list of newline-separated strings from the standard input,
# and print each of them once, without duplicates. Input order is
# *not* preserved.
am__uniquify_input = $(AWK) '\
BEGIN { nonempty = 0; } \
{ items[$$0] = 1; nonempty = 1; } \
END { if (nonempty) { for (i in items) print i; }; } \
'
# Make sure the list of sources is unique. This is necessary because,
# e.g., the same source file might be shared among _SOURCES variables
# for different programs/libraries.
am__define_uniq_tagged_files = \
list='$(am__tagged_files)'; \
unique=`for i in $$list; do \
if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
done | $(am__uniquify_input)`
am__DIST_COMMON = $(srcdir)/Makefile.in $(top_srcdir)/depcomp
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
ACLOCAL = @ACLOCAL@
AMTAR = @AMTAR@
AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
AUTOCONF = @AUTOCONF@
AUTOHEADER = @AUTOHEADER@
AUTOMAKE = @AUTOMAKE@
AWK = @AWK@
CC = @CC@
CCDEPMODE = @CCDEPMODE@
CFLAGS = @CFLAGS@
CPP = @CPP@
CPPFLAGS = @CPPFLAGS@
CSCOPE = @CSCOPE@
CTAGS = @CTAGS@
CXX = @CXX@
CXXDEPMODE = @CXXDEPMODE@
CXXFLAGS = @CXXFLAGS@
CYGPATH_W = @CYGPATH_W@
DEFS = @DEFS@
DEPDIR = @DEPDIR@
ECHO_C = @ECHO_C@
ECHO_N = @ECHO_N@
ECHO_T = @ECHO_T@
ETAGS = @ETAGS@
EXEEXT = @EXEEXT@
GREP = @GREP@
INSTALL = @INSTALL@
INSTALL_DATA = @INSTALL_DATA@
INSTALL_PROGRAM = @INSTALL_PROGRAM@
INSTALL_SCRIPT = @INSTALL_SCRIPT@
INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
LDFLAGS = @LDFLAGS@
LIBOBJS = @LIBOBJS@
LIBS = @LIBS@
LIB_CFLAGS = @LIB_CFLAGS@
LIB_LIBS = @LIB_LIBS@
LTLIBOBJS = @LTLIBOBJS@
MAKEINFO = @MAKEINFO@
MKDIR_P = @MKDIR_P@
OBJEXT = @OBJEXT@
PACKAGE = @PACKAGE@
PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
PACKAGE_NAME = @PACKAGE_NAME@
PACKAGE_STRING = @PACKAGE_STRING@
PACKAGE_TARNAME = @PACKAGE_TARNAME@
PACKAGE_URL = @PACKAGE_URL@
PACKAGE_VERSION = @PACKAGE_VERSION@
PATH_SEPARATOR = @PATH_SEPARATOR@
PEKWM_FEATURES = @PEKWM_FEATURES@
PEKWM_SH = @PEKWM_SH@
PEKWM_THEMES = @PEKWM_THEMES@
PKG_CONFIG = @PKG_CONFIG@
PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@
PKG_CONFIG_PATH = @PKG_CONFIG_PATH@
RANLIB = @RANLIB@
SED = @SED@
SET_MAKE = @SET_MAKE@
SHELL = @SHELL@
STRIP = @STRIP@
TK_CFLAGS = @TK_CFLAGS@
TK_LIBS = @TK_LIBS@
VERSION = @VERSION@
XMKMF = @XMKMF@
X_CFLAGS = @X_CFLAGS@
X_EXTRA_LIBS = @X_EXTRA_LIBS@
X_LIBS = @X_LIBS@
X_PRE_LIBS = @X_PRE_LIBS@
abs_builddir = @abs_builddir@
abs_srcdir = @abs_srcdir@
abs_top_builddir = @abs_top_builddir@
abs_top_srcdir = @abs_top_srcdir@
ac_ct_CC = @ac_ct_CC@
ac_ct_CXX = @ac_ct_CXX@
am__include = @am__include@
am__leading_dot = @am__leading_dot@
am__quote = @am__quote@
am__rm_f_notfound = @am__rm_f_notfound@
am__tar = @am__tar@
am__untar = @am__untar@
am__xargs_n = @am__xargs_n@
bindir = @bindir@
build = @build@
build_alias = @build_alias@
build_cpu = @build_cpu@
build_os = @build_os@
build_vendor = @build_vendor@
builddir = @builddir@
datadir = @datadir@
datarootdir = @datarootdir@
docdir = @docdir@
dvidir = @dvidir@
exec_prefix = @exec_prefix@
host = @host@
host_alias = @host_alias@
host_cpu = @host_cpu@
host_os = @host_os@
host_vendor = @host_vendor@
htmldir = @htmldir@
includedir = @includedir@
infodir = @infodir@
install_sh = @install_sh@
libcurl_CFLAGS = @libcurl_CFLAGS@
libcurl_LIBS = @libcurl_LIBS@
libdir = @libdir@
libexecdir = @libexecdir@
libjpeg_CFLAGS = @libjpeg_CFLAGS@
libjpeg_LIBS = @libjpeg_LIBS@
libpng_CFLAGS = @libpng_CFLAGS@
libpng_LIBS = @libpng_LIBS@
libudev_CFLAGS = @libudev_CFLAGS@
libudev_LIBS = @libudev_LIBS@
localedir = @localedir@
localstatedir = @localstatedir@
mandir = @mandir@
mkdir_p = @mkdir_p@
oldincludedir = @oldincludedir@
pango_CFLAGS = @pango_CFLAGS@
pango_LIBS = @pango_LIBS@
pangocairo_CFLAGS = @pangocairo_CFLAGS@
pangocairo_LIBS = @pangocairo_LIBS@
pangoxft_CFLAGS = @pangoxft_CFLAGS@
pangoxft_LIBS = @pangoxft_LIBS@
pdfdir = @pdfdir@
prefix = @prefix@
program_transform_name = @program_transform_name@
psdir = @psdir@
runstatedir = @runstatedir@
sbindir = @sbindir@
sharedstatedir = @sharedstatedir@
srcdir = @srcdir@
sysconfdir = @sysconfdir@
target = @target@
target_alias = @target_alias@
target_cpu = @target_cpu@
target_os = @target_os@
target_vendor = @target_vendor@
top_build_prefix = @top_build_prefix@
top_builddir = @top_builddir@
top_srcdir = @top_srcdir@
xext_CFLAGS = @xext_CFLAGS@
xext_LIBS = @xext_LIBS@
xft_CFLAGS = @xft_CFLAGS@
xft_LIBS = @xft_LIBS@
xinerama_CFLAGS = @xinerama_CFLAGS@
xinerama_LIBS = @xinerama_LIBS@
xpm_CFLAGS = @xpm_CFLAGS@
xpm_LIBS = @xpm_LIBS@
xrandr_CFLAGS = @xrandr_CFLAGS@
xrandr_LIBS = @xrandr_LIBS@
pekwm_sys_SOURCES = pekwm_sys.cc pekwm_sys.hh \
SysConfig.cc SysConfig.hh \
SysMonitorChange.cc SysMonitorChange.hh \
SysMonitorConfig.cc SysMonitorConfig.hh \
SysResources.cc SysResources.hh \
XSettings.cc XSettings.hh
pekwm_sys_CXXFLAGS = $(LIB_CFLAGS) $(libcurl_CFLAGS) $(libudev_CFLAGS) \
-I../lib
pekwm_sys_LDADD = ../lib/libpekwm_lib.a ../tk/libpekwm_tk.a $(LIB_LIBS) \
$(libcurl_LIBS) $(libudev_LIBS)
EXTRA_DIST = CMakeLists.txt
all: all-am
.SUFFIXES:
.SUFFIXES: .cc .o .obj
$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps)
@for dep in $?; do \
case '$(am__configure_deps)' in \
*$$dep*) \
( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
&& { if test -f $@; then exit 0; else break; fi; }; \
exit 1;; \
esac; \
done; \
echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign src/sys/Makefile'; \
$(am__cd) $(top_srcdir) && \
$(AUTOMAKE) --foreign src/sys/Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
@case '$?' in \
*config.status*) \
cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
*) \
echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__maybe_remake_depfiles)'; \
cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__maybe_remake_depfiles);; \
esac;
$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(top_srcdir)/configure: $(am__configure_deps)
cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(ACLOCAL_M4): $(am__aclocal_m4_deps)
cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(am__aclocal_m4_deps):
install-binPROGRAMS: $(bin_PROGRAMS)
@$(NORMAL_INSTALL)
@list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \
if test -n "$$list"; then \
echo " $(MKDIR_P) '$(DESTDIR)$(bindir)'"; \
$(MKDIR_P) "$(DESTDIR)$(bindir)" || exit 1; \
fi; \
for p in $$list; do echo "$$p $$p"; done | \
sed 's/$(EXEEXT)$$//' | \
while read p p1; do if test -f $$p \
; then echo "$$p"; echo "$$p"; else :; fi; \
done | \
sed -e 'p;s,.*/,,;n;h' \
-e 's|.*|.|' \
-e 'p;x;s,.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/' | \
sed 'N;N;N;s,\n, ,g' | \
$(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1 } \
{ d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \
if ($$2 == $$4) files[d] = files[d] " " $$1; \
else { print "f", $$3 "/" $$4, $$1; } } \
END { for (d in files) print "f", d, files[d] }' | \
while read type dir files; do \
if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \
test -z "$$files" || { \
echo " $(INSTALL_PROGRAM_ENV) $(INSTALL_PROGRAM) $$files '$(DESTDIR)$(bindir)$$dir'"; \
$(INSTALL_PROGRAM_ENV) $(INSTALL_PROGRAM) $$files "$(DESTDIR)$(bindir)$$dir" || exit $$?; \
} \
; done
uninstall-binPROGRAMS:
@$(NORMAL_UNINSTALL)
@list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \
files=`for p in $$list; do echo "$$p"; done | \
sed -e 'h;s,^.*/,,;s/$(EXEEXT)$$//;$(transform)' \
-e 's/$$/$(EXEEXT)/' \
`; \
test -n "$$list" || exit 0; \
echo " ( cd '$(DESTDIR)$(bindir)' && rm -f" $$files ")"; \
cd "$(DESTDIR)$(bindir)" && $(am__rm_f) $$files
clean-binPROGRAMS:
-$(am__rm_f) $(bin_PROGRAMS)
pekwm_sys$(EXEEXT): $(pekwm_sys_OBJECTS) $(pekwm_sys_DEPENDENCIES) $(EXTRA_pekwm_sys_DEPENDENCIES)
@rm -f pekwm_sys$(EXEEXT)
$(AM_V_CXXLD)$(pekwm_sys_LINK) $(pekwm_sys_OBJECTS) $(pekwm_sys_LDADD) $(LIBS)
mostlyclean-compile:
-rm -f *.$(OBJEXT)
distclean-compile:
-rm -f *.tab.c
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/pekwm_sys-SysConfig.Po@am__quote@ # am--include-marker
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/pekwm_sys-SysMonitorChange.Po@am__quote@ # am--include-marker
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/pekwm_sys-SysMonitorConfig.Po@am__quote@ # am--include-marker
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/pekwm_sys-SysResources.Po@am__quote@ # am--include-marker
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/pekwm_sys-XSettings.Po@am__quote@ # am--include-marker
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/pekwm_sys-pekwm_sys.Po@am__quote@ # am--include-marker
$(am__depfiles_remade):
@$(MKDIR_P) $(@D)
@: >>$@
am--depfiles: $(am__depfiles_remade)
.cc.o:
@am__fastdepCXX_TRUE@ $(AM_V_CXX)depbase=`echo $@ | sed 's|[^/]*$$|$(DEPDIR)/&|;s|\.o$$||'`;\
@am__fastdepCXX_TRUE@ $(CXXCOMPILE) -MT $@ -MD -MP -MF $$depbase.Tpo -c -o $@ $< &&\
@am__fastdepCXX_TRUE@ $(am__mv) $$depbase.Tpo $$depbase.Po
@AMDEP_TRUE@@am__fastdepCXX_FALSE@ $(AM_V_CXX)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
@am__fastdepCXX_FALSE@ $(AM_V_CXX@am__nodep@)$(CXXCOMPILE) -c -o $@ $<
.cc.obj:
@am__fastdepCXX_TRUE@ $(AM_V_CXX)depbase=`echo $@ | sed 's|[^/]*$$|$(DEPDIR)/&|;s|\.obj$$||'`;\
@am__fastdepCXX_TRUE@ $(CXXCOMPILE) -MT $@ -MD -MP -MF $$depbase.Tpo -c -o $@ `$(CYGPATH_W) '$<'` &&\
@am__fastdepCXX_TRUE@ $(am__mv) $$depbase.Tpo $$depbase.Po
@AMDEP_TRUE@@am__fastdepCXX_FALSE@ $(AM_V_CXX)source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
@am__fastdepCXX_FALSE@ $(AM_V_CXX@am__nodep@)$(CXXCOMPILE) -c -o $@ `$(CYGPATH_W) '$<'`
pekwm_sys-pekwm_sys.o: pekwm_sys.cc
@am__fastdepCXX_TRUE@ $(AM_V_CXX)$(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(pekwm_sys_CXXFLAGS) $(CXXFLAGS) -MT pekwm_sys-pekwm_sys.o -MD -MP -MF $(DEPDIR)/pekwm_sys-pekwm_sys.Tpo -c -o pekwm_sys-pekwm_sys.o `test -f 'pekwm_sys.cc' || echo '$(srcdir)/'`pekwm_sys.cc
@am__fastdepCXX_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/pekwm_sys-pekwm_sys.Tpo $(DEPDIR)/pekwm_sys-pekwm_sys.Po
@AMDEP_TRUE@@am__fastdepCXX_FALSE@ $(AM_V_CXX)source='pekwm_sys.cc' object='pekwm_sys-pekwm_sys.o' libtool=no @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
@am__fastdepCXX_FALSE@ $(AM_V_CXX@am__nodep@)$(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(pekwm_sys_CXXFLAGS) $(CXXFLAGS) -c -o pekwm_sys-pekwm_sys.o `test -f 'pekwm_sys.cc' || echo '$(srcdir)/'`pekwm_sys.cc
pekwm_sys-pekwm_sys.obj: pekwm_sys.cc
@am__fastdepCXX_TRUE@ $(AM_V_CXX)$(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(pekwm_sys_CXXFLAGS) $(CXXFLAGS) -MT pekwm_sys-pekwm_sys.obj -MD -MP -MF $(DEPDIR)/pekwm_sys-pekwm_sys.Tpo -c -o pekwm_sys-pekwm_sys.obj `if test -f 'pekwm_sys.cc'; then $(CYGPATH_W) 'pekwm_sys.cc'; else $(CYGPATH_W) '$(srcdir)/pekwm_sys.cc'; fi`
@am__fastdepCXX_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/pekwm_sys-pekwm_sys.Tpo $(DEPDIR)/pekwm_sys-pekwm_sys.Po
@AMDEP_TRUE@@am__fastdepCXX_FALSE@ $(AM_V_CXX)source='pekwm_sys.cc' object='pekwm_sys-pekwm_sys.obj' libtool=no @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
@am__fastdepCXX_FALSE@ $(AM_V_CXX@am__nodep@)$(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(pekwm_sys_CXXFLAGS) $(CXXFLAGS) -c -o pekwm_sys-pekwm_sys.obj `if test -f 'pekwm_sys.cc'; then $(CYGPATH_W) 'pekwm_sys.cc'; else $(CYGPATH_W) '$(srcdir)/pekwm_sys.cc'; fi`
pekwm_sys-SysConfig.o: SysConfig.cc
@am__fastdepCXX_TRUE@ $(AM_V_CXX)$(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(pekwm_sys_CXXFLAGS) $(CXXFLAGS) -MT pekwm_sys-SysConfig.o -MD -MP -MF $(DEPDIR)/pekwm_sys-SysConfig.Tpo -c -o pekwm_sys-SysConfig.o `test -f 'SysConfig.cc' || echo '$(srcdir)/'`SysConfig.cc
@am__fastdepCXX_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/pekwm_sys-SysConfig.Tpo $(DEPDIR)/pekwm_sys-SysConfig.Po
@AMDEP_TRUE@@am__fastdepCXX_FALSE@ $(AM_V_CXX)source='SysConfig.cc' object='pekwm_sys-SysConfig.o' libtool=no @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
@am__fastdepCXX_FALSE@ $(AM_V_CXX@am__nodep@)$(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(pekwm_sys_CXXFLAGS) $(CXXFLAGS) -c -o pekwm_sys-SysConfig.o `test -f 'SysConfig.cc' || echo '$(srcdir)/'`SysConfig.cc
pekwm_sys-SysConfig.obj: SysConfig.cc
@am__fastdepCXX_TRUE@ $(AM_V_CXX)$(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(pekwm_sys_CXXFLAGS) $(CXXFLAGS) -MT pekwm_sys-SysConfig.obj -MD -MP -MF $(DEPDIR)/pekwm_sys-SysConfig.Tpo -c -o pekwm_sys-SysConfig.obj `if test -f 'SysConfig.cc'; then $(CYGPATH_W) 'SysConfig.cc'; else $(CYGPATH_W) '$(srcdir)/SysConfig.cc'; fi`
@am__fastdepCXX_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/pekwm_sys-SysConfig.Tpo $(DEPDIR)/pekwm_sys-SysConfig.Po
@AMDEP_TRUE@@am__fastdepCXX_FALSE@ $(AM_V_CXX)source='SysConfig.cc' object='pekwm_sys-SysConfig.obj' libtool=no @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
@am__fastdepCXX_FALSE@ $(AM_V_CXX@am__nodep@)$(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(pekwm_sys_CXXFLAGS) $(CXXFLAGS) -c -o pekwm_sys-SysConfig.obj `if test -f 'SysConfig.cc'; then $(CYGPATH_W) 'SysConfig.cc'; else $(CYGPATH_W) '$(srcdir)/SysConfig.cc'; fi`
pekwm_sys-SysMonitorChange.o: SysMonitorChange.cc
@am__fastdepCXX_TRUE@ $(AM_V_CXX)$(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(pekwm_sys_CXXFLAGS) $(CXXFLAGS) -MT pekwm_sys-SysMonitorChange.o -MD -MP -MF $(DEPDIR)/pekwm_sys-SysMonitorChange.Tpo -c -o pekwm_sys-SysMonitorChange.o `test -f 'SysMonitorChange.cc' || echo '$(srcdir)/'`SysMonitorChange.cc
@am__fastdepCXX_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/pekwm_sys-SysMonitorChange.Tpo $(DEPDIR)/pekwm_sys-SysMonitorChange.Po
@AMDEP_TRUE@@am__fastdepCXX_FALSE@ $(AM_V_CXX)source='SysMonitorChange.cc' object='pekwm_sys-SysMonitorChange.o' libtool=no @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
@am__fastdepCXX_FALSE@ $(AM_V_CXX@am__nodep@)$(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(pekwm_sys_CXXFLAGS) $(CXXFLAGS) -c -o pekwm_sys-SysMonitorChange.o `test -f 'SysMonitorChange.cc' || echo '$(srcdir)/'`SysMonitorChange.cc
pekwm_sys-SysMonitorChange.obj: SysMonitorChange.cc
@am__fastdepCXX_TRUE@ $(AM_V_CXX)$(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(pekwm_sys_CXXFLAGS) $(CXXFLAGS) -MT pekwm_sys-SysMonitorChange.obj -MD -MP -MF $(DEPDIR)/pekwm_sys-SysMonitorChange.Tpo -c -o pekwm_sys-SysMonitorChange.obj `if test -f 'SysMonitorChange.cc'; then $(CYGPATH_W) 'SysMonitorChange.cc'; else $(CYGPATH_W) '$(srcdir)/SysMonitorChange.cc'; fi`
@am__fastdepCXX_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/pekwm_sys-SysMonitorChange.Tpo $(DEPDIR)/pekwm_sys-SysMonitorChange.Po
@AMDEP_TRUE@@am__fastdepCXX_FALSE@ $(AM_V_CXX)source='SysMonitorChange.cc' object='pekwm_sys-SysMonitorChange.obj' libtool=no @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
@am__fastdepCXX_FALSE@ $(AM_V_CXX@am__nodep@)$(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(pekwm_sys_CXXFLAGS) $(CXXFLAGS) -c -o pekwm_sys-SysMonitorChange.obj `if test -f 'SysMonitorChange.cc'; then $(CYGPATH_W) 'SysMonitorChange.cc'; else $(CYGPATH_W) '$(srcdir)/SysMonitorChange.cc'; fi`
pekwm_sys-SysMonitorConfig.o: SysMonitorConfig.cc
@am__fastdepCXX_TRUE@ $(AM_V_CXX)$(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(pekwm_sys_CXXFLAGS) $(CXXFLAGS) -MT pekwm_sys-SysMonitorConfig.o -MD -MP -MF $(DEPDIR)/pekwm_sys-SysMonitorConfig.Tpo -c -o pekwm_sys-SysMonitorConfig.o `test -f 'SysMonitorConfig.cc' || echo '$(srcdir)/'`SysMonitorConfig.cc
@am__fastdepCXX_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/pekwm_sys-SysMonitorConfig.Tpo $(DEPDIR)/pekwm_sys-SysMonitorConfig.Po
@AMDEP_TRUE@@am__fastdepCXX_FALSE@ $(AM_V_CXX)source='SysMonitorConfig.cc' object='pekwm_sys-SysMonitorConfig.o' libtool=no @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
@am__fastdepCXX_FALSE@ $(AM_V_CXX@am__nodep@)$(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(pekwm_sys_CXXFLAGS) $(CXXFLAGS) -c -o pekwm_sys-SysMonitorConfig.o `test -f 'SysMonitorConfig.cc' || echo '$(srcdir)/'`SysMonitorConfig.cc
pekwm_sys-SysMonitorConfig.obj: SysMonitorConfig.cc
@am__fastdepCXX_TRUE@ $(AM_V_CXX)$(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(pekwm_sys_CXXFLAGS) $(CXXFLAGS) -MT pekwm_sys-SysMonitorConfig.obj -MD -MP -MF $(DEPDIR)/pekwm_sys-SysMonitorConfig.Tpo -c -o pekwm_sys-SysMonitorConfig.obj `if test -f 'SysMonitorConfig.cc'; then $(CYGPATH_W) 'SysMonitorConfig.cc'; else $(CYGPATH_W) '$(srcdir)/SysMonitorConfig.cc'; fi`
@am__fastdepCXX_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/pekwm_sys-SysMonitorConfig.Tpo $(DEPDIR)/pekwm_sys-SysMonitorConfig.Po
@AMDEP_TRUE@@am__fastdepCXX_FALSE@ $(AM_V_CXX)source='SysMonitorConfig.cc' object='pekwm_sys-SysMonitorConfig.obj' libtool=no @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
@am__fastdepCXX_FALSE@ $(AM_V_CXX@am__nodep@)$(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(pekwm_sys_CXXFLAGS) $(CXXFLAGS) -c -o pekwm_sys-SysMonitorConfig.obj `if test -f 'SysMonitorConfig.cc'; then $(CYGPATH_W) 'SysMonitorConfig.cc'; else $(CYGPATH_W) '$(srcdir)/SysMonitorConfig.cc'; fi`
pekwm_sys-SysResources.o: SysResources.cc
@am__fastdepCXX_TRUE@ $(AM_V_CXX)$(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(pekwm_sys_CXXFLAGS) $(CXXFLAGS) -MT pekwm_sys-SysResources.o -MD -MP -MF $(DEPDIR)/pekwm_sys-SysResources.Tpo -c -o pekwm_sys-SysResources.o `test -f 'SysResources.cc' || echo '$(srcdir)/'`SysResources.cc
@am__fastdepCXX_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/pekwm_sys-SysResources.Tpo $(DEPDIR)/pekwm_sys-SysResources.Po
@AMDEP_TRUE@@am__fastdepCXX_FALSE@ $(AM_V_CXX)source='SysResources.cc' object='pekwm_sys-SysResources.o' libtool=no @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
@am__fastdepCXX_FALSE@ $(AM_V_CXX@am__nodep@)$(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(pekwm_sys_CXXFLAGS) $(CXXFLAGS) -c -o pekwm_sys-SysResources.o `test -f 'SysResources.cc' || echo '$(srcdir)/'`SysResources.cc
pekwm_sys-SysResources.obj: SysResources.cc
@am__fastdepCXX_TRUE@ $(AM_V_CXX)$(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(pekwm_sys_CXXFLAGS) $(CXXFLAGS) -MT pekwm_sys-SysResources.obj -MD -MP -MF $(DEPDIR)/pekwm_sys-SysResources.Tpo -c -o pekwm_sys-SysResources.obj `if test -f 'SysResources.cc'; then $(CYGPATH_W) 'SysResources.cc'; else $(CYGPATH_W) '$(srcdir)/SysResources.cc'; fi`
@am__fastdepCXX_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/pekwm_sys-SysResources.Tpo $(DEPDIR)/pekwm_sys-SysResources.Po
@AMDEP_TRUE@@am__fastdepCXX_FALSE@ $(AM_V_CXX)source='SysResources.cc' object='pekwm_sys-SysResources.obj' libtool=no @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
@am__fastdepCXX_FALSE@ $(AM_V_CXX@am__nodep@)$(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(pekwm_sys_CXXFLAGS) $(CXXFLAGS) -c -o pekwm_sys-SysResources.obj `if test -f 'SysResources.cc'; then $(CYGPATH_W) 'SysResources.cc'; else $(CYGPATH_W) '$(srcdir)/SysResources.cc'; fi`
pekwm_sys-XSettings.o: XSettings.cc
@am__fastdepCXX_TRUE@ $(AM_V_CXX)$(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(pekwm_sys_CXXFLAGS) $(CXXFLAGS) -MT pekwm_sys-XSettings.o -MD -MP -MF $(DEPDIR)/pekwm_sys-XSettings.Tpo -c -o pekwm_sys-XSettings.o `test -f 'XSettings.cc' || echo '$(srcdir)/'`XSettings.cc
@am__fastdepCXX_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/pekwm_sys-XSettings.Tpo $(DEPDIR)/pekwm_sys-XSettings.Po
@AMDEP_TRUE@@am__fastdepCXX_FALSE@ $(AM_V_CXX)source='XSettings.cc' object='pekwm_sys-XSettings.o' libtool=no @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
@am__fastdepCXX_FALSE@ $(AM_V_CXX@am__nodep@)$(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(pekwm_sys_CXXFLAGS) $(CXXFLAGS) -c -o pekwm_sys-XSettings.o `test -f 'XSettings.cc' || echo '$(srcdir)/'`XSettings.cc
pekwm_sys-XSettings.obj: XSettings.cc
@am__fastdepCXX_TRUE@ $(AM_V_CXX)$(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(pekwm_sys_CXXFLAGS) $(CXXFLAGS) -MT pekwm_sys-XSettings.obj -MD -MP -MF $(DEPDIR)/pekwm_sys-XSettings.Tpo -c -o pekwm_sys-XSettings.obj `if test -f 'XSettings.cc'; then $(CYGPATH_W) 'XSettings.cc'; else $(CYGPATH_W) '$(srcdir)/XSettings.cc'; fi`
@am__fastdepCXX_TRUE@ $(AM_V_at)$(am__mv) $(DEPDIR)/pekwm_sys-XSettings.Tpo $(DEPDIR)/pekwm_sys-XSettings.Po
@AMDEP_TRUE@@am__fastdepCXX_FALSE@ $(AM_V_CXX)source='XSettings.cc' object='pekwm_sys-XSettings.obj' libtool=no @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCXX_FALSE@ DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
@am__fastdepCXX_FALSE@ $(AM_V_CXX@am__nodep@)$(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(pekwm_sys_CXXFLAGS) $(CXXFLAGS) -c -o pekwm_sys-XSettings.obj `if test -f 'XSettings.cc'; then $(CYGPATH_W) 'XSettings.cc'; else $(CYGPATH_W) '$(srcdir)/XSettings.cc'; fi`
ID: $(am__tagged_files)
$(am__define_uniq_tagged_files); mkid -fID $$unique
tags: tags-am
TAGS: tags
tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
set x; \
here=`pwd`; \
$(am__define_uniq_tagged_files); \
shift; \
if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
test -n "$$unique" || unique=$$empty_fix; \
if test $$# -gt 0; then \
$(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
"$$@" $$unique; \
else \
$(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
$$unique; \
fi; \
fi
ctags: ctags-am
CTAGS: ctags
ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
$(am__define_uniq_tagged_files); \
test -z "$(CTAGS_ARGS)$$unique" \
|| $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
$$unique
GTAGS:
here=`$(am__cd) $(top_builddir) && pwd` \
&& $(am__cd) $(top_srcdir) \
&& gtags -i $(GTAGS_ARGS) "$$here"
cscopelist: cscopelist-am
cscopelist-am: $(am__tagged_files)
list='$(am__tagged_files)'; \
case "$(srcdir)" in \
[\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
*) sdir=$(subdir)/$(srcdir) ;; \
esac; \
for i in $$list; do \
if test -f "$$i"; then \
echo "$(subdir)/$$i"; \
else \
echo "$$sdir/$$i"; \
fi; \
done >> $(top_builddir)/cscope.files
distclean-tags:
-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
distdir: $(BUILT_SOURCES)
$(MAKE) $(AM_MAKEFLAGS) distdir-am
distdir-am: $(DISTFILES)
@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
list='$(DISTFILES)'; \
dist_files=`for file in $$list; do echo $$file; done | \
sed -e "s|^$$srcdirstrip/||;t" \
-e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
case $$dist_files in \
*/*) $(MKDIR_P) `echo "$$dist_files" | \
sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
sort -u` ;; \
esac; \
for file in $$dist_files; do \
if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
if test -d $$d/$$file; then \
dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
if test -d "$(distdir)/$$file"; then \
find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
fi; \
if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
fi; \
cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
else \
test -f "$(distdir)/$$file" \
|| cp -p $$d/$$file "$(distdir)/$$file" \
|| exit 1; \
fi; \
done
check-am: all-am
check: check-am
all-am: Makefile $(PROGRAMS)
installdirs:
for dir in "$(DESTDIR)$(bindir)"; do \
test -z "$$dir" || $(MKDIR_P) "$$dir"; \
done
install: install-am
install-exec: install-exec-am
install-data: install-data-am
uninstall: uninstall-am
install-am: all-am
@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
installcheck: installcheck-am
install-strip:
if test -z '$(STRIP)'; then \
$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
install; \
else \
$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
"INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
fi
mostlyclean-generic:
clean-generic:
distclean-generic:
-$(am__rm_f) $(CONFIG_CLEAN_FILES)
-test . = "$(srcdir)" || $(am__rm_f) $(CONFIG_CLEAN_VPATH_FILES)
maintainer-clean-generic:
@echo "This command is intended for maintainers to use"
@echo "it deletes files that may require special tools to rebuild."
clean: clean-am
clean-am: clean-binPROGRAMS clean-generic mostlyclean-am
distclean: distclean-am
-rm -f ./$(DEPDIR)/pekwm_sys-SysConfig.Po
-rm -f ./$(DEPDIR)/pekwm_sys-SysMonitorChange.Po
-rm -f ./$(DEPDIR)/pekwm_sys-SysMonitorConfig.Po
-rm -f ./$(DEPDIR)/pekwm_sys-SysResources.Po
-rm -f ./$(DEPDIR)/pekwm_sys-XSettings.Po
-rm -f ./$(DEPDIR)/pekwm_sys-pekwm_sys.Po
-rm -f Makefile
distclean-am: clean-am distclean-compile distclean-generic \
distclean-tags
dvi: dvi-am
dvi-am:
html: html-am
html-am:
info: info-am
info-am:
install-data-am:
install-dvi: install-dvi-am
install-dvi-am:
install-exec-am: install-binPROGRAMS
install-html: install-html-am
install-html-am:
install-info: install-info-am
install-info-am:
install-man:
install-pdf: install-pdf-am
install-pdf-am:
install-ps: install-ps-am
install-ps-am:
installcheck-am:
maintainer-clean: maintainer-clean-am
-rm -f ./$(DEPDIR)/pekwm_sys-SysConfig.Po
-rm -f ./$(DEPDIR)/pekwm_sys-SysMonitorChange.Po
-rm -f ./$(DEPDIR)/pekwm_sys-SysMonitorConfig.Po
-rm -f ./$(DEPDIR)/pekwm_sys-SysResources.Po
-rm -f ./$(DEPDIR)/pekwm_sys-XSettings.Po
-rm -f ./$(DEPDIR)/pekwm_sys-pekwm_sys.Po
-rm -f Makefile
maintainer-clean-am: distclean-am maintainer-clean-generic
mostlyclean: mostlyclean-am
mostlyclean-am: mostlyclean-compile mostlyclean-generic
pdf: pdf-am
pdf-am:
ps: ps-am
ps-am:
uninstall-am: uninstall-binPROGRAMS
.MAKE: install-am install-strip
.PHONY: CTAGS GTAGS TAGS all all-am am--depfiles check check-am clean \
clean-binPROGRAMS clean-generic cscopelist-am ctags ctags-am \
distclean distclean-compile distclean-generic distclean-tags \
distdir dvi dvi-am html html-am info info-am install \
install-am install-binPROGRAMS install-data install-data-am \
install-dvi install-dvi-am install-exec install-exec-am \
install-html install-html-am install-info install-info-am \
install-man install-pdf install-pdf-am install-ps \
install-ps-am install-strip installcheck installcheck-am \
installdirs maintainer-clean maintainer-clean-generic \
mostlyclean mostlyclean-compile mostlyclean-generic pdf pdf-am \
ps ps-am tags tags-am uninstall uninstall-am \
uninstall-binPROGRAMS
.PRECIOUS: Makefile
# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT:
# Tell GNU make to disable its built-in pattern rules.
%:: %,v
%:: RCS/%,v
%:: RCS/%
%:: s.%
%:: SCCS/s.%
pekwm-0.4.4/src/sys/SysConfig.hh 0000664 0001750 0001750 00000010250 15126136025 012156 //
// SysConfig.hh for pekwm
// Copyright (C) 2025 Claes Nästén
//
// This program is licensed under the GNU GPL.
// See the LICENSE file for more information.
//
#ifndef _PEKWM_SYS_CONFIG_HH_
#define _PEKWM_SYS_CONFIG_HH_
#include "CfgParser.hh"
#include "Daytime.hh"
#include "Os.hh"
extern "C" {
#include
}
class SysConfig {
public:
typedef std::vector string_vector;
typedef std::map string_map;
SysConfig(const std::string &config_file, Os *os);
SysConfig(const SysConfig &cfg);
~SysConfig();
bool parseConfig();
bool isXSettingsEnabled() const { return _enable_xsettings; }
const std::string& getXSettingsPath() const { return _xsettings_path; }
bool haveDpi() const {
return _dpi_override != 0.0 || ! isnan(_dpi);
}
double getDpi() const {
return _dpi_override == 0.0 ? _dpi : _dpi_override;
}
void setDpiOverride(double dpi) { _dpi_override = dpi; }
bool isLocationLookup() const { return _location_lookup; }
bool haveLocation() const {
return ! isnan(_latitude) && ! isnan(_longitude);
}
double getLatitude() const { return _latitude; }
void setLatitude(double latitude) { _latitude = latitude; }
double getLongitude() const { return _longitude; }
void setLongitude(double longitude) { _longitude = longitude; }
const std::string &getTimeOfDay() const { return _tod; }
const std::string &getMonitorsPath() const { return _monitors_path; }
bool isMonitorLoadOnChange() const { return _monitor_load_on_change; }
bool isMonitorAutoConfig() const { return _monitor_auto_configure; }
const string_vector &getDaytimeCommands() const {
return _daytime_commands;
}
const string_vector &getLocationCommands() const {
return _location_commands;
}
const std::string &getNetTheme() const { return _net_theme; }
const std::string &getNetIconTheme() const { return _net_icon_theme; }
const string_map &getXResources(TimeOfDay tod) const {
if (tod == TIME_OF_DAY_DAY) {
return _x_resources_day;
} else if (tod == TIME_OF_DAY_DAWN
&& !_x_resources_dawn.empty()) {
return _x_resources_dawn;
} else if (tod == TIME_OF_DAY_DUSK
&& !_x_resources_dawn.empty()) {
return _x_resources_dusk;
} else {
return _x_resources_night;
}
}
void setXResources(TimeOfDay tod, const string_map &x_resources) {
if (tod == TIME_OF_DAY_DAY) {
_x_resources_day = x_resources;
} else if (tod == TIME_OF_DAY_DAWN) {
_x_resources_dawn = x_resources;
} else if (tod == TIME_OF_DAY_DUSK) {
_x_resources_dusk = x_resources;
} else {
_x_resources_night = x_resources;
}
}
const string_map &getThemeXResources() const {
return _theme_x_resources;
}
void setThemeXResources(const string_map &theme_x_resources) {
_theme_x_resources = theme_x_resources;
}
static void parseConfigXResources(CfgParser::Entry *section,
string_map &resources,
const std::string &key);
private:
void parseCommands(CfgParser::Entry *section, string_vector &commands);
std::string _config_file;
Os *_os;
bool _enable_xsettings;
std::string _xsettings_path;
double _dpi;
double _dpi_override;
bool _location_lookup;
double _latitude;
double _longitude;
std::string _tod;
/* Commands run whenever daytime changes */
string_vector _daytime_commands;
/* Commands run whenever location changes */
string_vector _location_commands;
std::string _monitors_path;
/* if true, monitor configuration is loaded (if matching) upon
* connect/disconnect of a monitor */
bool _monitor_load_on_change;
/* if true, monitor will be auto configured right of current monitor
* upon connect if load is disabled/fails. */
bool _monitor_auto_configure;
/* If set, update Net/ThemeName XSetting with no suffix or -dark
* suffix depending on time of day */
std::string _net_theme;
/* Set Net/IconThemeName if non-empty */
std::string _net_icon_theme;
/* X resources set on dawn */
string_map _x_resources_dawn;
/* X resources set on day */
string_map _x_resources_day;
/* X resources set on dusk */
string_map _x_resources_dusk;
/* X resources set on night */
string_map _x_resources_night;
/* X resources set by current theme */
string_map _theme_x_resources;
};
#endif // _PEKWM_SYS_CONFIG_HH_
pekwm-0.4.4/src/sys/XSettings.cc 0000664 0001750 0001750 00000024533 15126136025 012201 //
// XSettings.cc for pekwm
// Copyright (C) 2025 Claes Nästén
//
// This program is licensed under the GNU GPL.
// See the LICENSE file for more information.
//
#include "CfgParser.hh"
#include "Charset.hh"
#include "Debug.hh"
#include "Util.hh"
#include "XSettings.hh"
std::string
_quote(const std::string &str_in)
{
std::string str;
Charset::Utf8Iterator it(str_in);
for (; ! it.end(); ++it) {
const char *c = *it;
if (c[1] == '\0' && (c[0] == '\\' || c[0] == '"')) {
str += '\\';
}
str += c;
}
return str;
}
void
XSetting::write(std::ostream &os, const std::string &name)
{
os.put(_type);
os.put(0);
uint16_t name_len = static_cast(name.size());
os.write(reinterpret_cast(&name_len), 2);
os.write(name.c_str(), name_len);
writePad(os, name_len, 4);
os.write(reinterpret_cast(&_last_changed), 4);
}
void
XSetting::writePad(std::ostream &os, size_t len, size_t multiple)
{
int pad_bytes = len % multiple;
if (pad_bytes != 0) {
pad_bytes = 4 - pad_bytes;
}
for (int i = 0; i < pad_bytes; i++) {
os.put(0);
}
}
/**
* Validate name against XSETTINGS specification.
*
* (A-Z, a-z, 0-9, _ and /, no leading or ending /, no double //, must
* start with A-Z or a-z, not empty)
*/
bool
XSetting::validateName(const std::string &name, std::string &error)
{
error = "";
if (name.empty()) {
error = "name must not be empty";
} else if (! ((name[0] >= 'A' && name[0] <= 'Z')
|| (name[0] >= 'a' && name[0] <= 'z'))) {
error = "name must start with a-z, A-Z";
} else if (name[name.size() - 1] == '/') {
error = "name must not end with /";
}
int last_slash = -1;;
int name_size = static_cast(name.size());
for (int i = 1; error.empty() && i < name_size; i++) {
if (name[i] == '/' && last_slash == (i - 1)) {
error = "name must not contain //";
} else if (name[i] == '/') {
last_slash = i;
} else if (! ((name[i] >= 'A' && name[i] <= 'Z')
|| (name[i] >= 'a' && name[i] <= 'z')
|| (name[i] >= '0' && name[i] <= '9'))) {
error = "name can only contain a-z, A-Z, 0-9 and /";
}
}
return error.empty();
}
void
XSettingString::write(std::ostream &os, const std::string &name)
{
XSetting::write(os, name);
uint32_t value_len = static_cast(_value.size());
os.write(reinterpret_cast(&value_len), 4);
os.write(_value.c_str(), value_len);
writePad(os, value_len, 4);
}
std::string
XSettingString::toString() const
{
std::string str("s");
return str + _quote(_value);
}
void
XSettingInteger::write(std::ostream &os, const std::string &name)
{
XSetting::write(os, name);
os.write(reinterpret_cast(&_value), 4);
}
std::string
XSettingInteger::toString() const
{
std::string str("i");
return str + std::to_string(_value);
}
void
XSettingColor::write(std::ostream &os, const std::string &name)
{
XSetting::write(os, name);
os.write(reinterpret_cast(&_r), 2);
os.write(reinterpret_cast(&_b), 2);
os.write(reinterpret_cast(&_g), 2);
os.write(reinterpret_cast(&_a), 2);
}
std::string
XSettingColor::toString() const
{
std::stringstream buf;
buf << "c(" << _r << ", " << _g << ", " << _b << ", " << _a << ")";
return buf.str();
}
XSettingColor*
mkXSettingColor(const std::string &str)
{
if (str.size() < 10 || str[0] != 'c'
|| str[1] != '(' || str[str.size() - 1] != ')') {
return nullptr;
}
std::vector toks;
if (Util::splitString(str.substr(2, str.size() - 3), toks,
",", 0, true) != 4) {
return nullptr;
}
try {
uint16_t r = std::stoi(toks[0]);
uint16_t g = std::stoi(toks[1]);
uint16_t b = std::stoi(toks[2]);
uint16_t a = std::stoi(toks[3]);
return new XSettingColor(r, g, b, a);
} catch (std::invalid_argument&) {
return nullptr;
}
}
XSetting*
mkXSetting(const std::string &str)
{
if (str.empty()) {
return nullptr;
}
switch (str[0]) {
case 's':
return new XSettingString(str.substr(1));
case 'i':
try {
int value = std::stoi(str.substr(1));
return new XSettingInteger(value);
} catch (std::invalid_argument&) {
return nullptr;
}
case 'c':
return mkXSettingColor(str);
default:
return nullptr;
}
}
XSettings::XSettings()
: _session_atom(None),
_owner(false)
{
_window = X11::createWmWindow(X11::getRoot(), -200, -200, 5, 5,
InputOutput, PropertyChangeMask);
}
XSettings::~XSettings()
{
map::iterator it(_settings.begin());
for (; it != _settings.end(); ++it) {
delete it->second;
}
X11::destroyWindow(_window);
}
bool
XSettings::setServerOwner()
{
_owner = false;
std::string screen_num = std::to_string(X11::getScreenNum());
std::string session_name("_XSETTINGS_S" + screen_num);
_session_atom = X11::getAtomId(session_name);
X11::grabServer();
Window session_owner = X11::getSelectionOwner(_session_atom);
if (session_owner != None) {
P_LOG(session_name << " already owned by "
<< session_owner << ", not claiming ownership");
X11::selectInput(session_owner, StructureNotifyMask);
X11::ungrabServer(false);
return false;
}
Time timestamp;
getTime(timestamp);
X11::setSelectionOwner(_session_atom, _window, timestamp);
X11::ungrabServer(false);
session_owner = X11::getSelectionOwner(_session_atom);
if (session_owner != _window) {
P_LOG("failed to set ownership on " << session_name);
return false;
}
_owner = true;
P_LOG("updated xsettings owner " << session_name << " to "
<< _window);
sendOwnerMessage(timestamp);
return true;
}
void
XSettings::clearServerOwner()
{
if (_owner) {
Time timestamp;
getTime(timestamp);
X11::setSelectionOwner(_session_atom, None);
}
_owner = false;
}
void
XSettings::sendOwnerMessage(Time timestamp)
{
X11::sendEvent(X11::getRoot(), X11::getRoot(), X11::getAtom(MANAGER),
StructureNotifyMask, timestamp, _session_atom, _window);
}
void
XSettings::updateServer()
{
std::stringstream buf;
Time timestamp;
unsigned long serial = getTime(timestamp);
writeProp(buf, serial);
Atom atom = X11::getAtom(XSETTINGS_SETTINGS);
const std::string &val = buf.str();
const uchar *val_c = reinterpret_cast(val.c_str());
X11::changeProperty(_window, atom, atom, 8, PropModeReplace,
val_c, val.size());
P_TRACE("set _XSETTINGS_SETTINGS on " << std::hex << _window
<< std::dec << ", wrote " << val.size() << " bytes");
}
void
XSettings::selectOwnerDestroyInput()
{
X11::grabServer();
Window session_owner = X11::getSelectionOwner(_session_atom);
if (session_owner != None) {
X11::selectInput(session_owner, StructureNotifyMask);
}
X11::ungrabServer(false);
}
bool
XSettings::load(const std::string &source, CfgParserSource::Type type)
{
P_TRACE("loading XSETTINGS from " << source);
CfgParser cfg(CfgParserOpt(""));
if (! cfg.parse(source, type)) {
return false;
}
CfgParser::Entry *section =
cfg.getEntryRoot()->findSection("SETTINGS");
if (section == nullptr) {
return true;
}
CfgParser::Entry::entry_cit it(section->begin());
for (; it != section->end(); ++it) {
XSetting *setting = nullptr;
std::string error;
if (XSetting::validateName((*it)->getName(), error)) {
setting = mkXSetting((*it)->getValue());
if (! setting) {
error = "invalid setting value";
}
}
if (setting) {
set((*it)->getName(), setting);
} else {
P_WARN("invalid setting " << (*it)->getValue()
<< " at " << (*it)->getSourceName()
<< ":" << (*it)->getLine()
<< ": " << error);
}
}
return true;
}
bool
XSettings::save(const std::string &path)
{
P_TRACE("saving XSETTINGS to " << path);
std::ofstream os(path.c_str());
if (! os.good()) {
return false;
}
save(os);
os.close();
return true;
}
void
XSettings::save(std::ostream &os)
{
os << "# written by pekwm_sys, overwritten by Sys XSave" << std::endl;
os << "Settings {" << std::endl;
map::iterator it(_settings.begin());
for (; it != _settings.end(); ++it) {
os << "\t\"" << _quote(it->first) << "\" = \""
<< it->second->toString() << "\"" << std::endl;
}
os << "}" << std::endl;
}
void
XSettings::writeProp(std::ostream &os, unsigned long serial)
{
int n = 1;
if (reinterpret_cast(&n)[0]) {
os.put(LSBFirst);
} else {
os.put(MSBFirst);
}
os.put(0);
os.put(0);
os.put(0);
os.write(reinterpret_cast(&serial), 4);
uint32_t num_settings = static_cast(_settings.size());
os.write(reinterpret_cast(&num_settings), 4);
map::iterator it(_settings.begin());
for (; it != _settings.end(); ++it) {
it->second->write(os, it->first);
}
}
/**
* Get setting with the provided key, returns nullptr if it is not set.
*/
const XSetting*
XSettings::get(const std::string &name) const
{
map::const_iterator it(_settings.find(name));
return it == _settings.end() ? nullptr : it->second;
}
/**
* Add string setting, overwrites existing value if any.
*/
void
XSettings::setString(const std::string &name, const std::string &value)
{
set(name, new XSettingString(value));
}
/**
* Add int32 setting, overwrites existing value if any.
*/
void
XSettings::setInt32(const std::string &name, int32_t value)
{
set(name, new XSettingInteger(value));
}
/**
* Add color setting, overwrites existing value if any.
*/
void
XSettings::setColor(const std::string &name, uint16_t r, uint16_t g,
uint16_t b, uint16_t a)
{
set(name, new XSettingColor(r, g, b, a));
}
/**
* Set property in settings, NOT updating value on X server.
*/
void
XSettings::set(const std::string &name, XSetting *setting)
{
map::iterator it(_settings.find(name));
if (it == _settings.end()) {
_settings[name] = setting;
} else {
if (setting->getLastChanged() == 0) {
// last changed not set and previous value exist,
// increment last changed.
uint32_t last_changed =
it->second->getLastChanged() + 1;
setting->setLastChanged(last_changed);
}
delete it->second;
it->second = setting;
}
}
/**
* Remove setting, independent of type, from configured settings.
*/
void
XSettings::remove(const std::string &name)
{
map::iterator it(_settings.find(name));
if (it != _settings.end()) {
delete it->second;
_settings.erase(it);
}
}
/**
* Get current time of server by generating an event and reading the
* timestamp on it.
*
* @return Time on server.
*/
unsigned long
XSettings::getTime(Time &cur_time) const
{
X11::changeProperty(_window, X11::getAtom(WM_CLASS),
X11::getAtom(STRING), 8, PropModeAppend, 0, 0);
XEvent event;
X11::getWindowEvent(_window, PropertyChangeMask, event);
cur_time = event.xproperty.time;
return event.xproperty.serial;
}
pekwm-0.4.4/src/sys/SysMonitorConfig.hh 0000664 0001750 0001750 00000007720 15126136025 013536 //
// SysMonitorConfig.hh for pekwm
// Copyright (C) 2025 Claes Nästén
//
// This program is licensed under the GNU GPL.
// See the LICENSE file for more information.
//
#ifndef _PEKWM_SYS_MONITOR_CONFIG_HH_
#define _PEKWM_SYS_MONITOR_CONFIG_HH_
#include