Package: acl Description-md5: b83fc53f6059dbeb88f11752e70968e7 Description-en: access control list - utilities This package contains the getfacl and setfacl utilities needed for manipulating access control lists. It also contains the chacl IRIX compatible utility. Package: build-essential Description-md5: 90ef0ef86cafda0bd16f746eb621d9da Description-en: Informational list of build-essential packages If you do not plan to build Debian packages, you don't need this package. Starting with dpkg (>= 1.14.18) this package is required for building Debian packages. . This package contains an informational list of packages which are considered essential for building Debian packages. This package also depends on the packages on that list, to make it easy to have the build-essential packages installed. . If you have this package installed, you only need to install whatever a package specifies as its build-time dependencies to build the package. Conversely, if you are determining what your package needs to build-depend on, you can always leave out the packages this package depends on. . This package is NOT the definition of what packages are build-essential; the real definition is in the Debian Policy Manual. This package contains merely an informational list, which is all most people need. However, if this package and the manual disagree, the manual is correct. Package: busybox Description-md5: 868c2e57f9e208f2f6216022b38967f5 Description-en: Tiny utilities for small and embedded systems BusyBox combines tiny versions of many common UNIX utilities into a single small executable. It provides minimalist replacements for the most common utilities you would usually find on your desktop system (i.e., ls, cp, mv, mount, tar, etc.). The utilities in BusyBox generally have fewer options than their full-featured GNU cousins; however, the options that are included provide the expected functionality and behave very much like their GNU counterparts. . This package installs the BusyBox binary but does not install symlinks for any of the supported utilities. Some of the utilities can be used in the system by installing the busybox-syslogd, udhcpc or udhcpd packages. Package: busybox-syslogd Description-md5: 6d204aacbcadc9711030ab99f904ca3b Description-en: Provides syslogd and klogd using busybox The system log daemon is responsible for providing logging of messages received from programs and facilities on the local host as well as from remote hosts. . The kernel log daemon listens to kernel message sources and is responsible for prioritizing and processing operating system messages. . The busybox implementation of the syslogd is particular useful on embedded, diskless (netboot) or flash disk based systems because it can use a fixed size ring buffer for logging instead of saving logs to the disk or sending it to remote logging servers. The ring buffer can be read using the (also busybox based) command logread. . This package provides the glue to the busybox syslogd and klogd to be used in the system by providing the appropriate symbolic links and scripts. Package: ceph Description-md5: 744df4d020b57452ac4638e56eff9c7b Description-en: distributed storage and file system Ceph is a massively scalable, open-source, distributed storage system that runs on commodity hardware and delivers object, block and file system storage. Package: ceph-base Description-md5: 38862c56180e1d3d93a838a6386f82bc Description-en: common ceph daemon libraries and management tools Ceph is a distributed storage system designed to provide excellent performance, reliability, and scalability. . This package contains the libraries and management tools that are common among the Ceph server daemons (ceph-mon, ceph-mgr, ceph-osd, ceph-mds). These tools are necessary for creating, running, and administering a Ceph storage cluster. Package: ceph-common Description-md5: e302e645c41e2c6148fcff41573e283b Description-en: common utilities to mount and interact with a ceph storage cluster Ceph is a distributed storage and file system designed to provide excellent performance, reliability, and scalability. This is a collection of common tools that allow one to interact with and administer a Ceph cluster. Package: ceph-mds Description-md5: d37d51a4735a093f21799c80f707168f Description-en: metadata server for the ceph distributed file system Ceph is a distributed storage and network file system designed to provide excellent performance, reliability, and scalability. . This package contains the metadata server daemon, which is used to create a distributed file system on top of the ceph storage cluster. Package: ceph-mgr Description-md5: 749cc8e373d9ddb619b2b98fce8761a4 Description-en: manager for the ceph distributed file system Ceph is a massively scalable, open-source, distributed storage system that runs on commodity hardware and delivers object, block and file system storage. . This package contains the manager daemon, which is used to expose high level management and monitoring functionality. Package: ceph-mgr-modules-core Description-md5: 76ec9efc7e6e0d4aa49f8158d74a7c3b Description-en: ceph manager modules which are always enabled Ceph is a massively scalable, open-source, distributed storage system that runs on commodity hardware and delivers object, block and file system storage. . This package contains a set of core ceph-mgr modules which are always enabled. Package: ceph-mon Description-md5: aa343322863ec9d4c967e6b512da062d Description-en: monitor server for the ceph storage system Ceph is a massively scalable, open-source, distributed storage system that runs on commodity hardware and delivers object, block and file system storage. . This package contains the cluster monitor daemon for the Ceph storage system. One or more instances of ceph-mon form a Paxos part-time parliament cluster that provides extremely reliable and durable storage of cluster membership, configuration, and state. Package: ceph-osd Description-md5: fb08b00d788b505eb4bb23072221ce43 Description-en: OSD server for the ceph storage system Ceph is a massively scalable, open-source, distributed storage system that runs on commodity hardware and delivers object, block and file system storage. . This package contains the Object Storage Daemon for the Ceph storage system. It is responsible for storing objects on a local file system and providing access to them over the network. Package: ceph-volume Description-md5: d771b38d2bcd53eaaebd0646e4edece3 Description-en: tool to facilidate OSD deployment Ceph is a massively scalable, open-source, distributed storage system that runs on commodity hardware and delivers object, block and file system storage. . This package contains a tool to deploy OSD with different devices like lvm or physical disks, and trying to follow a predictable, and robust way of preparing, activating, and starting the deployed OSD. Package: cpp-15 Description-md5: 93a75b5e1f4b43c36eba0239b6fab6a3 Description-en: GNU C preprocessor A macro processor that is used automatically by the GNU C compiler to transform programs before actual compilation. . This package has been separated from gcc for the benefit of those who require the preprocessor but not the compiler. Package: cpp-15-doc Description-md5: 22a9ba311e91d8d744a9e4df2030d2bf Description-en: Documentation for the GNU C preprocessor (cpp) Documentation for the GNU C preprocessor in info format. Package: cpp-15-for-build Description-md5: 4d867f66a5170c25af70c1bda2672d33 Description-en: GNU C preprocessor for the build architecture A macro processor that is used automatically by the GNU C compiler to transform programs before actual compilation. . This package has been separated from gcc for the benefit of those who require the preprocessor configured for the build architecture but not the compiler. . This is a dependency package. Package: cpp-15-for-host Description-md5: bdce3f8f67a0382ae150b074db5ebb6f Description-en: GNU C preprocessor for the host architecture A macro processor that is used automatically by the GNU C compiler to transform programs before actual compilation. . This package has been separated from gcc for the benefit of those who require the preprocessor configured for the host architecture but not the compiler. . When using this package, tools must be invoked with an architecture prefix. . This is a dependency package. Package: cpp-15-x86-64-linux-gnu Description-md5: 89e23d924704b3363e8aa7d815b044c4 Description-en: GNU C preprocessor for x86_64-linux-gnu A macro processor that is used automatically by the GNU C compiler to transform programs before actual compilation. . This package has been separated from gcc for the benefit of those who require the preprocessor configured for the x86_64-linux-gnu architecture but not the compiler. Package: crossbuild-essential-arm64 Description-md5: 9b2629bcd07961cfcb27934f1371078a Description-en: Informational list of cross-build-essential packages If you do not plan to cross build Debian packages, you don't need this package. Starting with sbuild (>= 0.63.0) this package is required for cross building Debian packages in a chroot. . This package contains an informational list of packages which are considered essential for cross building Debian packages. This package also depends on the packages on that list, to make it easy to have the cross-build-essential packages installed. . If you have this package installed, you only need to install whatever a package specifies as its build-time dependencies to cross build the package. Conversely, if you are determining what your package needs to build-depend on, you can always leave out the packages this package depends on. Package: crossbuild-essential-armhf Description-md5: 9b2629bcd07961cfcb27934f1371078a Description-en: Informational list of cross-build-essential packages If you do not plan to cross build Debian packages, you don't need this package. Starting with sbuild (>= 0.63.0) this package is required for cross building Debian packages in a chroot. . This package contains an informational list of packages which are considered essential for cross building Debian packages. This package also depends on the packages on that list, to make it easy to have the cross-build-essential packages installed. . If you have this package installed, you only need to install whatever a package specifies as its build-time dependencies to cross build the package. Conversely, if you are determining what your package needs to build-depend on, you can always leave out the packages this package depends on. Package: crossbuild-essential-ppc64el Description-md5: 9b2629bcd07961cfcb27934f1371078a Description-en: Informational list of cross-build-essential packages If you do not plan to cross build Debian packages, you don't need this package. Starting with sbuild (>= 0.63.0) this package is required for cross building Debian packages in a chroot. . This package contains an informational list of packages which are considered essential for cross building Debian packages. This package also depends on the packages on that list, to make it easy to have the cross-build-essential packages installed. . If you have this package installed, you only need to install whatever a package specifies as its build-time dependencies to cross build the package. Conversely, if you are determining what your package needs to build-depend on, you can always leave out the packages this package depends on. Package: crossbuild-essential-riscv64 Description-md5: 9b2629bcd07961cfcb27934f1371078a Description-en: Informational list of cross-build-essential packages If you do not plan to cross build Debian packages, you don't need this package. Starting with sbuild (>= 0.63.0) this package is required for cross building Debian packages in a chroot. . This package contains an informational list of packages which are considered essential for cross building Debian packages. This package also depends on the packages on that list, to make it easy to have the cross-build-essential packages installed. . If you have this package installed, you only need to install whatever a package specifies as its build-time dependencies to cross build the package. Conversely, if you are determining what your package needs to build-depend on, you can always leave out the packages this package depends on. Package: crossbuild-essential-s390x Description-md5: 9b2629bcd07961cfcb27934f1371078a Description-en: Informational list of cross-build-essential packages If you do not plan to cross build Debian packages, you don't need this package. Starting with sbuild (>= 0.63.0) this package is required for cross building Debian packages in a chroot. . This package contains an informational list of packages which are considered essential for cross building Debian packages. This package also depends on the packages on that list, to make it easy to have the cross-build-essential packages installed. . If you have this package installed, you only need to install whatever a package specifies as its build-time dependencies to cross build the package. Conversely, if you are determining what your package needs to build-depend on, you can always leave out the packages this package depends on. Package: debhelper Description-md5: c3d35229c1ce392f77324206e097b92e Description-en: helper programs for debian/rules A collection of programs that can be used in a debian/rules file to automate common tasks related to building Debian packages. Programs are included to install various files into your package, compress files, fix file permissions, integrate your package with the Debian menu system, debconf, doc-base, etc. Most Debian packages use debhelper as part of their build process. Package: dhcpcd-base Description-md5: a7a740a2e0d6e89348c74e9ca4a55994 Description-en: DHCPv4 and DHCPv6 dual-stack client (binaries and exit hooks) dhcpcd provides seamless IPv4 and IPv6 auto-configuration: * DHCPv4 client * DHCPv6 client with Prefix Delegation (PD) support * IPv4LL support (ZeroConf) * IPv6RS support (SLAAC) * ARP address conflict resolution * ARP ping profiles * Wireless SSID profiles . This package provides the binaries, exit hooks and manual pages. . It offers a dual-stack substitute for ISC DHCP Client (dhclient) on systems where interfaces are configured by ifupdown via using the DHCP method. . The init.d script and systemd service required for systems without ifupdown are packaged separately as dhcpcd. . Since Debian 12 (Bookworm), dhcpcd uses Predictable Network Interface Names on Linux ports. See NEWS.Debian for more details. Package: dovecot-core Description-md5: 42825422b1ef9e3a592c94dfafed375c Description-en: secure POP3/IMAP server - core files Dovecot is a mail server whose major goals are security and extreme reliability. It tries very hard to handle all error conditions and verify that all data is valid, making it nearly impossible to crash. It supports mbox/Maildir and its own dbox/mdbox formats, and should also be pretty fast, extensible, and portable. . This package contains the Dovecot main server and its command line utility. Package: dovecot-dev Description-md5: ffb4394c4cda3a428a661a4a841033fd Description-en: secure POP3/IMAP server - header files Dovecot is a mail server whose major goals are security and extreme reliability. It tries very hard to handle all error conditions and verify that all data is valid, making it nearly impossible to crash. It supports mbox/Maildir and its own dbox/mdbox formats, and should also be pretty fast, extensible, and portable. . This package contains header files needed to compile plugins for the Dovecot mail server. Package: dovecot-imapd Description-md5: c160efea9f93533ab3404291018f7556 Description-en: secure POP3/IMAP server - IMAP daemon Dovecot is a mail server whose major goals are security and extreme reliability. It tries very hard to handle all error conditions and verify that all data is valid, making it nearly impossible to crash. It supports mbox/Maildir and its own dbox/mdbox formats, and should also be pretty fast, extensible, and portable. . This package contains the Dovecot IMAP server. Package: dovecot-pop3d Description-md5: 399e133dbb91be39d372ab3528375bab Description-en: secure POP3/IMAP server - POP3 daemon Dovecot is a mail server whose major goals are security and extreme reliability. It tries very hard to handle all error conditions and verify that all data is valid, making it nearly impossible to crash. It supports mbox/Maildir and its own dbox/mdbox formats, and should also be pretty fast, extensible, and portable. . This package contains the Dovecot POP3 server. Package: dovecot-sieve Description-md5: 70234206edc75d829fdb3617a653da24 Description-en: secure POP3/IMAP server - Sieve filters support Dovecot is a mail server whose major goals are security and extreme reliability. It tries very hard to handle all error conditions and verify that all data is valid, making it nearly impossible to crash. It supports mbox/Maildir and its own dbox/mdbox formats, and should also be pretty fast, extensible, and portable. . This package provides Sieve filters support for Dovecot. Package: fonts-font-awesome Description-md5: f3bf039e4032a90c0e790bd26cdcd945 Description-en: FontAwesome free icon webfonts (current version) Font Awesome is the Internet's icon library and toolkit, used by millions of designers, developers, and content creators. . This package provides the font in TTF and WOFF2 formats. The package includes the icons.yml metadata file but not CSS files or NodeJS packages. The NodeJS package is available in the node-forkawesome-fontawesome-* packages. Package: g++-15 Description-md5: 0a3fad3367cb994bd16c61b0e16a8b9c Description-en: GNU C++ compiler This is the GNU C++ compiler, a fairly portable optimizing compiler for C++. Package: g++-15-for-build Description-md5: c033e2fdbd24e02b5599eebb61027b7c Description-en: GNU C++ compiler for the build architecture This is the GNU C++ compiler, a fairly portable optimizing compiler for C++. . This package contains C++ cross-compiler for the arch_gnu architecture. . This is a dependency package. Package: g++-15-for-host Description-md5: 9390f1b2980c545f669a0b8b8d5b11e0 Description-en: GNU C++ compiler for the host architecture This is the GNU C++ compiler, a fairly portable optimizing compiler for C++. . This package contains C++ cross-compiler for the host architecture. . When using this package, tools must be invoked with an architecture prefix. . This is a dependency package. Package: g++-15-multilib Description-md5: 291f2f15035d2eb62358c5157bbae10c Description-en: GNU C++ compiler (multilib support) This is the GNU C++ compiler, a fairly portable optimizing compiler for C++. . This is a dependency package, depending on development packages for the non-default multilib architecture(s). Package: g++-15-x86-64-linux-gnu Description-md5: 24a07843bf4c633592b1f382a69382f3 Description-en: GNU C++ compiler for the x86_64-linux-gnu architecture This is the GNU C++ compiler, a fairly portable optimizing compiler for C++. . This package contains C++ cross-compiler for the x86_64-linux-gnu architecture. Package: ga68-15-doc Description-md5: 9a8b7de6d96c2639a2c30910120b4bb2 Description-en: Documentation for the GNU Algol 68 compiler (ga68) Documentation for the GNU Algol 68 compiler in HTML and info format. Package: gcc-15 Description-md5: 394374e688b1afb3af5f419895d29698 Description-en: GNU C compiler This is the GNU C compiler, a fairly portable optimizing compiler for C. Package: gcc-15-base Description-md5: b6e93638a6d08ea7a18929d7cf078e5d Description-en: GCC, the GNU Compiler Collection (base package) This package contains files common to all languages and libraries contained in the GNU Compiler Collection (GCC). Package: gcc-15-doc Description-md5: bf320d6d806b62ff03b567626d36b1fb Description-en: Documentation for the GNU compilers (gcc, gobjc, g++) Documentation for the GNU compilers in info format. Package: gcc-15-for-build Description-md5: 1231e8563c440c0230388f9db0660a3c Description-en: GNU C compiler for the build architecture This is the GNU C compiler, a fairly portable optimizing compiler for C. . This is a dependency package. Package: gcc-15-for-host Description-md5: 2f6f77eeb03535ba77299cfe1a0ef756 Description-en: GNU C compiler for the host architecture This is the GNU C compiler, a fairly portable optimizing compiler for C. . When using this package, tools must be invoked with an architecture prefix. . This is a dependency package. Package: gcc-15-multilib Description-md5: d1bddfa375b62324197c575c04fb2e4e Description-en: GNU C compiler (multilib support) This is the GNU C compiler, a fairly portable optimizing compiler for C. . This is a dependency package, depending on development packages for the non-default multilib architecture(s). Package: gcc-15-x86-64-linux-gnu Description-md5: 7bf4c826102db622ef3a4d867a96ef4e Description-en: GNU C compiler for the x86_64-linux-gnu architecture This is the GNU C compiler for the x86_64-linux-gnu architecture, a fairly portable optimizing compiler for C. Package: gfortran-15 Description-md5: 5dd93c5d21d0717205bc5a3b538b0ca2 Description-en: GNU Fortran compiler This is the GNU Fortran compiler, which compiles Fortran on platforms supported by the gcc compiler. It uses the gcc backend to generate optimized code. Package: gfortran-15-doc Description-md5: 17a01a9ada93e104865a01e6615e2401 Description-en: Documentation for the GNU Fortran compiler (gfortran) Documentation for the GNU Fortran compiler in info format. Package: gfortran-15-for-build Description-md5: 748b70d5e078f51a0a1a8810f97e7888 Description-en: GNU Fortran compiler for the build architecture This is the GNU Fortran compiler for the build architecture, which compiles Fortran on platforms supported by the gcc compiler. It uses the gcc backend to generate optimized code. . This is a dependency package. Package: gfortran-15-for-host Description-md5: 45750004f61e98b776fd803bf4361bf0 Description-en: GNU Fortran compiler for the host architecture This is the GNU Fortran compiler for the host architecture, which compiles Fortran on platforms supported by the gcc compiler. It uses the gcc backend to generate optimized code. . When using this package, tools must be invoked with an architecture prefix. . This is a dependency package. Package: gfortran-15-multilib Description-md5: ad5cf91f123889c593b105572b4a958c Description-en: GNU Fortran compiler (multilib support) This is the GNU Fortran compiler, which compiles Fortran on platforms supported by the gcc compiler. . This is a dependency package, depending on development packages for the non-default multilib architecture(s). Package: gfortran-15-x86-64-linux-gnu Description-md5: d58c4dfdb182f598353d755dda19253d Description-en: GNU Fortran compiler for the x86_64-linux-gnu architecture This is the GNU Fortran compiler for the x86_64-linux-gnu architecture, which compiles Fortran on platforms supported by the gcc compiler. It uses the gcc backend to generate optimized code. Package: gir1.2-gtk-4.0 Description-md5: 0e856cde3e86eb181a419da2e80d941c Description-en: GTK graphical user interface library -- gir bindings GTK is a multi-platform toolkit for creating graphical user interfaces. Offering a complete set of widgets, GTK is suitable for projects ranging from small one-off tools to complete application suites. . This package can be used by other packages using the GIRepository format to generate dynamic bindings. Package: gtk-update-icon-cache Description-md5: 7085c6bbe9a81adcc1cf27c74f6df2b2 Description-en: icon theme caching utility gtk-update-icon-cache creates mmap()able cache files for icon themes. . GTK can use the cache files created by gtk-update-icon-cache to avoid a lot of system call and disk seek overhead when the application starts. Since the format of the cache files allows them to be mmap()ed shared between multiple applications, the overall memory consumption is reduced as well. Package: init Description-md5: 12a082503782e774ffe62fa80de49eb6 Description-en: metapackage ensuring an init system is installed This package is a metapackage which allows you to select from the available init systems while ensuring that one of these is available on the system at all times. Package: init-system-helpers Description-md5: facafbf6c4b9fd95c34e95938629ecef Description-en: helper tools for all init systems This package contains helper tools that are necessary for switching between the various init systems that Debian contains (e. g. sysvinit or systemd). An example is deb-systemd-helper, a script that enables systemd unit files without depending on a running systemd. . It also includes the "service", "invoke-rc.d", and "update-rc.d" scripts which provide an abstraction for enabling, disabling, starting, and stopping services for all supported Debian init systems as specified by the policy. . While this package is maintained by pkg-systemd-maintainers, it is NOT specific to systemd at all. Maintainers of other init systems are welcome to include their helpers in this package. Package: lib32gcc-15-dev Description-md5: 50201ee0230693f6a9313820d5854393 Description-en: GCC support library (32 bit development files) This package contains the headers and static library files necessary for building C programs which use libgcc, libgomp, libquadmath, libssp or libitm. Package: lib32gfortran-15-dev Description-md5: 6b37f3090548ca719a28233db2276849 Description-en: Runtime library for GNU Fortran applications (32bit development files) This package contains the headers and static library files needed to build GNU Fortran applications. Package: lib32stdc++-15-dev Description-md5: a197f2aec835e5fc6f8f76039d8a7c4e Description-en: GNU Standard C++ Library v3 (development files) This package contains the headers and static library files necessary for building C++ programs which use libstdc++. . libstdc++-v3 is a complete rewrite from the previous libstdc++-v2, which was included up to g++-2.95. The first version of libstdc++-v3 appeared in g++-3.0. Package: libabsl20260526 Description-md5: 0c12eff1a67912071e9fcce1a2b03a41 Description-en: extensions to the C++ standard library Abseil is an open-source collection of C++ library code designed to augment the C++ standard library. The Abseil library code is collected from Google's C++ codebase and has been extensively tested and used in production. In some cases, Abseil provides pieces missing from the C++ standard; in others, Abseil provides alternatives to the standard for special needs. . This package contains Abseil's shared libraries. Package: libacl1 Description-md5: 819a4a0833dcbd5db23e4a5fd341c3aa Description-en: access control list - shared library This package contains the shared library containing the POSIX 1003.1e draft standard 17 functions for manipulating access control lists. Package: libacl1-dev Description-md5: a045d1c523a69128d4ab4cdf4765ed94 Description-en: access control list - static libraries and headers This package contains the static libraries and header files needed for developing programs which make use of the access control list programming interface defined in POSIX 1003.1e draft standard 17. Package: libcap-ng-dev Description-md5: 6bf038197874d462e28409906258bc69 Description-en: Development and header files for libcap-ng This library implements the user-space interfaces to the POSIX 1003.1e capabilities available in Linux kernels. These capabilities are a partitioning of the all powerful root privilege into a set of distinct privileges. . The libcap-ng library is intended to make programming with POSIX capabilities much easier than the traditional libcap library. . This package contains header files and static libraries. Package: libcap-ng0 Description-md5: 43e332337e845c9ae5422001e67a1209 Description-en: alternate POSIX capabilities library This library implements the user-space interfaces to the POSIX 1003.1e capabilities available in Linux kernels. These capabilities are a partitioning of the all powerful root privilege into a set of distinct privileges. . The libcap-ng library is intended to make programming with POSIX capabilities much easier than the traditional libcap library. . This package contains dynamic libraries for libcap-ng. Package: libcephfs-dev Description-md5: 199cb94b0f0e5b28605c8e915275ab44 Description-en: Ceph distributed file system client library (development files) Ceph is a distributed network file system designed to provide excellent performance, reliability, and scalability. This is a shared library allowing applications to access a Ceph distributed file system via a POSIX-like interface. . This package contains development files needed for building applications that link against libcephfs2. Package: libcephfs2 Description-md5: 02d5e7983127037e5b5e5e07dea2a6e4 Description-en: Ceph distributed file system client library Ceph is a distributed network file system designed to provide excellent performance, reliability, and scalability. This is a shared library allowing applications to access a Ceph distributed file system via a POSIX-like interface. Package: libdebhelper-perl Description-md5: 28ff8c768605ed424c531fb1eb355edf Description-en: debhelper perl modules A collection of programs that can be used in a debian/rules file to automate common tasks related to building Debian packages. . This package provides the perl modules used by the scripts in debhelper. Package: libegl-mesa0 Description-md5: b66a0a444abc380f2430455fec07e449 Description-en: free implementation of the EGL API -- Mesa vendor library This package contains the EGL native platform graphics interface library. EGL provides a platform-agnostic mechanism for creating rendering surfaces for use with other graphics libraries, such as OpenGL|ES. . This package contains the Mesa vendor library for EGL. Package: libegl1-mesa-dev Description-md5: f0976997100febbc0dde500dd9c87805 Description-en: free implementation of the EGL API -- development files This package contains the development environment required for compiling programs against EGL native platform graphics interface library. EGL provides a platform-agnostic mechanism for creating rendering surfaces for use with other graphics libraries, such as OpenGL|ES. . This package provides the development environment for compiling programs against the EGL library. Package: libga68-1 Description-md5: 5b7e5135ff8b2edbf39411219e7e6434 Description-en: GNU Algol 68 standard library (runtime library) This is the GNU Algol 68 standard library that comes with the ga68 compiler. Package: libga68-15-dev Description-md5: 9574aee072e6e6899fe754ed2347c9c0 Description-en: GNU Algol 68 standard library This is the Algol 68 standard library that comes with the ga68 compiler. Package: libgbm-dev Description-md5: 97d3ae24c3bec4dfba8e29c665cda9e5 Description-en: generic buffer management API -- development files This package contains the GBM buffer management library. It provides a mechanism for allocating buffers for graphics rendering tied to Mesa. . GBM is intended to be used as a native platform for EGL on drm or openwfd. . This package provides the development environment for compiling programs against the GBM library. Package: libgbm1 Description-md5: 9c1f8de2c17715ff7ed9524db86be4dd Description-en: generic buffer management API -- runtime This package contains the GBM buffer management library. It provides a mechanism for allocating buffers for graphics rendering tied to Mesa. . GBM is intended to be used as a native platform for EGL on drm or openwfd. Package: libgcc-15-dev Description-md5: 4ab7cb439b47e1d0796fbaf8447229ac Description-en: GCC support library (development files) This package contains the headers and static library files necessary for building C programs which use libgcc, libgomp, libquadmath, libssp or libitm. Package: libgcobol-15-dev Description-md5: 1beb62506c556ed87d0ba541f9ba4f3b Description-en: GNU COBOL standard library This is the COBOL standard library that comes with the gcobol compiler. Package: libgcobol1 Description-md5: c971f050ff5daf13bb63cc1de52ddabd Description-en: GNU COBOL standard library (runtime library) This is the GNU COBOL standard library that comes with the gcobol compiler. Package: libgdiagnostics-15-dev Description-md5: 25298d5ee7dca4e26a8ec417663f0cc9 Description-en: GCC diagnostic-handling code wrapped into a library (development files) GCCs diagnostic-handling code covers things like - quoting pertinent source code (with a cache) - underlining points and ranges in the source code, possibly with labels - emitting fix-it hints - generating patches from fix-it hints - SARIF output Package: libgfortran-15-dev Description-md5: 146f5739f84c8211389d84c7aa5bf949 Description-en: Runtime library for GNU Fortran applications (development files) This package contains the headers and static library files needed to build GNU Fortran applications. Package: libgit2-1.9 Description-md5: 21ccc509818a651f24c1dc0ed5907a4c Description-en: low-level Git library libgit2 is a portable, pure C implementation of the Git distributed version control system core methods provided as a re-entrant link-able library with a solid API. Package: libgit2-dev Description-md5: 0ecd9e5d81e77e4aa1198aab98818ccd Description-en: low-level Git library (development files) libgit2 is a portable, pure C implementation of the Git distributed version control system core methods provided as a re-entrant link-able library with a solid API. . This package contains the development files for libgit2. Package: libgit2-experimental-dev Description-md5: 78d00c9f714cfde6ec39414cedef82ec Description-en: low-level Git library with SHA-256 support (development files) libgit2 is a portable, pure C implementation of the Git distributed version control system core methods provided as a re-entrant link-able library with a solid API. . This package contains the development files for libgit2 with experimental SHA-256 support enabled. Package: libgit2-experimental1.9 Description-md5: 489102faf357eb28fa79cc5c2e9728bb Description-en: low-level Git library with SHA-256 support libgit2 is a portable, pure C implementation of the Git distributed version control system core methods provided as a re-entrant link-able library with a solid API. . This package contains the shared library version with experimental SHA-256 support enabled. Package: libgl1-mesa-dev Description-md5: 635a93bcd1440d16621693fe064c2aa9 Description-en: transitional dummy package This is a transitional dummy package, it can be safely removed. Package: libgl1-mesa-dri Description-md5: 4ce0833dab51e157223384b77395619a Description-en: free implementation of the OpenGL API -- DRI modules This version of Mesa provides GLX and DRI capabilities: it is capable of both direct and indirect rendering. For direct rendering, it can use DRI modules from the libgl1-mesa-dri package to accelerate drawing. . This package does not include the OpenGL library itself, only the DRI modules for accelerating direct rendering. . For a complete description of Mesa, please look at the libglx-mesa0 package. Package: libgles2-mesa-dev Description-md5: 635a93bcd1440d16621693fe064c2aa9 Description-en: transitional dummy package This is a transitional dummy package, it can be safely removed. Package: libglx-mesa0 Description-md5: 553ff9489ccb9f6bdae31dc8c33ac85b Description-en: free implementation of the OpenGL API -- GLX vendor library Mesa is a 3-D graphics library with an API which is very similar to that of OpenGL. To the extent that Mesa utilizes the OpenGL command syntax or state machine, it is being used with authorization from Silicon Graphics, Inc. However, the authors make no claim that Mesa is in any way a compatible replacement for OpenGL or associated with Silicon Graphics, Inc. . This version of Mesa provides GLX and DRI capabilities: it is capable of both direct and indirect rendering. For direct rendering, it can use DRI modules from the libgl1-mesa-dri package to accelerate drawing. . This package does not include the modules themselves: these can be found in the libgl1-mesa-dri package. Package: libgtk-4-1 Description-md5: 02e4be37fe9843eb98242e33800e4fb6 Description-en: GTK graphical user interface library GTK is a multi-platform toolkit for creating graphical user interfaces. Offering a complete set of widgets, GTK is suitable for projects ranging from small one-off tools to complete application suites. . This package contains the shared libraries. Package: libgtk-4-bin Description-md5: 056ac7d3074cbdd205e955c8d8589cdd Description-en: programs for the GTK graphical user interface library GTK is a multi-platform toolkit for creating graphical user interfaces. Offering a complete set of widgets, GTK is suitable for projects ranging from small one-off tools to complete application suites. . This package contains the utilities which are used by the libraries and other packages. Package: libgtk-4-common Description-md5: 80ace64c76aad30366eb036871cfaf48 Description-en: common files for the GTK graphical user interface library GTK is a multi-platform toolkit for creating graphical user interfaces. Offering a complete set of widgets, GTK is suitable for projects ranging from small one-off tools to complete application suites. . This package contains the common files which the libraries need. Package: libgtk-4-dev Description-md5: 4fe57949589093654313cc79d6da8008 Description-en: development files for the GTK library GTK is a multi-platform toolkit for creating graphical user interfaces. Offering a complete set of widgets, GTK is suitable for projects ranging from small one-off tools to complete application suites. . This package contains the header and development files which are needed for building GTK applications. Package: libgtk-4-doc Description-md5: 6c68a0540fbc36784326ef684049298c Description-en: documentation for the GTK graphical user interface library GTK is a multi-platform toolkit for creating graphical user interfaces. Offering a complete set of widgets, GTK is suitable for projects ranging from small one-off tools to complete application suites. . This package contains the HTML documentation for the GTK library in /usr/share/doc/libgtk-4-doc/ . Package: libipa-hbac-dev Description-md5: 5a9c2169640442780282800065de55cf Description-en: FreeIPA HBAC Evaluator library -- development files Utility library to validate FreeIPA HBAC rules for authorization requests. . This package contains header files and symlinks to develop programs which will use the libipa-hbac library. Package: libipa-hbac0t64 Description-md5: 03e6128075af8f51f143ba66443a79ae Description-en: FreeIPA HBAC Evaluator library Utility library to validate FreeIPA HBAC rules for authorization requests. Package: libjs-sphinxdoc Description-md5: 63a7d0de40a41c4829f00fcb9417cf9d Description-en: JavaScript support for Sphinx documentation Sphinx is a tool for producing documentation for Python projects, using reStructuredText as markup language. . This package provides JavaScript code for documentation generated by Sphinx. Package: libmariadb-dev Description-md5: 8a4024b869a14aa1c459413a6bb63140 Description-en: MariaDB database development files MariaDB is a fast, stable and true multi-user, multi-threaded SQL database server. SQL (Structured Query Language) is the most popular database query language in the world. The main goals of MariaDB are speed, robustness and ease of use. . This package includes development libraries and header files to allow sources expecting the MariaDB Connector/C to build. Sources that expect the MySQL client libraries should use files from the libmariadb-dev-compat package. Package: libmariadb3 Description-md5: c48685b906f3842ee48fd71db5681868 Description-en: MariaDB database client library MariaDB is a fast, stable and true multi-user, multi-threaded SQL database server. SQL (Structured Query Language) is the most popular database query language in the world. The main goals of MariaDB are speed, robustness and ease of use. . This package includes the client library. Package: libmariadbd-dev Description-md5: 7db3cf98f13e6c2679120ae92a13e990 Description-en: MariaDB embedded database, development files package MariaDB is a fast, stable and true multi-user, multi-threaded SQL database server. SQL (Structured Query Language) is the most popular database query language in the world. The main goals of MariaDB are speed, robustness and ease of use. . This package includes the MariaDB embedded server library development and header files. Package: libmariadbd19t64 Description-md5: a85241d1aa0dccaa3ede8bda094b9117 Description-en: MariaDB embedded database, shared library MariaDB is a fast, stable and true multi-user, multi-threaded SQL database server. SQL (Structured Query Language) is the most popular database query language in the world. The main goals of MariaDB are speed, robustness and ease of use. . This package includes a shared library for embedded MariaDB applications. Package: libnss-mymachines Description-md5: 588342105e1fdd6ff74c093651cb80cc Description-en: nss module to resolve hostnames for local container instances nss-mymachines is a plugin for the GNU Name Service Switch (NSS) functionality of the GNU C Library (glibc) providing hostname resolution for local containers that are registered with systemd-machined.service(8). The container names are resolved to IP addresses of the specific container, ordered by their scope. . Installing this package automatically adds mymachines to /etc/nsswitch.conf. Package: libnss-sss Description-md5: 74bc44873ed990a3f08b6c810bd12c1e Description-en: Nss library for the System Security Services Daemon Provides a set of daemons to manage access to remote directories and authentication mechanisms. It provides an NSS and PAM interface toward the system and a pluggable backend system to connect to multiple different account sources. It is also the basis to provide client auditing and policy services for projects like FreeIPA. . This package provide the nss library to connect to the sssd daemon. Package: libnss-systemd Description-md5: f5bdd7572f97a2162876ec5b0a11a2ca Description-en: nss module providing dynamic user and group name resolution nss-systemd is a plug-in module for the GNU Name Service Switch (NSS) functionality of the GNU C Library (glibc), providing UNIX user and group name resolution for dynamic users and groups allocated through the DynamicUser= option in systemd unit files. See systemd.exec(5) for details on this option. . Installing this package automatically adds the module to /etc/nsswitch.conf. Package: libpam-sss Description-md5: 917151896ca3a8e201cc53bf9cde21fc Description-en: Pam module for the System Security Services Daemon Provides a set of daemons to manage access to remote directories and authentication mechanisms. It provides an NSS and PAM interface toward the system and a pluggable backend system to connect to multiple different account sources. It is also the basis to provide client auditing and policy services for projects like FreeIPA. . This package provide the pam module to connect to the sssd daemon. Package: libpam-systemd Description-md5: 7acf141cc9da21b0ad349b6cecc40e46 Description-en: system and service manager - PAM module This package contains the PAM module which registers user sessions in the systemd control group hierarchy for logind. . If in doubt, do install this package. . Packages that depend on logind functionality need to depend on libpam-systemd. Package: librados-dev Description-md5: 45a1795729f9041b2c4d34b965fbaee2 Description-en: RADOS distributed object store client library (development files) RADOS is a reliable, autonomic distributed object storage cluster developed as part of the Ceph distributed storage system. This is a shared library allowing applications to access the distributed object store using a simple file-like interface. . This package contains development files needed for building applications that link against librados2. Package: librados2 Description-md5: 42d0f393b45b7f226597be77c6f81917 Description-en: RADOS distributed object store client library RADOS is a reliable, autonomic distributed object storage cluster developed as part of the Ceph distributed storage system. This is a shared library allowing applications to access the distributed object store using a simple file-like interface. Package: libradospp-dev Description-md5: 4ce7db00f2938342bfc7020f0991c068 Description-en: RADOS distributed object store client C++ library (development files) RADOS is a reliable, autonomic distributed object storage cluster developed as part of the Ceph distributed storage system. This is a shared library allowing applications to access the distributed object store using a simple file-like interface. . This package contains development files needed for building C++ applications that link against librados. Package: libradosstriper-dev Description-md5: 6f57130183c8867822b0282d4ac643de Description-en: RADOS striping interface (development files) libradosstriper is a striping interface built on top of the rados library, allowing to stripe bigger objects onto several standard rados objects using an interface very similar to the rados one. . This package contains development files needed for building applications that link against libradosstriper. Package: libradosstriper1 Description-md5: 8eaa39c6dbf5ac98aa498ab19f58ef59 Description-en: RADOS striping interface Striping interface built on top of the rados library, allowing to stripe bigger objects onto several standard rados objects using an interface very similar to the rados one. Package: librbd-dev Description-md5: 5a3f9d05f90eae572a3f0c323daf1cab Description-en: RADOS block device client library (development files) RBD is a block device striped across multiple distributed objects in RADOS, a reliable, autonomic distributed object storage cluster developed as part of the Ceph distributed storage system. This is a shared library allowing applications to manage these block devices. . This package contains development files needed for building applications that link against librbd1. Package: librbd1 Description-md5: 3b39955e1c12f7ad8d4c44efcc8ec188 Description-en: RADOS block device client library RBD is a block device striped across multiple distributed objects in RADOS, a reliable, autonomic distributed object storage cluster developed as part of the Ceph distributed storage system. This is a shared library allowing applications to manage these block devices. Package: librgw-dev Description-md5: 8149104396a488a846ee0d3aa3519969 Description-en: RADOS client library (development files) RADOS is a distributed object store used by the Ceph distributed storage system. This package provides a REST gateway to the object store that aims to implement a superset of Amazon's S3 service. . This package contains development files needed for building applications that link against librgw2. Package: librgw2 Description-md5: f22d09b57c5aae1c633c01f1f6921964 Description-en: RADOS Gateway client library RADOS is a distributed object store used by the Ceph distributed storage system. This package provides a REST gateway to the object store that aims to implement a superset of Amazon's S3 service. . This package contains the library interface and headers only. Package: libselinux-dev Description-md5: ca6eeba78d95ecb95827216f2b16ab42 Description-en: SELinux development headers This package provides the static libraries and header files needed for developing SELinux applications. Security-enhanced Linux is a patch of the Linux kernel and a number of utilities with enhanced security functionality designed to add mandatory access controls to Linux. The Security-enhanced Linux kernel contains new architectural components originally developed to improve the security of the Flask operating system. These architectural components provide general support for the enforcement of many kinds of mandatory access control policies, including those based on the concepts of Type Enforcement, Role-based Access Control, and Multi-level Security. Package: libselinux1 Description-md5: 90f6e1cb06c527bc3fc11ec6f969c59c Description-en: SELinux runtime shared libraries This package provides the shared libraries for Security-enhanced Linux that provides interfaces (e.g. library functions for the SELinux kernel APIs like getcon(), other support functions like getseuserbyname()) to SELinux-aware applications. Security-enhanced Linux is a patch of the Linux kernel and a number of utilities with enhanced security functionality designed to add mandatory access controls to Linux. The Security-enhanced Linux kernel contains new architectural components originally developed to improve the security of the Flask operating system. These architectural components provide general support for the enforcement of many kinds of mandatory access control policies, including those based on the concepts of Type Enforcement, Role-based Access Control, and Multi-level Security. . libselinux1 provides an API for SELinux applications to get and set process and file security contexts and to obtain security policy decisions. Required for any applications that use the SELinux API. libselinux may use the shared libsepol to manipulate the binary policy if necessary (e.g. to downgrade the policy format to an older version supported by the kernel) when loading policy. Package: libsqlite3-mod-ceph Description-md5: 15720a87061408811ae326114dbd92e3 Description-en: SQLite3 VFS for Ceph A SQLite3 VFS for storing and manipulating databases stored on Ceph's RADOS distributed object store. . This packages contains the loadable extension module for SQLite3. Package: libsqlite3-mod-ceph-dev Description-md5: 3e50681a5f6b0394e44543926bc840a7 Description-en: SQLite3 VFS for Ceph (development files) A SQLite3 VFS for storing and manipulating databases stored on Ceph's RADOS distributed object store. . This package contains development files needed for building applications that link against libsqlite3-mod-ceph. Package: libssh2-1-dev Description-md5: 069490795958c24c9fe87f4f276ea25c Description-en: SSH2 client-side library (development headers) libssh2 is a client-side C library implementing the SSH2 protocol. It supports regular terminal, SCP and SFTP (v1-v5) sessions; port forwarding, X11 forwarding; password, key-based and keyboard-interactive authentication. . This package contains the development files. Package: libssh2-1t64 Description-md5: a72806365acab9f7b0057c7e13cb7b14 Description-en: SSH2 client-side library libssh2 is a client-side C library implementing the SSH2 protocol. It supports regular terminal, SCP and SFTP (v1-v5) sessions; port forwarding, X11 forwarding; password, key-based and keyboard-interactive authentication. . This package contains the runtime library. Package: libsss-certmap-dev Description-md5: 8fa62c6d6becb4747960c14fb644b6ba Description-en: Certificate mapping library for SSSD -- development files Utility library to map certificates to users based on rules. . This package contains header files and symlinks to develop programs which will use the libsss-certmap library. Package: libsss-certmap0 Description-md5: e035094e1452c56b087a2d80c1bfaca7 Description-en: Certificate mapping library for SSSD Library to map certificates to users based on rules. Package: libsss-idmap-dev Description-md5: 380345e6a57d9c89908944a161167eb2 Description-en: ID mapping library for SSSD -- development files Utility library to convert SIDs to Unix uids and gids. . This package contains header files and symlinks to develop programs which will use the libsss-idmap library. Package: libsss-idmap0 Description-md5: a1574397ba6fa04c415566b95932ee13 Description-en: ID mapping library for SSSD Utility library to convert SIDs to Unix uids and gids. Package: libsss-nss-idmap-dev Description-md5: ad1d64a48dd2cfb3d4bea2944dc871e3 Description-en: SID based lookups library for SSSD -- development files Utility library for SID based lookups. . This package contains header files and symlinks to develop programs which will use the libsss-nss-idmap library. Package: libsss-nss-idmap0 Description-md5: 0287e1121017ca777e10c336257c487a Description-en: SID based lookups library for SSSD Utility library for SID based lookups. Package: libstdc++-15-dev Description-md5: a197f2aec835e5fc6f8f76039d8a7c4e Description-en: GNU Standard C++ Library v3 (development files) This package contains the headers and static library files necessary for building C++ programs which use libstdc++. . libstdc++-v3 is a complete rewrite from the previous libstdc++-v2, which was included up to g++-2.95. The first version of libstdc++-v3 appeared in g++-3.0. Package: libstdc++-15-pic Description-md5: 1b398e74a3b20401a8669d8c6472c7cc Description-en: GNU Standard C++ Library v3 (shared library subset kit) This is used to develop subsets of the libstdc++ shared libraries for use on custom installation floppies and in embedded systems. . Unless you are making one of those, you will not need this package. Package: libsubid-dev Description-md5: bd9c910b536a4d3d61a61fc8b4cdcd47 Description-en: subordinate id handling library -- shared library The library provides an interface for querying, granding and ungranting subordinate user and group ids. . This package contains the C header files that are needed for applications to use the libsubid library. Package: libsubid5 Description-md5: a7900d85cbe3a21108f18e52c9a6ed7a Description-en: subordinate id handling library -- shared library The library provides an interface for querying, granding and ungranting subordinate user and group ids. Package: libsystemd-dev Description-md5: b7a2ec6dc94dcd8833e0cab01ff4a2c0 Description-en: systemd utility library - development files This library provides APIs to interface with various system components such as the system journal, the system service manager, D-Bus and more. . This package contains the files needed for developing applications that use libsystemd. Package: libsystemd-shared Description-md5: 96ee33bdb47b225b7cbe0eccdc682e81 Description-en: systemd shared private library This internal shared library provides common code used by various systemd components. It is supposed to decrease memory and disk footprint. The shared library is not meant for public use and is not API or ABI stable. Package: libsystemd0 Description-md5: 9afc42993cf4bce87281097b6b9586c9 Description-en: systemd utility library This library provides APIs to interface with various system components such as the system journal, the system service manager, D-Bus and more. Package: libtag-c-dev Description-md5: 538f39350eaddbdda38b60f126bcbf68 Description-en: transitional package This is a transitional package. It can safely be removed. . Packages that need taglib C bindings should use libtag-dev instead. Package: libtag-c2 Description-md5: aab18d3b0a1b77b34ac3bac33b46cb98 Description-en: audio meta-data library - C bindings TagLib is a library for reading and editing audio meta data, commonly know as tags. . - A clean, high level, C++ API to handling audio meta data. - Format specific APIs for advanced API users. - ID3v1, ID3v2, APE, FLAC, Xiph, iTunes-style MP4 and WMA tag formats. - MP3, MPC, FLAC, MP4, ASF, AIFF, WAV, TrueAudio, WavPack, Ogg FLAC, Ogg Vorbis, Speex and Opus file formats. - Basic audio file properties such as length, sample rate, etc. - Long term binary and source compatibility. - Extensible design, notably the ability to add other formats or extend - current formats as a library user. - Full support for unicode and internationalized tags. - Dual MPL and LGPL licenses. - No external toolkit dependencies. . This is the runtime package for programs that use the TagLib Audio Meta-Data Library (C bindings). Package: libtag-dev Description-md5: bb9d2209ab39abf056daf4530acb4feb Description-en: audio meta-data library - development files TagLib is a library for reading and editing audio meta data, commonly know as tags. . - A clean, high level, C++ API to handling audio meta data. - Format specific APIs for advanced API users. - ID3v1, ID3v2, APE, FLAC, Xiph, iTunes-style MP4 and WMA tag formats. - MP3, MPC, FLAC, MP4, ASF, AIFF, WAV, TrueAudio, WavPack, Ogg FLAC, Ogg Vorbis, Speex and Opus file formats. - Basic audio file properties such as length, sample rate, etc. - Long term binary and source compatibility. - Extensible design, notably the ability to add other formats or extend - current formats as a library user. - Full support for unicode and internationalized tags. - Dual MPL and LGPL licenses. - No external toolkit dependencies. . This is the development package which contains headers for the TagLib Audio Meta-Data Library. Package: libtag-doc Description-md5: 3fe778e2182e70213e355d75b3d9f44e Description-en: audio meta-data library - API documentation TagLib is a library for reading and editing audio meta data, commonly know as tags. . - A clean, high level, C++ API to handling audio meta data. - Format specific APIs for advanced API users. - ID3v1, ID3v2, APE, FLAC, Xiph, iTunes-style MP4 and WMA tag formats. - MP3, MPC, FLAC, MP4, ASF, AIFF, WAV, TrueAudio, WavPack, Ogg FLAC, Ogg Vorbis, Speex and Opus file formats. - Basic audio file properties such as length, sample rate, etc. - Long term binary and source compatibility. - Extensible design, notably the ability to add other formats or extend - current formats as a library user. - Full support for unicode and internationalized tags. - Dual MPL and LGPL licenses. - No external toolkit dependencies. . This is the documentation package which contains API documentation for the TagLib Audio Meta-Data Library. Package: libtag2 Description-md5: 5ec525990655e19ff0dcb4105441dcfe Description-en: audio meta-data library TagLib is a library for reading and editing audio meta data, commonly know as tags. . - A clean, high level, C++ API to handling audio meta data. - Format specific APIs for advanced API users. - ID3v1, ID3v2, APE, FLAC, Xiph, iTunes-style MP4 and WMA tag formats. - MP3, MPC, FLAC, MP4, ASF, AIFF, WAV, TrueAudio, WavPack, Ogg FLAC, Ogg Vorbis, Speex and Opus file formats. - Basic audio file properties such as length, sample rate, etc. - Long term binary and source compatibility. - Extensible design, notably the ability to add other formats or extend - current formats as a library user. - Full support for unicode and internationalized tags. - Dual MPL and LGPL licenses. - No external toolkit dependencies. . This is the runtime package for programs that use the TagLib Audio Meta-Data Library. Package: libudev-dev Description-md5: 3a6ff6d519afbe7874e323cf64c41387 Description-en: libudev development files This library provides APIs to introspect and enumerate devices on the local system. . This package contains the files needed for developing applications that use libudev. Package: libudev1 Description-md5: ee41de00cbb160aaa4ae2b193df34f91 Description-en: libudev shared library This library provides APIs to introspect and enumerate devices on the local system. Package: libx32gcc-15-dev Description-md5: df49fd36cacd441ececa361c98eaaa4a Description-en: GCC support library (x32 development files) This package contains the headers and static library files necessary for building C programs which use libgcc, libgomp, libquadmath, libssp or libitm. Package: libx32gfortran-15-dev Description-md5: aae616b6d05c4081844ad0d321e187db Description-en: Runtime library for GNU Fortran applications (x32 development files) This package contains the headers and static library files needed to build GNU Fortran applications. Package: libx32stdc++-15-dev Description-md5: a197f2aec835e5fc6f8f76039d8a7c4e Description-en: GNU Standard C++ Library v3 (development files) This package contains the headers and static library files necessary for building C++ programs which use libstdc++. . libstdc++-v3 is a complete rewrite from the previous libstdc++-v2, which was included up to g++-2.95. The first version of libstdc++-v3 appeared in g++-3.0. Package: linux-nvidia-bos-headers-7.0.0-2004 Description-md5: 9528a5c6adcbe5a90556e72cef3549e1 Description-en: Header files related to Linux kernel version 7.0.0 This package provides kernel header files for version 7.0.0, for sites that want the latest kernel headers. Please read /usr/share/doc/linux-nvidia-bos-headers-7.0.0-2004/debian.README.gz for details Package: login.defs Description-md5: 4085dc032cb3ecfa269c4c2c2b85249c Description-en: system user management configuration This package provides the login.defs configuration file, used by otherwise unrelated tools managing system users. Package: mariadb-client Description-md5: 82697f9416e5e5d0a4e7331c2c735591 Description-en: MariaDB database client binaries MariaDB is a fast, stable and true multi-user, multi-threaded SQL database server. SQL (Structured Query Language) is the most popular database query language in the world. The main goals of MariaDB are speed, robustness and ease of use. . This package includes the client binaries and the additional tools innotop and mariadb-report (mysqlreport). Package: mariadb-client-core Description-md5: 2862a38a5ead2e1df7366bf661e03278 Description-en: MariaDB database core client binaries MariaDB is a fast, stable and true multi-user, multi-threaded SQL database server. SQL (Structured Query Language) is the most popular database query language in the world. The main goals of MariaDB are speed, robustness and ease of use. . This package includes the core client files, as used by Akonadi. Package: mariadb-common Description-md5: 7ba51200b10cf3577582b422675a3a16 Description-en: MariaDB database common files (/etc/mysql/mariadb.conf.d/) MariaDB is a fast, stable and true multi-user, multi-threaded SQL database server. SQL (Structured Query Language) is the most popular database query language in the world. The main goals of MariaDB are speed, robustness and ease of use. . This package includes configuration files common to all MariaDB programs. Package: mariadb-plugin-provider-bzip2 Description-md5: c3950d83efdab13503f11af3ad4e2c60 Description-en: BZip2 compression support in the server and storage engines The various MariaDB storage engines, such as InnoDB, RocksDB, Mroonga, can use different compression libraries. . Plugin provides BZip2 (https://sourceware.org/bzip2/) compression . Note that these affect InnoDB and Mroonga only; RocksDB still uses the compression algorithms from its own library Package: mariadb-plugin-provider-lz4 Description-md5: cf2abaea40b7fa6e7045bc3dbbc6b437 Description-en: LZ4 compression support in the server and storage engines The various MariaDB storage engines, such as InnoDB, RocksDB, Mroonga, can use different compression libraries. . Plugin provides LZ4 (http://lz4.github.io/lz4/) compression . Note that these affect InnoDB and Mroonga only; RocksDB still uses the compression algorithms from its own library Package: mariadb-plugin-provider-lzma Description-md5: 0e4da2d382b71c76d84e85260d3ba2d1 Description-en: LZMA compression support in the server and storage engines The various MariaDB storage engines, such as InnoDB, RocksDB, Mroonga, can use different compression libraries. . Plugin provides LZMA (https://tukaani.org/lzma/) compression . Note that these affect InnoDB and Mroonga only; RocksDB still uses the compression algorithms from its own library Package: mariadb-plugin-provider-lzo Description-md5: 3a16b9262ea33fc1cd2eae2afa074936 Description-en: LZO compression support in the server and storage engines The various MariaDB storage engines, such as InnoDB, RocksDB, Mroonga, can use different compression libraries. . Plugin provides LZO (http://www.oberhumer.com/opensource/lzo/) compression . Note that these affect InnoDB and Mroonga only; RocksDB still uses the compression algorithms from its own library Package: mariadb-plugin-provider-snappy Description-md5: 482f1c3726111908a9a3375a4fe7489c Description-en: Snappy compression support in the server and storage engines The various MariaDB storage engines, such as InnoDB, RocksDB, Mroonga, can use different compression libraries. . Plugin provides Snappy (https://github.com/google/snappy) compression . Note that these affect InnoDB and Mroonga only; RocksDB still uses the compression algorithms from its own library Package: mariadb-server Description-md5: ae76dbcde4bf3e79b8228e6dad967834 Description-en: MariaDB database server binaries MariaDB is a fast, stable and true multi-user, multi-threaded SQL database server. SQL (Structured Query Language) is the most popular database query language in the world. The main goals of MariaDB are speed, robustness and ease of use. . This package includes the server binaries. Package: mariadb-server-core Description-md5: a01f76260dfbedfdfbfcd8ff440b8a4c Description-en: MariaDB database core server files MariaDB is a fast, stable and true multi-user, multi-threaded SQL database server. SQL (Structured Query Language) is the most popular database query language in the world. The main goals of MariaDB are speed, robustness and ease of use. . This package includes the core server files, as used by Akonadi. Package: mesa-common-dev Description-md5: 0d9d46ba6861a0a8c404cf51db1e980d Description-en: Developer documentation for Mesa This package includes the specifications for the Mesa-specific OpenGL extensions, the complete set of release notes and the development header files common to all Mesa packages. Package: mesa-libgallium Description-md5: bbed14c249d6107bdd29c797c354b48e Description-en: shared infrastructure for Mesa drivers This package contains libgallium, a private library shared between multiple Mesa drivers. This library is an implementation detail of Mesa and should not be used directly by user code. Package: mesa-vulkan-drivers Description-md5: de68f7559174261711b175701783338c Description-en: Mesa Vulkan graphics drivers Vulkan is a low-overhead 3D graphics and compute API. This package includes Vulkan drivers provided by the Mesa project. Package: openvswitch-common Description-md5: 592fb336c66a49b36ec2d6b8873eb66a Description-en: Open vSwitch common components Open vSwitch is a production quality, multilayer, software-based, Ethernet virtual switch. It is designed to enable massive network automation through programmatic extension, while still supporting standard management interfaces and protocols (e.g. NetFlow, IPFIX, sFlow, SPAN, RSPAN, CLI, LACP, 802.1ag). In addition, it is designed to support distribution across multiple physical servers similar to VMware's vNetwork distributed vswitch or Cisco's Nexus 1000V. . openvswitch-common provides components required by both openvswitch-switch and openvswitch-testcontroller. Package: openvswitch-doc Description-md5: 34dbb9eb458b41810977ed67bd034a5b Description-en: Open vSwitch documentation Open vSwitch is a production quality, multilayer, software-based, Ethernet virtual switch. It is designed to enable massive network automation through programmatic extension, while still supporting standard management interfaces and protocols (e.g. NetFlow, IPFIX, sFlow, SPAN, RSPAN, CLI, LACP, 802.1ag). In addition, it is designed to support distribution across multiple physical servers similar to VMware's vNetwork distributed vswitch or Cisco's Nexus 1000V. . This package provides documentation for configuration and use of Open vSwitch. Package: openvswitch-switch Description-md5: ff569939b14d8f902d88039019fdf3ae Description-en: Open vSwitch switch implementations Open vSwitch is a production quality, multilayer, software-based, Ethernet virtual switch. It is designed to enable massive network automation through programmatic extension, while still supporting standard management interfaces and protocols (e.g. NetFlow, IPFIX, sFlow, SPAN, RSPAN, CLI, LACP, 802.1ag). In addition, it is designed to support distribution across multiple physical servers similar to VMware's vNetwork distributed vswitch or Cisco's Nexus 1000V. . openvswitch-switch provides the userspace components and utilities for the Open vSwitch kernel-based switch. Package: openvswitch-switch-dpdk Description-md5: c9a918dc998b88bacbc77b69bf99d90f Description-en: DPDK enabled Open vSwitch switch implementation Open vSwitch is a production quality, multilayer, software-based, Ethernet virtual switch. It is designed to enable massive network automation through programmatic extension, while still supporting standard management interfaces and protocols (e.g. NetFlow, IPFIX, sFlow, SPAN, RSPAN, CLI, LACP, 802.1ag). In addition, it is designed to support distribution across multiple physical servers similar to VMware's vNetwork distributed vswitch or Cisco's Nexus 1000V. . openvswitch-switch provides the userspace components and utilities for the Open vSwitch kernel-based switch. . DPDK is a set of libraries for fast packet processing. Applications run in user-space and communicate directly with dedicated network interfaces. . This package provides a DPDK enabled implementation of the ovs-vswitchd binary. Package: ovn-central Description-md5: 5cc48d8c2c2dca5663a2e42178ed14c4 Description-en: OVN central components OVN, the Open Virtual Network, is a system to support virtual network abstraction. OVN complements the existing capabilities of OVS to add native support for virtual network abstractions, such as virtual L2 and L3 overlays and security groups. . ovn-central provides the userspace daemons, utilities and databases for OVN that is run at a central location. Package: ovn-common Description-md5: 84b8e78bdbcd7c9e230195cff8664ecf Description-en: OVN common components OVN, the Open Virtual Network, is a system to support virtual network abstraction. OVN complements the existing capabilities of OVS to add native support for virtual network abstractions, such as virtual L2 and L3 overlays and security groups. . ovn-common provides components required by other OVN packages. Package: ovn-doc Description-md5: 5d9314c4dbce49af1fc81539f5c26499 Description-en: OVN documentation OVN, the Open Virtual Network, is a system to support virtual network abstraction. OVN complements the existing capabilities of OVS to add native support for virtual network abstractions, such as virtual L2 and L3 overlays and security groups. . This package provides documentation for configuration and use of OVN. Package: ovn-host Description-md5: dec3348dabde40372a2d4189bfddad30 Description-en: OVN host components OVN, the Open Virtual Network, is a system to support virtual network abstraction. OVN complements the existing capabilities of OVS to add native support for virtual network abstractions, such as virtual L2 and L3 overlays and security groups. . ovn-host provides the userspace components and utilities for OVN that can be run on every host/hypervisor. Package: passwd Description-md5: 5bbd70e421ed3367a8299e53bd7afed4 Description-en: change and administer password and group data This package includes passwd, chsh, chfn, and many other programs to maintain password and group data. . Shadow passwords are supported. See /usr/share/doc/passwd/README.Debian Package: python-pyxdg-doc Description-md5: 0e0c8b892569b4a0bf568ef7ccf113ec Description-en: Python 3 library to access freedesktop.org standards (Documentation) PyXDG contains implementations of freedesktop.org standards in Python: . * Base Directory Specification Version 0.6 * Menu Specification Version 1.0 * Desktop Entry Specification Version 1.0 * Icon Theme Specification Version 0.8 * Recent File Spec 0.2 * Shared-MIME-Database Specification 0.13 . This package contains the documentation. Package: python3-awscurl Description-md5: 11e9073d784ada89b76957df5e0acce7 Description-en: Curl like tool with AWS request signing AWSCurl is a command-line tool and Python module that brings the familiar feel of curl to access AWS APIs, complete with AWS Signature Version 4 request signing built-in. It simplifies making HTTP requests to AWS services (REST or query APIs) by automating the tedious steps of credential lookup, region/service signing and header construction. Package: python3-ceph-argparse Description-md5: 54ff980109d2f3f2037d939a5f825081 Description-en: Python 3 utility libraries for Ceph CLI Ceph is a massively scalable, open-source, distributed storage system that runs on commodity hardware and delivers object, block and file system storage. . This package contains types and routines for Python 3 used by the Ceph CLI as well as the RESTful interface. Package: python3-ceph-common Description-md5: 578fb60591c98e49ebdb59bd5c8d1c27 Description-en: Python 3 utility libraries for Ceph Ceph is a massively scalable, open-source, distributed storage system that runs on commodity hardware and delivers object, block and file system storage. . This package contains data structures, classes and functions used by Ceph. It also contains utilities used for the cephadm orchestrator. Package: python3-cephfs Description-md5: 7fc3f2adf5750a736d0cd3a1c2717e93 Description-en: Python 3 libraries for the Ceph libcephfs library Ceph is a massively scalable, open-source, distributed storage system that runs on commodity hardware and delivers object, block and file system storage. . This package contains Python 3 libraries for interacting with Ceph's CephFS file system client library. Package: python3-dateutil Description-md5: 634691f8cceb59bf1cb0af1cea8cf9e7 Description-en: powerful extensions to the standard Python 3 datetime module It features: . * computing of relative deltas (next month, next year, next monday, last week of month, etc); * computing of relative deltas between two given date and/or datetime objects * computing of dates based on very flexible recurrence rules, using a superset of the iCalendar specification. Parsing of RFC strings is supported as well. * generic parsing of dates in almost any string format * timezone (tzinfo) implementations for tzfile(5) format files (/etc/localtime, /usr/share/zoneinfo, etc), TZ environment string (in all known formats), iCalendar format files, given ranges (with help from relative deltas), local machine timezone, fixed offset timezone, UTC timezone * computing of Easter Sunday dates for any given year, using Western, Orthodox or Julian algorithms Package: python3-launchpadlib Description-md5: 53d39ea819a96d68a0e9ea110c1a58db Description-en: Launchpad web services client library (Python 3) A free Python library for scripting Launchpad through its web services interface. . It currently provides access to the following parts of Launchpad: * People and Teams * Team memberships * Bugs and bugtasks . The Launchpad API is currently in beta, and may well change in ways incompatible with this library. . This package is for Python 3. Package: python3-openvswitch Description-md5: b48125d32305301f27c5399b2d5f9139 Description-en: Python 3 bindings for Open vSwitch Open vSwitch is a production quality, multilayer, software-based, Ethernet virtual switch. It is designed to enable massive network automation through programmatic extension, while still supporting standard management interfaces and protocols (e.g. NetFlow, IPFIX, sFlow, SPAN, RSPAN, CLI, LACP, 802.1ag). In addition, it is designed to support distribution across multiple physical servers similar to VMware's vNetwork distributed vswitch or Cisco's Nexus 1000V. . This package contains the full Python 3 bindings for Open vSwitch database. Package: python3-rados Description-md5: 43720478205ddceed78c274d7e93065f Description-en: Python 3 libraries for the Ceph librados library Ceph is a massively scalable, open-source, distributed storage system that runs on commodity hardware and delivers object, block and file system storage. . This package contains Python 3 libraries for interacting with Ceph's RADOS object storage. Package: python3-rbd Description-md5: 22b3b790dd68095502c20dea19a0f940 Description-en: Python 3 libraries for the Ceph librbd library Ceph is a massively scalable, open-source, distributed storage system that runs on commodity hardware and delivers object, block and file system storage. . This package contains Python 3 libraries for interacting with Ceph's RBD block device library. Package: python3-sphinx Description-md5: 12179a5493280cf4d93e06ddec68fcc6 Description-en: documentation generator for Python projects Sphinx is a tool for producing documentation for Python projects, using reStructuredText as markup language. . Sphinx features: * HTML, CHM, LaTeX output, * Cross-referencing source code, * Automatic indices, * Code highlighting, using Pygments, * Extensibility. Existing extensions: - automatic testing of code snippets, - including docstrings from Python modules. . Build-depend on sphinx if your package uses /usr/bin/sphinx-* executables. Build-depend on python3-sphinx if your package uses the Python API (for instance by calling python3 -m sphinx). Package: python3-sss Description-md5: 3040a9db41e78d2fed41f8d9e97229da Description-en: Python3 module for the System Security Services Daemon Provides a set of daemons to manage access to remote directories and authentication mechanisms. It provides an NSS and PAM interface toward the system and a pluggable backend system to connect to multiple different account sources. It is also the basis to provide client auditing and policy services for projects like FreeIPA. . This package provide a module to access the configuration of the sssd daemon. . This package installs the library for Python 3. Package: python3-urllib3 Description-md5: 33be998223541dc8be3a3588851dd432 Description-en: HTTP library with thread-safe connection pooling for Python3 urllib3 supports features left out of urllib and urllib2 libraries. . - Re-use the same socket connection for multiple requests (HTTPConnectionPool and HTTPSConnectionPool) (with optional client-side certificate verification). - File posting (encode_multipart_formdata). - Built-in redirection and retries (optional). - Supports gzip and deflate decoding. - Thread-safe and sanity-safe. - Small and easy to understand codebase perfect for extending and building upon. Package: python3-xdg Description-md5: 934f58c8a4790c1419f5d6230812682a Description-en: Python 3 library to access freedesktop.org standards PyXDG contains implementations of freedesktop.org standards in Python: . * Base Directory Specification Version 0.6 * Menu Specification Version 1.0 * Desktop Entry Specification Version 1.0 * Icon Theme Specification Version 0.8 * Recent File Spec 0.2 * Shared-MIME-Database Specification 0.13 . This package contains the Python 3 version of the library. Package: rados-objclass-dev Description-md5: 2e5f1992e00f3e27fc27562f912e2e58 Description-en: RADOS object class development kit. . This package contains development files needed for building RADOS object class plugins. Package: radosgw Description-md5: b4529fcdad48f423601d2e19b1260783 Description-en: REST gateway for RADOS distributed object store RADOS is a distributed object store used by the Ceph distributed storage system. This package provides a REST gateway to the object store that aims to implement a superset of Amazon's S3 service as well as the OpenStack Object Storage ("Swift") API. . This package contains the proxy daemon and related tools only. Package: rsync Description-md5: 3bf40f318d2abfed74fa472aaff46d5f Description-en: fast, versatile, remote (and local) file-copying tool rsync is a fast and versatile file-copying tool which can copy locally and to/from a remote host. It offers many options to control its behavior, and its remote-update protocol can minimize network traffic to make transferring updates between machines fast and efficient. . It is widely used for backups and mirroring and as an improved copy command for everyday use. . This package provides both the rsync command line tool and optional daemon functionality. Package: sphinx-common Description-md5: bd9984218442c73c2721b81e265ef953 Description-en: documentation generator for Python projects - common data Sphinx is a tool for producing documentation for Python projects, using reStructuredText as markup language. . This package includes manual pages, templates, translations and other data files. Package: sssd Description-md5: fbc7eaa314ae2423fee9d2943b3f4223 Description-en: System Security Services Daemon -- metapackage Provides a set of daemons to manage access to remote directories and authentication mechanisms. It provides an NSS and PAM interface toward the system and a pluggable backend system to connect to multiple different account sources. It is also the basis to provide client auditing and policy services for projects like FreeIPA. . This package is a metapackage which installs the daemon and existing authentication back ends. Package: sssd-ad Description-md5: 4273ee06e2ffa001b1fbe0a4de26f278 Description-en: System Security Services Daemon -- Active Directory back end Provides the Active Directory back end that the SSSD can utilize to fetch identity data from and authenticate against an Active Directory server. Package: sssd-ad-common Description-md5: dbd13e6ad445d781c84f0033e8c07ed7 Description-en: System Security Services Daemon -- PAC responder Provides the PAC responder that the AD and IPA backends can use for fetching additional attributes from the kerberos ticket. Package: sssd-common Description-md5: a5ba2c9d00035681fc2f51380e1cdc52 Description-en: System Security Services Daemon -- common files Provides a set of daemons to manage access to remote directories and authentication mechanisms. It provides an NSS and PAM interface toward the system and a pluggable backend system to connect to multiple different account sources. It is also the basis to provide client auditing and policy services for projects like FreeIPA. . This package provides the daemon and other common files needed by the authentication back ends. Package: sssd-dbus Description-md5: 1e4f376d8fca353724788d2d7f76c0d4 Description-en: System Security Services Daemon -- D-Bus responder Provides the D-Bus responder called InfoPipe, that allows the information from the SSSD to be transmitted over the system bus. Package: sssd-ipa Description-md5: 2038cf62aa379855c7c1db16c87a719d Description-en: System Security Services Daemon -- IPA back end Provides the IPA back end that the SSSD can utilize to fetch identity data from and authenticate against an IPA server. Package: sssd-krb5 Description-md5: d0051aea66e9cb824fd5a62c13ec59f8 Description-en: System Security Services Daemon -- Kerberos back end Provides the Kerberos back end that the SSSD can utilize authenticate against a Kerberos server. Package: sssd-krb5-common Description-md5: 0db76966892b1b9d99a4e13589fa35db Description-en: System Security Services Daemon -- Kerberos helpers Provides helper processes that the LDAP and Kerberos back ends can use for Kerberos user or host authentication. Package: sssd-ldap Description-md5: 0d4cb3d2fe39a40d7b6d878a4103345c Description-en: System Security Services Daemon -- LDAP back end Provides the LDAP back end that the SSSD can utilize to fetch identity data from and authenticate against an LDAP server. Package: sssd-proxy Description-md5: db53c238b765b652c290236bc0c64fc2 Description-en: System Security Services Daemon -- proxy back end Provides the proxy back end which can be used to wrap an existing NSS and/or PAM modules to leverage SSSD caching. Package: sssd-tools Description-md5: 66903119785d144d9d3cb3400805d908 Description-en: System Security Services Daemon -- tools Provides a set of daemons to manage access to remote directories and authentication mechanisms. It provides an NSS and PAM interface toward the system and a pluggable backend system to connect to multiple different account sources. It is also the basis to provide client auditing and policy services for projects like FreeIPA. . This package provides tools to manage users, groups and nested groups when using the local id provider. Package: sudo Description-md5: b73cb2c4db765dbce361c075c621f47b Description-en: Provide limited super user privileges to specific users Sudo is a program designed to allow a sysadmin to give limited root privileges to users and log root activity. The basic philosophy is to give as few privileges as possible but still allow people to get their work done. Package: systemd Description-md5: 2728f00e9cb47f195aa39097a3afbc42 Description-en: system and service manager systemd is a system and service manager for Linux. It provides aggressive parallelization capabilities, uses socket and D-Bus activation for starting services, offers on-demand starting of daemons, keeps track of processes using Linux control groups, maintains mount and automount points and implements an elaborate transactional dependency-based service control logic. . Installing the systemd package will not switch your init system unless you boot with init=/lib/systemd/systemd or install systemd-sysv in addition. Package: systemd-container Description-md5: 68a6de2751ef446fba8e3fe7a57ebb21 Description-en: systemd container/nspawn tools This package provides systemd's tools for nspawn and container/VM management: * systemd-nspawn * systemd-machined and machinectl * systemd-importd * systemd-portabled and portablectl Package: systemd-cryptsetup Description-md5: e998662f4ed5c59ecb7053ea5d8389a9 Description-en: Provides cryptsetup, integritysetup and veritysetup utilities Utilities and units that integrated cryptsetup/integritysetup/veritysetup support in systemd. Package: systemd-dev Description-md5: eb131ce1d6cce8efc52306fe1345c633 Description-en: systemd development files This package contains the systemd and udev pkg-config files. Note that these are different from the libsystemd's and libudev's pkg-config files, which can still be found in the respective dev packages, but instead provide data such as the installation directories for units, and more. Package: systemd-oomd Description-md5: 2250389a2113f869d77c032878886a16 Description-en: userspace out-of-memory (OOM) killer systemd-oomd is a system service that uses cgroups-v2 and pressure stall information (PSI) to monitor and take action on processes before an OOM occurs in kernel space. Package: systemd-resolved Description-md5: 846dc3eb3129c6a17b29965b209c161e Description-en: systemd DNS resolver This package provides systemd's DNS resolver and the command line tool to manage it. . Installing this package automatically overwrites /etc/resolv.conf and switches it to be managed by systemd-resolved. Package: systemd-sysv Description-md5: d704d23b3cdeb076982e788442f6eee1 Description-en: system and service manager - SysV compatibility symlinks This package provides manual pages and compatibility symlinks needed for systemd to replace sysvinit. . Installing systemd-sysv will overwrite /sbin/init with a symlink to systemd. Package: systemd-timesyncd Description-md5: cc67d85c248836d96a6310e58a659de0 Description-en: minimalistic service to synchronize local time with NTP servers The package contains the systemd-timesyncd system service that may be used to synchronize the local system clock with a remote Network Time Protocol server. Package: systemd-tpm Description-md5: 52bbc254558d120e99501115faefa901 Description-en: Provides tpm2 utilities and units Utilities and units that provide tpm2 functionality and support in systemd, including boot services and generators. Package: tar Description-md5: 48033bf96442788d1f697785773ad9bb Description-en: GNU version of the tar archiving utility Tar is a program for packaging a set of files as a single archive in tar format. The function it performs is conceptually similar to cpio, and to things like PKZIP in the DOS world. It is heavily used by the Debian package management system, and is useful for performing system backups and exchanging sets of files with others. Package: udev Description-md5: e875ddb09f46f1f7672af537f0c875ca Description-en: /dev/ and hotplug management daemon udev is a daemon which dynamically creates and removes device nodes from /dev/, handles hotplug events and loads drivers at boot time. Package: uidmap Description-md5: 5a75630915e85aa203a9f7c82c737da4 Description-en: programs to help use subuids These programs help unprivileged users to create uid and gid mappings in user namespaces. Package: xserver-common Description-md5: be03943b6955ee9fae7163ad516c772f Description-en: common files used by various X servers This package provides files necessary for all X.Org based X servers. Package: xserver-xorg-core Description-md5: 018a15965c91ba9a09e0652c1c0fb9ac Description-en: Xorg X server - core server The Xorg X server is an X server for several architectures and operating systems, which is derived from the XFree86 4.x series of X servers. . The Xorg server supports most modern graphics hardware from most vendors, and supersedes all XFree86 X servers. . More information about X.Org can be found at: . This package is built from the X.org xserver module. Package: xserver-xorg-dev Description-md5: c5425cbd8103a5899200596c7a3c3033 Description-en: Xorg X server - development files This package provides development files for the X.Org ('Xorg') X server. This is not quite the same as the DDK (Driver Development Kit) from the XFree86 4.x and X.Org 6.7, 6.8 and 6.9 series of servers; it provides headers and a pkg-config file for drivers using autotools to build against. . Unless you are developing or building a driver, you probably want xserver-xorg and/or xserver-xorg-core instead. . More information about X.Org can be found at: . This package is built from the X.org xserver module. Package: cpp-15-aarch64-linux-gnu Description-md5: 1130cae7a8f2e67086bfe665527d22e8 Description-en: GNU C preprocessor for aarch64-linux-gnu A macro processor that is used automatically by the GNU C compiler to transform programs before actual compilation. . This package has been separated from gcc for the benefit of those who require the preprocessor configured for the aarch64-linux-gnu architecture but not the compiler. Package: g++-15-aarch64-linux-gnu Description-md5: 1698f8e6d84da70ee66e46fcb9fae062 Description-en: GNU C++ compiler for the aarch64-linux-gnu architecture This is the GNU C++ compiler, a fairly portable optimizing compiler for C++. . This package contains C++ cross-compiler for the aarch64-linux-gnu architecture. Package: gcc-15-aarch64-linux-gnu Description-md5: a174b3cd9d1ab0fcdf59f034f24cdb2b Description-en: GNU C compiler for the aarch64-linux-gnu architecture This is the GNU C compiler for the aarch64-linux-gnu architecture, a fairly portable optimizing compiler for C. Package: gfortran-15-aarch64-linux-gnu Description-md5: c9a58ab7359394ce988886339852089d Description-en: GNU Fortran compiler for the aarch64-linux-gnu architecture This is the GNU Fortran compiler for the aarch64-linux-gnu architecture, which compiles Fortran on platforms supported by the gcc compiler. It uses the gcc backend to generate optimized code. Package: cpp-15-arm-linux-gnueabihf Description-md5: ebf0ad16c97b571650e3bbee5ea0b0be Description-en: GNU C preprocessor for arm-linux-gnueabihf A macro processor that is used automatically by the GNU C compiler to transform programs before actual compilation. . This package has been separated from gcc for the benefit of those who require the preprocessor configured for the arm-linux-gnueabihf architecture but not the compiler. Package: g++-15-arm-linux-gnueabihf Description-md5: 7e42e2316ead40c4b651752dc83234d7 Description-en: GNU C++ compiler for the arm-linux-gnueabihf architecture This is the GNU C++ compiler, a fairly portable optimizing compiler for C++. . This package contains C++ cross-compiler for the arm-linux-gnueabihf architecture. Package: gcc-15-arm-linux-gnueabihf Description-md5: 33f90d4dfb358631d3e5a94e55aaa543 Description-en: GNU C compiler for the arm-linux-gnueabihf architecture This is the GNU C compiler for the arm-linux-gnueabihf architecture, a fairly portable optimizing compiler for C. Package: gfortran-15-arm-linux-gnueabihf Description-md5: 97ae8549d5e903133d4832ce451bf9d5 Description-en: GNU Fortran compiler for the arm-linux-gnueabihf architecture This is the GNU Fortran compiler for the arm-linux-gnueabihf architecture, which compiles Fortran on platforms supported by the gcc compiler. It uses the gcc backend to generate optimized code. Package: liberasurecode-dev Description-md5: fbad4cc5eda403f2ccf3578c485a317a Description-en: support of multiple erasure code backends - development files Liberasurecode is an erasure code library which can support multiple erasure code 'backends'. The repository includes a Jerasure for Reed-Solomon implementation. . This package contains the development files needed to build against the shared library. Package: liberasurecode1 Description-md5: 3dca7acc4e8a6c946dd42ab4f1a445a6 Description-en: support of multiple erasure code backends - shared library Liberasurecode is an erasure code library which can support multiple erasure code 'backends'. The repository includes a Jerasure for Reed-Solomon implementation. . This package contains the shared library. Package: cpp-15-i686-linux-gnu Description-md5: 1627f20783636de7a009846e94750c64 Description-en: GNU C preprocessor for i686-linux-gnu A macro processor that is used automatically by the GNU C compiler to transform programs before actual compilation. . This package has been separated from gcc for the benefit of those who require the preprocessor configured for the i686-linux-gnu architecture but not the compiler. Package: g++-15-i686-linux-gnu Description-md5: 4bcee97f3f1dbbe3d26ed394722ba5bc Description-en: GNU C++ compiler for the i686-linux-gnu architecture This is the GNU C++ compiler, a fairly portable optimizing compiler for C++. . This package contains C++ cross-compiler for the i686-linux-gnu architecture. Package: gcc-15-i686-linux-gnu Description-md5: ba5a678e8889d9e2f2dd41bf10f39ab5 Description-en: GNU C compiler for the i686-linux-gnu architecture This is the GNU C compiler for the i686-linux-gnu architecture, a fairly portable optimizing compiler for C. Package: gfortran-15-i686-linux-gnu Description-md5: b4cc25194ee0177ada8bf1a75e17c538 Description-en: GNU Fortran compiler for the i686-linux-gnu architecture This is the GNU Fortran compiler for the i686-linux-gnu architecture, which compiles Fortran on platforms supported by the gcc compiler. It uses the gcc backend to generate optimized code. Package: lib64gcc-15-dev Description-md5: 44d3aaff7c21b9d5950416cabd2035a0 Description-en: GCC support library (64bit development files) This package contains the headers and static library files necessary for building C programs which use libgcc, libgomp, libquadmath, libssp or libitm. Package: lib64gfortran-15-dev Description-md5: 552b8ddfa55fb97fed937c39ac7c9855 Description-en: Runtime library for GNU Fortran applications (64bit development files) This package contains the headers and static library files needed to build GNU Fortran applications. Package: lib64stdc++-15-dev Description-md5: a197f2aec835e5fc6f8f76039d8a7c4e Description-en: GNU Standard C++ Library v3 (development files) This package contains the headers and static library files necessary for building C++ programs which use libstdc++. . libstdc++-v3 is a complete rewrite from the previous libstdc++-v2, which was included up to g++-2.95. The first version of libstdc++-v3 appeared in g++-3.0. Package: cpp-15-powerpc64le-linux-gnu Description-md5: caf654af13d5f6bb609053003756486f Description-en: GNU C preprocessor for powerpc64le-linux-gnu A macro processor that is used automatically by the GNU C compiler to transform programs before actual compilation. . This package has been separated from gcc for the benefit of those who require the preprocessor configured for the powerpc64le-linux-gnu architecture but not the compiler. Package: g++-15-powerpc64le-linux-gnu Description-md5: ebb9916a66f41b95daf1752865ac8395 Description-en: GNU C++ compiler for the powerpc64le-linux-gnu architecture This is the GNU C++ compiler, a fairly portable optimizing compiler for C++. . This package contains C++ cross-compiler for the powerpc64le-linux-gnu architecture. Package: gcc-15-powerpc64le-linux-gnu Description-md5: 9a78fbda526c5f3157cb5ab0c3cf7fc1 Description-en: GNU C compiler for the powerpc64le-linux-gnu architecture This is the GNU C compiler for the powerpc64le-linux-gnu architecture, a fairly portable optimizing compiler for C. Package: gfortran-15-powerpc64le-linux-gnu Description-md5: c4e5fd95008e20fa21421f07aca27e28 Description-en: GNU Fortran compiler for the powerpc64le-linux-gnu architecture This is the GNU Fortran compiler for the powerpc64le-linux-gnu architecture, which compiles Fortran on platforms supported by the gcc compiler. It uses the gcc backend to generate optimized code. Package: gettext Description-md5: 0db85b3962766eeef57d5324263a308e Description-en: GNU Internationalization utilities Interesting for authors or maintainers of other packages or programs which they want to see internationalized. Package: gettext-base Description-md5: 6c8ed1da584066e0871910b60d931f43 Description-en: GNU Internationalization utilities for the base system This package includes the gettext and ngettext programs which allow other packages to internationalize the messages given by shell scripts. Package: libasprintf-dev Description-md5: cf1fef7ad5efe4699246499cc22d4b78 Description-en: use fprintf and friends in C++ - static libraries and headers This package contains development files for the libasprintf library. Package: libasprintf0v5 Description-md5: 219cd3f952d632bf9709be3cec1ed64c Description-en: use fprintf and friends in C++ - shared library This package contains the libasprintf shared library which makes the C formatted output routines (fprintf et al.) usable in C++ programs, for use with the strings and the streams. Package: libgettextpo-dev Description-md5: 9e10b083de4abd01e0722086aa10698d Description-en: process PO files - static libraries and headers This package contains development files for the libgettextpo library. Package: libgettextpo0 Description-md5: 20ba3999bd6531593d7a4b9c7b10bc14 Description-en: process PO files - shared library This package contains the libgettextpo shared library for interfacing programmatically with GNU gettext .po files. Package: postgresql-plperl-17 Description-md5: e71f9fc9f12a6b48643a5c16c534f05d Description-en: PL/Perl procedural language for PostgreSQL 17 PL/Perl enables an SQL developer to write procedural language functions for PostgreSQL 17 in Perl. You need this package if you have any PostgreSQL 17 functions that use the languages plperl or plperlu. . PostgreSQL is an object-relational SQL database management system. Package: postgresql-plpython3-17 Description-md5: 39f7322482ccde9f7b976e11030fd57d Description-en: PL/Python 3 procedural language for PostgreSQL 17 PL/Python 3 enables an SQL developer to write procedural language functions for PostgreSQL 17 in Python 3. You need this package if you have any PostgreSQL 17 functions that use the languages plpython3 or plpython3u. . PostgreSQL is an object-relational SQL database management system. Package: postgresql-pltcl-17 Description-md5: 594006a691e4767ebf6e995aa34f5e17 Description-en: PL/Tcl procedural language for PostgreSQL 17 PL/Tcl enables an SQL developer to write procedural language functions for PostgreSQL 17 in Tcl. You need this package if you have any PostgreSQL 17 functions that use the languages pltcl or pltclu. . PostgreSQL is an object-relational SQL database management system. Package: cpp-15-s390x-linux-gnu Description-md5: 543132d3aca6089e85c5024bc8d3a6ca Description-en: GNU C preprocessor for s390x-linux-gnu A macro processor that is used automatically by the GNU C compiler to transform programs before actual compilation. . This package has been separated from gcc for the benefit of those who require the preprocessor configured for the s390x-linux-gnu architecture but not the compiler. Package: g++-15-s390x-linux-gnu Description-md5: 242579a2aad3a3fffda9604eae1be5bd Description-en: GNU C++ compiler for the s390x-linux-gnu architecture This is the GNU C++ compiler, a fairly portable optimizing compiler for C++. . This package contains C++ cross-compiler for the s390x-linux-gnu architecture. Package: gcc-15-s390x-linux-gnu Description-md5: 2323f276c14ea19238d792f7bdca46a5 Description-en: GNU C compiler for the s390x-linux-gnu architecture This is the GNU C compiler for the s390x-linux-gnu architecture, a fairly portable optimizing compiler for C. Package: gfortran-15-s390x-linux-gnu Description-md5: 01fdbbd9efb81f1ce24e9908283f9b07 Description-en: GNU Fortran compiler for the s390x-linux-gnu architecture This is the GNU Fortran compiler for the s390x-linux-gnu architecture, which compiles Fortran on platforms supported by the gcc compiler. It uses the gcc backend to generate optimized code. Package: libpython3.14 Description-md5: 9cbacd47a5917d523ab3dc2284302424 Description-en: Shared Python runtime library (version 3.14) Python is a high-level, interactive, object-oriented language. Its 3.14 version includes an extensive class library with lots of goodies for network programming, system administration, sounds and graphics. . This package contains the shared runtime library, normally not needed for programs using the statically linked interpreter. Package: libpython3.14-dbg Description-md5: 66f6b70a13a54128ccb53461e125015a Description-en: Debug Build of the Python Interpreter (version 3.14) The package holds two things: . - Extensions for a Python interpreter configured with --pydebug. - Debug information for standard python extensions. . See the README.debug for more information. Package: libpython3.14-dev Description-md5: ce6c8dc1c13bf8963366e871390e26dd Description-en: Header files and a static library for Python (v3.14) Header files, a static library and development tools for building Python (v3.14) modules, extending the Python interpreter or embedding Python (v3.14) in applications. . Maintainers of Python packages should read README.maintainers. . This package contains development files. It is normally not used on it's own, but as a dependency of python3.14-dev. Package: libpython3.14-minimal Description-md5: 601b91dde3518545ee378f1b65510ae5 Description-en: Minimal subset of the Python language (version 3.14) This package contains some essential modules. It is normally not used on it's own, but as a dependency of python3.14-minimal. Package: libpython3.14-stdlib Description-md5: 96bb525edc436b64aeb74bd56209dc0e Description-en: Interactive high-level object-oriented language (standard library, version 3.14) Python is a high-level, interactive, object-oriented language. Its 3.14 version includes an extensive class library with lots of goodies for network programming, system administration, sounds and graphics. . This package contains Python 3.14's standard library. It is normally not used on its own, but as a dependency of python3.14. Package: python3.14 Description-md5: 66f3d7b75429f134b2ac347214b6fb6b Description-en: Interactive high-level object-oriented language (version 3.14) Python is a high-level, interactive, object-oriented language. Its 3.14 version includes an extensive class library with lots of goodies for network programming, system administration, sounds and graphics. Package: python3.14-dbg Description-md5: 8e3ee9bf35ba4048d7a2d2092017c543 Description-en: Debug Build of the Python Interpreter (version 3.14) The package holds two things: . - A Python interpreter configured with --pydebug. Dynamically loaded modules are searched as _d.so first. Third party extensions need a separate build to be used by this interpreter. - Debug information for standard python interpreter and extensions. . See the README.debug for more information. Package: python3.14-dev Description-md5: 0aa2cf795d335552f2891e62a787b4a4 Description-en: Header files and a static library for Python (v3.14) Header files, a static library and development tools for building Python (v3.14) modules, extending the Python interpreter or embedding Python (v3.14) in applications. . Maintainers of Python packages should read README.maintainers. Package: python3.14-gdbm Description-md5: 1b1eb032cfe3bbd69adc7b8690dbb997 Description-en: GNU dbm database support for Python (v3.14) GNU dbm database module for Python. Install this if you want to create or read GNU dbm database files with Python. Package: python3.14-minimal Description-md5: 2dd0f0c878313f4193b2e6eebaafeb79 Description-en: Minimal subset of the Python language (version 3.14) This package contains the interpreter and some essential modules. It can be used in the boot process for some basic tasks. See /usr/share/doc/python3.14-minimal/README.Debian for a list of the modules contained in this package.