Package: amd64-microcode Description-md5: c5296e9fb6c0cbc6d0e238cd0cf80dc3 Description-en: Platform firmware and microcode for AMD CPUs and SoCs This package contains microcode patches for AMD AMD64 processors. AMD releases microcode patches to correct processor behavior as documented in the respective processor revision guides. . This package includes the required firmware to enable AMD SEV (Secure Encrypted Virtualization) functionality. . This package also includes AMD TAs (Trusted Applications) required by AMD platform drivers such as AMD PMF (Platform Management Framework). . For Intel processors, please refer to the intel-microcode package. Package: apache2 Description-md5: d02426bc360345e5acd45367716dc35c Description-en: Apache HTTP Server The Apache HTTP Server Project's goal is to build a secure, efficient and extensible HTTP server as standards-compliant open source software. The result has long been the number one web server on the Internet. . Installing this package results in a full installation, including the configuration files, init scripts and support scripts. Package: apache2-bin Description-md5: 37901ca6bbb9305b61d0920ecc08204f Description-en: Apache HTTP Server (modules and other binary files) The Apache HTTP Server Project's goal is to build a secure, efficient and extensible HTTP server as standards-compliant open source software. The result has long been the number one web server on the Internet. . This package contains the binaries only and does not set up a working web-server instance. Install the "apache2" package to get a fully working instance. Package: apache2-data Description-md5: 9f2fab36019a61312dec627d1cd80365 Description-en: Apache HTTP Server (common files) The Apache HTTP Server Project's goal is to build a secure, efficient and extensible HTTP server as standards-compliant open source software. The result has long been the number one web server on the Internet. . This package contains architecture-independent common files such as icons, error pages and static index files. Package: apache2-dev Description-md5: 8ba6f3b272c39cc7a08a802594285f02 Description-en: Apache HTTP Server (development headers) The Apache HTTP Server Project's goal is to build a secure, efficient and extensible HTTP server as standards-compliant open source software. The result has long been the number one web server on the Internet. . This package provides development headers and the apxs2 binary for the Apache 2 HTTP server, useful to develop and link third party additions to the Debian Apache HTTP server package. . It also provides dh_apache2 and dh sequence addons useful to install various Debian Apache2 extensions with debhelper. It supports - Apache 2 module configurations and shared objects - Site configuration files - Global configuration files Package: apache2-doc Description-md5: 04f8562fb3fd21e5886e40af9aeb7b7d Description-en: Apache HTTP Server (on-site documentation) The Apache HTTP Server Project's goal is to build a secure, efficient and extensible HTTP server as standards-compliant open source software. The result has long been the number one web server on the Internet. . This package provides the documentation for the Apache 2 HTTP server. The documentation is shipped in HTML format and can be accessed from a local running Apache HTTP server instance or by browsing the file system directly. Package: apache2-ssl-dev Description-md5: 160d9bdafec462b08db62740b1eb83d2 Description-en: Apache HTTP Server (mod_ssl development headers) The Apache HTTP Server Project's goal is to build a secure, efficient and extensible HTTP server as standards-compliant open source software. The result has long been the number one web server on the Internet. . This package provides the development header and the dependencies for modules that interact with mod_ssl's internal openssl state. Package: apache2-utils Description-md5: f1e2440381fa90571f125990da6a52fc Description-en: Apache HTTP Server (utility programs for web servers) Provides some add-on programs useful for any web server. These include: - ab (Apache benchmark tool) - fcgistarter (Start a FastCGI program) - logresolve (Resolve IP addresses to hostnames in logfiles) - htpasswd (Manipulate basic authentication files) - htdigest (Manipulate digest authentication files) - htdbm (Manipulate basic authentication files in DBM format, using APR) - htcacheclean (Clean up the disk cache) - rotatelogs (Periodically stop writing to a logfile and open a new one) - split-logfile (Split a single log including multiple vhosts) - checkgid (Checks whether the caller can setgid to the specified group) - check_forensic (Extract mod_log_forensic output from Apache log files) - httxt2dbm (Generate dbm files for use with RewriteMap) Package: azure-proxy-agent Description-md5: 439f98334b625ecfb68caddc48869a69 Description-en: Azure Guest Proxy Agent The Azure Guest Proxy Agent is a daemon that runs on the Azure guest operating system and provides a proxy for the Azure Fabric Controller to communicate with the guest operating system. This package contains the proxy agent. Package: binutils Description-md5: fde49b4cfeaad346a6e094f973da28d7 Description-en: GNU assembler, linker and binary utilities The programs in this package are used to assemble, link and manipulate binary and object files. They may be used in conjunction with a compiler and various libraries to build programs. Package: binutils-aarch64-linux-gnu Description-md5: b1fa078aa1b7251d4f6c406e117f03f9 Description-en: GNU binary utilities, for aarch64-linux-gnu target This package provides GNU assembler, linker and binary utilities for the aarch64-linux-gnu target. . You don't need this package unless you plan to cross-compile programs for aarch64-linux-gnu and aarch64-linux-gnu is not your native platform. Package: binutils-aarch64-linux-gnu-dbg Description-md5: fff9959cbd9ee77b431761dfbbeae3a2 Description-en: GNU binary utilities, for aarch64-linux-gnu target (debug symbols) This package provides debug symbols for binutils-aarch64-linux-gnu. Package: binutils-arm-linux-gnueabihf Description-md5: 128af1a08153dc96e513aa5cad5cbb55 Description-en: GNU binary utilities, for arm-linux-gnueabihf target This package provides GNU assembler, linker and binary utilities for the arm-linux-gnueabihf target. . You don't need this package unless you plan to cross-compile programs for arm-linux-gnueabihf and arm-linux-gnueabihf is not your native platform. Package: binutils-arm-linux-gnueabihf-dbg Description-md5: 5f3fb1fe8ab9e0b0adfc0d09a83ce8bc Description-en: GNU binary utilities, for arm-linux-gnueabihf target (debug symbols) This package provides debug symbols for binutils-arm-linux-gnueabihf. Package: binutils-common Description-md5: 4ccec6ceb2c180320ed503f61b81ec4b Description-en: Common files for the GNU assembler, linker and binary utilities This package contains the localization files used by binutils packages for various target architectures and parts of the binutils documentation. It is not useful on its own. Package: binutils-dbg Description-md5: 77de33f2070a32c149f134259ecaad7a Description-en: GNU assembler, linker and binary utilities(debug symbols) This package provides debug symbols for binutils. Package: binutils-dev Description-md5: ddc22c04156534b000b4f021b88a6023 Description-en: GNU binary utilities (BFD development files) This package includes header files and static libraries necessary to build programs which use the GNU BFD library, which is part of binutils. Note that building Debian packages which depend on the shared libbfd is Not Allowed. Package: binutils-doc Description-md5: 61fd9f95707b9eb9ad8fe9b13a862636 Description-en: Documentation for the GNU assembler, linker and binary utilities This package consists of the documentation for the GNU assembler, linker and binary utilities in info format. Package: binutils-i686-gnu Description-md5: 24fd0e408469563945d7b1cfaa26f7a4 Description-en: GNU binary utilities, for i686-gnu target This package provides GNU assembler, linker and binary utilities for the i686-gnu target. . You don't need this package unless you plan to cross-compile programs for i686-gnu and i686-gnu is not your native platform. Package: binutils-i686-gnu-dbg Description-md5: 7fa23a1128d32cddc515c64d985711d8 Description-en: GNU binary utilities, for i686-gnu target (debug symbols) This package provides debug symbols for binutils-i686-gnu. Package: binutils-i686-linux-gnu Description-md5: a79ff2c9e374ae45436dd8a2f345ead9 Description-en: GNU binary utilities, for i686-linux-gnu target This package provides GNU assembler, linker and binary utilities for the i686-linux-gnu target. . You don't need this package unless you plan to cross-compile programs for i686-linux-gnu and i686-linux-gnu is not your native platform. Package: binutils-i686-linux-gnu-dbg Description-md5: f9e2b93b0081f6e9f8ef3142302562df Description-en: GNU binary utilities, for i686-linux-gnu target (debug symbols) This package provides debug symbols for binutils-i686-linux-gnu. Package: binutils-loongarch64-linux-gnu Description-md5: e12630a1ca99aee76f281ee7cbe918cc Description-en: GNU binary utilities, for loongarch64-linux-gnu target This package provides GNU assembler, linker and binary utilities for the loongarch64-linux-gnu target. . You don't need this package unless you plan to cross-compile programs for loongarch64-linux-gnu and loongarch64-linux-gnu is not your native platform. Package: binutils-loongarch64-linux-gnu-dbg Description-md5: bc5ff14fa06d94710490a1c164f1c3b0 Description-en: GNU binary utilities, for loongarch64-linux-gnu target (debug symbols) This package provides debug symbols for binutils-loongarch64-linux-gnu. Package: binutils-multiarch Description-md5: f9de0df7e70bff89b6d3519f04688470 Description-en: Binary utilities that support multi-arch targets The programs in this package are used to manipulate binary and object files that may have been created on other architectures. This package is primarily for multi-architecture developers and cross-compilers and is not needed by normal users or developers. Note that a cross-assembling version of gas is not included in this package, just the binary utilities. . NORMAL USERS SHOULD NOT INSTALL THIS PACKAGE. It's meant only for those requiring support for reading info from binaries from other architectures. Package: binutils-multiarch-dbg Description-md5: 061b51a454c349a8731681b9db245269 Description-en: Binary utilities that support multi-arch targets (debug symbols) This package provides debug symbols for binutils-multiarch. Package: binutils-multiarch-dev Description-md5: adf07629018b12b2492a658992c9a6a5 Description-en: GNU binary utilities that support multi-arch targets (BFD development files) This package includes header files, static and shared libraries necessary to build programs which use the GNU BFD library for multi-arch targets, which is part of binutils. Note that building Debian packages which depend on the shared libbfd is Not Allowed. . NORMAL USERS SHOULD NOT INSTALL THIS PACKAGE. It's meant only for those requiring support for reading info from binaries from other architectures. Package: binutils-powerpc-linux-gnu Description-md5: 27ff7dc3671a44b2b760c410b360f60d Description-en: GNU binary utilities, for powerpc-linux-gnu target This package provides GNU assembler, linker and binary utilities for the powerpc-linux-gnu target. . You don't need this package unless you plan to cross-compile programs for powerpc-linux-gnu and powerpc-linux-gnu is not your native platform. Package: binutils-powerpc-linux-gnu-dbg Description-md5: 961df13d4c2eeb6f5486a5ac13511694 Description-en: GNU binary utilities, for powerpc-linux-gnu target (debug symbols) This package provides debug symbols for binutils-powerpc-linux-gnu. Package: binutils-powerpc64le-linux-gnu Description-md5: 77690e6e34c8eb2ce8aa69b8fc01d9ef Description-en: GNU binary utilities, for powerpc64le-linux-gnu target This package provides GNU assembler, linker and binary utilities for the powerpc64le-linux-gnu target. . You don't need this package unless you plan to cross-compile programs for powerpc64le-linux-gnu and powerpc64le-linux-gnu is not your native platform. Package: binutils-powerpc64le-linux-gnu-dbg Description-md5: e85c7ee02c52a86e214843dd18632480 Description-en: GNU binary utilities, for powerpc64le-linux-gnu target (debug symbols) This package provides debug symbols for binutils-powerpc64le-linux-gnu. Package: binutils-riscv64-linux-gnu Description-md5: 030299bc1daf6eba16c06b76d0cd4a53 Description-en: GNU binary utilities, for riscv64-linux-gnu target This package provides GNU assembler, linker and binary utilities for the riscv64-linux-gnu target. . You don't need this package unless you plan to cross-compile programs for riscv64-linux-gnu and riscv64-linux-gnu is not your native platform. Package: binutils-riscv64-linux-gnu-dbg Description-md5: 1ca6a2cb739bd3daa03246115653b8d0 Description-en: GNU binary utilities, for riscv64-linux-gnu target (debug symbols) This package provides debug symbols for binutils-riscv64-linux-gnu. Package: binutils-s390x-linux-gnu Description-md5: fbec9c58067c885ede097ea1450a6669 Description-en: GNU binary utilities, for s390x-linux-gnu target This package provides GNU assembler, linker and binary utilities for the s390x-linux-gnu target. . You don't need this package unless you plan to cross-compile programs for s390x-linux-gnu and s390x-linux-gnu is not your native platform. Package: binutils-s390x-linux-gnu-dbg Description-md5: 34906c8686c1901657eae6e2ffbf4fbe Description-en: GNU binary utilities, for s390x-linux-gnu target (debug symbols) This package provides debug symbols for binutils-s390x-linux-gnu. Package: binutils-sparc-linux-gnu Description-md5: 9222d33fa308a7cb5d6b749faea45093 Description-en: GNU binary utilities, for sparc-linux-gnu target This package provides GNU assembler, linker and binary utilities for the sparc-linux-gnu target. . You don't need this package unless you plan to cross-compile programs for sparc-linux-gnu and sparc-linux-gnu is not your native platform. Package: binutils-sparc-linux-gnu-dbg Description-md5: bfb9cbe49c12949fc2eb4671ffc8ef03 Description-en: GNU binary utilities, for sparc-linux-gnu target (debug symbols) This package provides debug symbols for binutils-sparc-linux-gnu. Package: binutils-x86-64-gnu Description-md5: 61da8859cdfff1dd2e7207d3946c0439 Description-en: GNU binary utilities, for x86-64-gnu target This package provides GNU assembler, linker and binary utilities for the x86-64-gnu target. . You don't need this package unless you plan to cross-compile programs for x86-64-gnu and x86-64-gnu is not your native platform. Package: binutils-x86-64-gnu-dbg Description-md5: 66528c56092965f3fe0b88365454035d Description-en: GNU binary utilities, for x86-64-gnu target (debug symbols) This package provides debug symbols for binutils-x86-64-gnu. Package: binutils-x86-64-linux-gnu Description-md5: f1a6cb2c801dffeb3efc5a51449d0072 Description-en: GNU binary utilities, for x86-64-linux-gnu target This package provides GNU assembler, linker and binary utilities for the x86-64-linux-gnu target. . You don't need this package unless you plan to cross-compile programs for x86-64-linux-gnu and x86-64-linux-gnu is not your native platform. Package: binutils-x86-64-linux-gnu-dbg Description-md5: 9ae2ff4892c54c669a7b426fbcc946a7 Description-en: GNU binary utilities, for x86-64-linux-gnu target (debug symbols) This package provides debug symbols for binutils-x86-64-linux-gnu. Package: binutils-x86-64-linux-gnux32 Description-md5: 62ae79d9e154410f6678ab69c09b357c Description-en: GNU binary utilities, for x86-64-linux-gnux32 target This package provides GNU assembler, linker and binary utilities for the x86-64-linux-gnux32 target. . You don't need this package unless you plan to cross-compile programs for x86-64-linux-gnux32 and x86-64-linux-gnux32 is not your native platform. Package: binutils-x86-64-linux-gnux32-dbg Description-md5: 221d8face48635e6f8304bf2d57a6107 Description-en: GNU binary utilities, for x86-64-linux-gnux32 target (debug symbols) This package provides debug symbols for binutils-x86-64-linux-gnux32. Package: bsdextrautils Description-md5: 61ff4e9f9a6cd494351f0af8d84ab370 Description-en: extra utilities from 4.4BSD-Lite This package contains some extra BSD utilities: col, colcrt, colrm, column, hd, hexdump, look, ul. Other BSD utilities are provided by bsdutils and calendar. Package: bsdutils Description-md5: 07a52b485dd8e72c97ccec74c54564a0 Description-en: basic utilities from 4.4BSD-Lite This package contains the bare minimum of BSD utilities needed for a Debian system: logger, renice, script, scriptlive, scriptreplay and wall. The remaining standard BSD utilities are provided by bsdextrautils. Package: btrfs-progs Description-md5: df6e8f26b97f7706fc62b4566261d179 Description-en: Checksumming Copy on Write Filesystem utilities Btrfs is a copy on write filesystem for Linux aimed at implementing advanced features while focusing on fault tolerance, repair and easy administration. . This package contains utilities (mkfs, fsck) used to work with btrfs and an utility (btrfs-convert) to make a btrfs filesystem from an ext3. Package: build-essential Description-md5: 90ef0ef86cafda0bd16f746eb621d9da Description-en: Informational list of build-essential packages If you do not plan to build Debian packages, you don't need this package. Starting with dpkg (>= 1.14.18) this package is required for building Debian packages. . This package contains an informational list of packages which are considered essential for building Debian packages. This package also depends on the packages on that list, to make it easy to have the build-essential packages installed. . If you have this package installed, you only need to install whatever a package specifies as its build-time dependencies to build the package. Conversely, if you are determining what your package needs to build-depend on, you can always leave out the packages this package depends on. . This package is NOT the definition of what packages are build-essential; the real definition is in the Debian Policy Manual. This package contains merely an informational list, which is all most people need. However, if this package and the manual disagree, the manual is correct. Package: cpp-15 Description-md5: 93a75b5e1f4b43c36eba0239b6fab6a3 Description-en: GNU C preprocessor A macro processor that is used automatically by the GNU C compiler to transform programs before actual compilation. . This package has been separated from gcc for the benefit of those who require the preprocessor but not the compiler. Package: cpp-15-doc Description-md5: 22a9ba311e91d8d744a9e4df2030d2bf Description-en: Documentation for the GNU C preprocessor (cpp) Documentation for the GNU C preprocessor in info format. Package: cpp-15-for-build Description-md5: 4d867f66a5170c25af70c1bda2672d33 Description-en: GNU C preprocessor for the build architecture A macro processor that is used automatically by the GNU C compiler to transform programs before actual compilation. . This package has been separated from gcc for the benefit of those who require the preprocessor configured for the build architecture but not the compiler. . This is a dependency package. Package: cpp-15-for-host Description-md5: bdce3f8f67a0382ae150b074db5ebb6f Description-en: GNU C preprocessor for the host architecture A macro processor that is used automatically by the GNU C compiler to transform programs before actual compilation. . This package has been separated from gcc for the benefit of those who require the preprocessor configured for the host architecture but not the compiler. . When using this package, tools must be invoked with an architecture prefix. . This is a dependency package. Package: cpp-15-x86-64-linux-gnu Description-md5: 43b850052510e8ce407b526ada2b0877 Description-en: GNU C preprocessor for x86_64-linux-gnu A macro processor that is used automatically by the GNU C compiler to transform programs before actual compilation. . This package has been separated from gcc for the benefit of those who require the preprocessor configured for x86_64-linux-gnu architecture but not the compiler. Package: crossbuild-essential-arm64 Description-md5: 9b2629bcd07961cfcb27934f1371078a Description-en: Informational list of cross-build-essential packages If you do not plan to cross build Debian packages, you don't need this package. Starting with sbuild (>= 0.63.0) this package is required for cross building Debian packages in a chroot. . This package contains an informational list of packages which are considered essential for cross building Debian packages. This package also depends on the packages on that list, to make it easy to have the cross-build-essential packages installed. . If you have this package installed, you only need to install whatever a package specifies as its build-time dependencies to cross build the package. Conversely, if you are determining what your package needs to build-depend on, you can always leave out the packages this package depends on. Package: crossbuild-essential-armhf Description-md5: 9b2629bcd07961cfcb27934f1371078a Description-en: Informational list of cross-build-essential packages If you do not plan to cross build Debian packages, you don't need this package. Starting with sbuild (>= 0.63.0) this package is required for cross building Debian packages in a chroot. . This package contains an informational list of packages which are considered essential for cross building Debian packages. This package also depends on the packages on that list, to make it easy to have the cross-build-essential packages installed. . If you have this package installed, you only need to install whatever a package specifies as its build-time dependencies to cross build the package. Conversely, if you are determining what your package needs to build-depend on, you can always leave out the packages this package depends on. Package: crossbuild-essential-ppc64el Description-md5: 9b2629bcd07961cfcb27934f1371078a Description-en: Informational list of cross-build-essential packages If you do not plan to cross build Debian packages, you don't need this package. Starting with sbuild (>= 0.63.0) this package is required for cross building Debian packages in a chroot. . This package contains an informational list of packages which are considered essential for cross building Debian packages. This package also depends on the packages on that list, to make it easy to have the cross-build-essential packages installed. . If you have this package installed, you only need to install whatever a package specifies as its build-time dependencies to cross build the package. Conversely, if you are determining what your package needs to build-depend on, you can always leave out the packages this package depends on. Package: crossbuild-essential-riscv64 Description-md5: 9b2629bcd07961cfcb27934f1371078a Description-en: Informational list of cross-build-essential packages If you do not plan to cross build Debian packages, you don't need this package. Starting with sbuild (>= 0.63.0) this package is required for cross building Debian packages in a chroot. . This package contains an informational list of packages which are considered essential for cross building Debian packages. This package also depends on the packages on that list, to make it easy to have the cross-build-essential packages installed. . If you have this package installed, you only need to install whatever a package specifies as its build-time dependencies to cross build the package. Conversely, if you are determining what your package needs to build-depend on, you can always leave out the packages this package depends on. Package: crossbuild-essential-s390x Description-md5: 9b2629bcd07961cfcb27934f1371078a Description-en: Informational list of cross-build-essential packages If you do not plan to cross build Debian packages, you don't need this package. Starting with sbuild (>= 0.63.0) this package is required for cross building Debian packages in a chroot. . This package contains an informational list of packages which are considered essential for cross building Debian packages. This package also depends on the packages on that list, to make it easy to have the cross-build-essential packages installed. . If you have this package installed, you only need to install whatever a package specifies as its build-time dependencies to cross build the package. Conversely, if you are determining what your package needs to build-depend on, you can always leave out the packages this package depends on. Package: dkms Description-md5: 232c475017017fa9b762bad26978f5d1 Description-en: Dynamic Kernel Module System (DKMS) DKMS is a framework designed to allow individual kernel modules to be upgraded without changing the whole kernel. It is also very easy to rebuild modules as you upgrade kernels. Package: dmz-cursor-theme Description-md5: 486c37c0e4890a318fb8856ce996d5b9 Description-en: Style neutral, scalable cursor theme This package contains the DMZ cursor themes, which are derived from the Industrial theme developed for the Ximian GNOME desktop. Black and white cursors are provided, in scalable formats. Package: eject Description-md5: 6a1f8e492b35e1b9dad2ebd6248c2167 Description-en: ejects CDs and operates CD-Changers under Linux This program will eject CD-ROMs (assuming your drive supports the CDROMEJECT ioctl). It also allows setting the autoeject feature. . On supported ATAPI/IDE multi-disc CD-ROM changers, it allows changing the active disc. . You can also use eject to properly disconnect external mass-storage devices like digital cameras or portable music players. Package: fdisk Description-md5: b6c3042a1fbe1359fb969423bc457ff2 Description-en: collection of partitioning utilities This package contains the classic fdisk, sfdisk and cfdisk partitioning utilities from the util-linux suite. . The utilities included in this package allow you to partition your hard disk. The utilities supports both modern and legacy partition tables (eg. GPT, MBR, etc). . The fdisk utility is the classical text-mode utility. The cfdisk utility gives a more userfriendly curses based interface. The sfdisk utility is mostly for automation and scripting uses. Package: file Description-md5: 5d23749cc510bff3ff8aca8793a9803e Description-en: Recognize the type of data in a file using "magic" numbers The file command is "a file type guesser", a command-line tool that tells you in words what kind of data a file contains. . This package contains the file program itself. Package: g++-15 Description-md5: 0a3fad3367cb994bd16c61b0e16a8b9c Description-en: GNU C++ compiler This is the GNU C++ compiler, a fairly portable optimizing compiler for C++. Package: g++-15-for-build Description-md5: 6b662a2a3907f28ed9a0e2ac6a55d3ea Description-en: GNU C++ compiler for the build architecture This is the GNU C++ compiler, a fairly portable optimizing compiler for C++. . This package contains C++ cross-compiler for arch_gnu architecture. . This is a dependency package. Package: g++-15-for-host Description-md5: 9390f1b2980c545f669a0b8b8d5b11e0 Description-en: GNU C++ compiler for the host architecture This is the GNU C++ compiler, a fairly portable optimizing compiler for C++. . This package contains C++ cross-compiler for the host architecture. . When using this package, tools must be invoked with an architecture prefix. . This is a dependency package. Package: g++-15-multilib Description-md5: 291f2f15035d2eb62358c5157bbae10c Description-en: GNU C++ compiler (multilib support) This is the GNU C++ compiler, a fairly portable optimizing compiler for C++. . This is a dependency package, depending on development packages for the non-default multilib architecture(s). Package: g++-15-x86-64-linux-gnu Description-md5: f28641d421c551d47a5e989009efe119 Description-en: GNU C++ compiler for x86_64-linux-gnu architecture This is the GNU C++ compiler, a fairly portable optimizing compiler for C++. . This package contains C++ cross-compiler for x86_64-linux-gnu architecture. Package: ga68-15-doc Description-md5: 9a8b7de6d96c2639a2c30910120b4bb2 Description-en: Documentation for the GNU Algol 68 compiler (ga68) Documentation for the GNU Algol 68 compiler in HTML and info format. Package: gcc-14-base Description-md5: b6e93638a6d08ea7a18929d7cf078e5d Description-en: GCC, the GNU Compiler Collection (base package) This package contains files common to all languages and libraries contained in the GNU Compiler Collection (GCC). Package: gcc-15 Description-md5: 394374e688b1afb3af5f419895d29698 Description-en: GNU C compiler This is the GNU C compiler, a fairly portable optimizing compiler for C. Package: gcc-15-base Description-md5: b6e93638a6d08ea7a18929d7cf078e5d Description-en: GCC, the GNU Compiler Collection (base package) This package contains files common to all languages and libraries contained in the GNU Compiler Collection (GCC). Package: gcc-15-doc Description-md5: bf320d6d806b62ff03b567626d36b1fb Description-en: Documentation for the GNU compilers (gcc, gobjc, g++) Documentation for the GNU compilers in info format. Package: gcc-15-for-build Description-md5: 1231e8563c440c0230388f9db0660a3c Description-en: GNU C compiler for the build architecture This is the GNU C compiler, a fairly portable optimizing compiler for C. . This is a dependency package. Package: gcc-15-for-host Description-md5: 2f6f77eeb03535ba77299cfe1a0ef756 Description-en: GNU C compiler for the host architecture This is the GNU C compiler, a fairly portable optimizing compiler for C. . When using this package, tools must be invoked with an architecture prefix. . This is a dependency package. Package: gcc-15-multilib Description-md5: d1bddfa375b62324197c575c04fb2e4e Description-en: GNU C compiler (multilib support) This is the GNU C compiler, a fairly portable optimizing compiler for C. . This is a dependency package, depending on development packages for the non-default multilib architecture(s). Package: gcc-15-x86-64-linux-gnu Description-md5: 7bf4c826102db622ef3a4d867a96ef4e Description-en: GNU C compiler for the x86_64-linux-gnu architecture This is the GNU C compiler for the x86_64-linux-gnu architecture, a fairly portable optimizing compiler for C. Package: gfortran-15 Description-md5: 5dd93c5d21d0717205bc5a3b538b0ca2 Description-en: GNU Fortran compiler This is the GNU Fortran compiler, which compiles Fortran on platforms supported by the gcc compiler. It uses the gcc backend to generate optimized code. Package: gfortran-15-doc Description-md5: 17a01a9ada93e104865a01e6615e2401 Description-en: Documentation for the GNU Fortran compiler (gfortran) Documentation for the GNU Fortran compiler in info format. Package: gfortran-15-for-build Description-md5: 748b70d5e078f51a0a1a8810f97e7888 Description-en: GNU Fortran compiler for the build architecture This is the GNU Fortran compiler for the build architecture, which compiles Fortran on platforms supported by the gcc compiler. It uses the gcc backend to generate optimized code. . This is a dependency package. Package: gfortran-15-for-host Description-md5: 45750004f61e98b776fd803bf4361bf0 Description-en: GNU Fortran compiler for the host architecture This is the GNU Fortran compiler for the host architecture, which compiles Fortran on platforms supported by the gcc compiler. It uses the gcc backend to generate optimized code. . When using this package, tools must be invoked with an architecture prefix. . This is a dependency package. Package: gfortran-15-multilib Description-md5: ad5cf91f123889c593b105572b4a958c Description-en: GNU Fortran compiler (multilib support) This is the GNU Fortran compiler, which compiles Fortran on platforms supported by the gcc compiler. . This is a dependency package, depending on development packages for the non-default multilib architecture(s). Package: gfortran-15-x86-64-linux-gnu Description-md5: d58c4dfdb182f598353d755dda19253d Description-en: GNU Fortran compiler for the x86_64-linux-gnu architecture This is the GNU Fortran compiler for the x86_64-linux-gnu architecture, which compiles Fortran on platforms supported by the gcc compiler. It uses the gcc backend to generate optimized code. Package: gir1.2-girepository-3.0 Description-md5: 72841bba9afa24146f8f7c26846f869a Description-en: Introspection data for GIRepository library, API version 3.0 GObject Introspection is a project for providing machine readable introspection data of the API of C libraries. This introspection data can be used in several different use cases, for example automatic code generation for bindings, API verification and documentation generation. . This package contains the introspection data for the GIRepository library, which can be used to manipulate the search path used by language bindings and load introspection data. Package: gir1.2-girepository-3.0-dev Description-md5: b0d8e7489d5f7bcf0befc859b3f8d7af Description-en: GIR XML for GIRepository library, API version 3.0 GObject Introspection is a project for providing machine readable introspection data of the API of C libraries. This introspection data can be used in several different use cases, for example automatic code generation for bindings, API verification and documentation generation. . This package contains the introspection data for the GIRepository library, in the GIR XML format used to generate bindings for static languages like C++, D and Haskell. Package: gir1.2-glib-2.0 Description-md5: e3ee82927c5a64d9d4a153035675edf2 Description-en: Introspection data for GLib, GObject, Gio and GModule GObject Introspection is a project for providing machine readable introspection data of the API of C libraries. This introspection data can be used in several different use cases, for example automatic code generation for bindings, API verification and documentation generation. . This package contains the introspection data for the GLib, GObject, GModule and Gio libraries, in the typelib format used to generate bindings for dynamic languages like JavaScript and Python. Package: gir1.2-glib-2.0-dev Description-md5: daaf168898f3621e3912b9d66ac0654b Description-en: GIR XML for GLib, GObject, Gio and GModule GObject Introspection is a project for providing machine readable introspection data of the API of C libraries. This introspection data can be used in several different use cases, for example automatic code generation for bindings, API verification and documentation generation. . This package contains the introspection data for the GLib, GObject, GModule and Gio libraries, in the GIR XML format used to generate bindings for static languages like C++, D and Haskell. Package: gir1.2-javascriptcoregtk-4.1 Description-md5: 027f494c193b6c1ec30c4f4e3ef630b4 Description-en: JavaScript engine library from WebKitGTK - GObject introspection data JavaScriptCore is the JavaScript engine used in WebKit. It consists of the following building blocks: lexer, parser, start-up interpreter (LLInt), baseline JIT, a low-latency optimizing JIT (DFG), and a high-throughput optimizing JIT (FTL). . This build comes from the GTK port of WebKit (API version 4.1). . This package contains the introspection data, which can be used by packages using the GIRepository format to generate dynamic bindings. Package: gir1.2-javascriptcoregtk-6.0 Description-md5: 17d7c8ce9189cbe47a247c5c3c8c7f0c Description-en: JavaScript engine library from WebKitGTK - GObject introspection data JavaScriptCore is the JavaScript engine used in WebKit. It consists of the following building blocks: lexer, parser, start-up interpreter (LLInt), baseline JIT, a low-latency optimizing JIT (DFG), and a high-throughput optimizing JIT (FTL). . This build comes from the GTK port of WebKit (API version 6.0). . This package contains the introspection data, which can be used by packages using the GIRepository format to generate dynamic bindings. Package: gir1.2-webkit-6.0 Description-md5: 3d5547cc72c351c9257ef24f4ffdee08 Description-en: Web content engine library for GTK - GObject introspection data WebKit is a web content engine, derived from KHTML and KJS from KDE, and used primarily in Apple's Safari browser. It is made to be embedded in other applications, such as mail readers, or web browsers. . It is able to display content such as HTML, SVG, XML, and others. It also supports DOM, XMLHttpRequest, XSLT, CSS, JavaScript/ECMAScript and more. . WebKitGTK is a WebKit port designed to be used in GTK applications. This build provides version 6.0 of the API and uses libsoup v3 for the networking stack and the GTK 4 widget toolkit. . This package contains introspection data, which can be used by packages using the GIRepository format to generate dynamic bindings. Package: gir1.2-webkit2-4.1 Description-md5: 3f163120226ab20f9e8445c6a1d20988 Description-en: Web content engine library for GTK - GObject introspection data WebKit is a web content engine, derived from KHTML and KJS from KDE, and used primarily in Apple's Safari browser. It is made to be embedded in other applications, such as mail readers, or web browsers. . It is able to display content such as HTML, SVG, XML, and others. It also supports DOM, XMLHttpRequest, XSLT, CSS, JavaScript/ECMAScript and more. . WebKitGTK is a WebKit port designed to be used in GTK applications. This build provides version 4.1 of the API and uses libsoup v3 for the networking stack and the GTK 3 widget toolkit. . This package contains introspection data, which can be used by packages using the GIRepository format to generate dynamic bindings. Package: girepository-tools Description-md5: c2408aca51f77a5d47ae47ed84aa9f0d Description-en: Tools for working with GObject-Introspection repositories GLib is a library containing many useful C routines for things such as trees, hashes, lists, and strings. It is a useful general-purpose C library used by projects such as GTK, GIMP, and GNOME. . This package contains developer-oriented command-line tools for working with GObject-Introspection typelibs and GIR XML, which are used to provide language bindings and documentation for GLib-based libraries: . * x86_64-linux-gnu-gi-compile-repository * x86_64-linux-gnu-gi-decompile-typelib * x86_64-linux-gnu-gi-inspect-typelib . When used via this package, these tools must be invoked with their host-architecture-specific names. . For command-line compatibility with non-Debian-based GLib packaging, the libglib2.0-dev package also provides versions of these tools for the system's primary architecture, named without the architecture prefix. Package: glibc-doc Description-md5: 24409145cfc786fece1c0ace7901b517 Description-en: GNU C Library: Documentation Contains the complete GNU C Library ChangeLog. The GNU C Library Reference manual has been moved into glibc-doc-reference for licensing reasons. Package: gnu-coreutils Description-md5: d0d975dec3625409d24be1238cede238 Description-en: GNU core utilities This package contains the basic file, shell and text manipulation utilities which are expected to exist on every operating system. . Specifically, this package includes: arch base64 basename cat chcon chgrp chmod chown chroot cksum comm cp csplit cut date dd df dir dircolors dirname du echo env expand expr factor false flock fmt fold groups head hostid id install join link ln logname ls md5sum mkdir mkfifo mknod mktemp mv nice nl nohup nproc numfmt od paste pathchk pinky pr printenv printf ptx pwd readlink realpath rm rmdir runcon sha*sum seq shred sleep sort split stat stty sum sync tac tail tee test timeout touch tr true truncate tsort tty uname unexpand uniq unlink users vdir wc who whoami yes Package: icu-devtools Description-md5: 4f58797462ac478415b579bf552abff4 Description-en: Development utilities for International Components for Unicode ICU is a C++ and C library that provides robust and full-featured Unicode and locale support. This package contains programs used to manipulate data files found in the ICU sources and is a dependency of libicu-dev. End users would generally not need to install this package. Package: icu-doc Description-md5: 85b63ef20f81e6ed56386e76f65f4297 Description-en: API documentation for ICU classes and functions ICU is a C++ and C library that provides robust and full-featured Unicode and locale support. This package contains HTML files documenting the ICU APIs. Package: initramfs-tools Description-md5: f406a6ad4452bdc36e9957a711143c2e Description-en: generic modular initramfs generator (automation) This package builds a bootable initramfs for Linux kernel packages. The initramfs is loaded along with the kernel and is responsible for mounting the root filesystem and starting the main init system. Package: initramfs-tools-bin Description-md5: 1f5515e186e08dbfff552d7af6b01ca8 Description-en: generic modular initramfs generator (binary tools) This package contains binaries used inside the initramfs images generated by initramfs-tools. It also contains the unmkinitramfs program that can be used to unpack an initramfs image. Package: initramfs-tools-core Description-md5: 8d2ce4976ab4fb33b898ed3006a086fa Description-en: generic modular initramfs generator (core tools) This package contains the mkinitramfs program that can be used to create a bootable initramfs for a Linux kernel. The initramfs should be loaded along with the kernel and is then responsible for mounting the root filesystem and starting the main init system. Package: jpeg-xl-doc Description-md5: 44d36dcb17e9f8a2f9d692a76aa7613e Description-en: JPEG XL Image Coding System - "JXL" (documentation) The JPEG XL Image Coding System (ISO/IEC 18181) is a lossy and lossless image compression format. It has a rich feature set and is particularly optimized for responsive web environments, so that content renders well on a wide range of devices. Moreover, it includes several features that help transition from the legacy JPEG format. . This package installs the doxygen documentation. Package: lib32asan8 Description-md5: 21a3c42c398c2fff43ee9449787256e4 Description-en: AddressSanitizer -- a fast memory error detector (32bit) AddressSanitizer (ASan) is a fast memory error detector. It finds use-after-free and {heap,stack,global}-buffer overflow bugs in C/C++ programs. Package: lib32atomic1 Description-md5: 4b9cd7e59833a54167ec848b4c3d9e48 Description-en: support library providing __atomic built-in functions (32bit) library providing __atomic built-in functions. When an atomic call cannot be turned into lock-free instructions, GCC will make calls into this library. Package: lib32gcc-14-dev Description-md5: 50201ee0230693f6a9313820d5854393 Description-en: GCC support library (32 bit development files) This package contains the headers and static library files necessary for building C programs which use libgcc, libgomp, libquadmath, libssp or libitm. Package: lib32gcc-15-dev Description-md5: 50201ee0230693f6a9313820d5854393 Description-en: GCC support library (32 bit development files) This package contains the headers and static library files necessary for building C programs which use libgcc, libgomp, libquadmath, libssp or libitm. Package: lib32gcc-s1 Description-md5: a31c67d540f86442c895f2663cb4d5c9 Description-en: GCC support library (32 bit Version) Shared version of the support library, a library of internal subroutines that GCC uses to overcome shortcomings of particular machines, or special needs for some languages. Package: lib32gfortran-15-dev Description-md5: 6b37f3090548ca719a28233db2276849 Description-en: Runtime library for GNU Fortran applications (32bit development files) This package contains the headers and static library files needed to build GNU Fortran applications. Package: lib32gfortran5 Description-md5: 6b1141cbf03c78b07b329d00c2e7823f Description-en: Runtime library for GNU Fortran applications (32bit) Library needed for GNU Fortran applications linked against the shared library. Package: lib32go-14-dev Description-md5: 0d206625198081e48dfdda7b339c3c73 Description-en: Runtime library for GNU Go applications (32bit development files) This package contains the headers and static library files needed to build GNU Go applications. Package: lib32go-15-dev Description-md5: 0d206625198081e48dfdda7b339c3c73 Description-en: Runtime library for GNU Go applications (32bit development files) This package contains the headers and static library files needed to build GNU Go applications. Package: lib32go23 Description-md5: 7174520aedfeba49e54b8c36f55b7e95 Description-en: Runtime library for GNU Go applications (32bit) Library needed for GNU Go applications linked against the shared library. Package: lib32go24 Description-md5: 7174520aedfeba49e54b8c36f55b7e95 Description-en: Runtime library for GNU Go applications (32bit) Library needed for GNU Go applications linked against the shared library. Package: lib32gomp1 Description-md5: e631a6bc5701a04082ff06d4907faecf Description-en: GCC OpenMP (GOMP) support library (32bit) GOMP is an implementation of OpenMP for the C, C++, and Fortran compilers in the GNU Compiler Collection. Package: lib32itm1 Description-md5: dab7174f3ba5f3317b7d12b57522f05a Description-en: GNU Transactional Memory Library (32bit) GNU Transactional Memory Library (libitm) provides transaction support for accesses to the memory of a process, enabling easy-to-use synchronization of accesses to shared memory by several threads. Package: lib32quadmath0 Description-md5: d7a03dac94565e412ed600a16f543d54 Description-en: GCC Quad-Precision Math Library (32bit) A library, which provides quad-precision mathematical functions on targets supporting the __float128 datatype. The library is used to provide on such targets the REAL(16) type in the GNU Fortran compiler. Package: lib32stdc++-15-dev Description-md5: a197f2aec835e5fc6f8f76039d8a7c4e Description-en: GNU Standard C++ Library v3 (development files) This package contains the headers and static library files necessary for building C++ programs which use libstdc++. . libstdc++-v3 is a complete rewrite from the previous libstdc++-v2, which was included up to g++-2.95. The first version of libstdc++-v3 appeared in g++-3.0. Package: lib32stdc++6 Description-md5: 2124b81bef171d19a7c047c58ae7058f Description-en: GNU Standard C++ Library v3 (32 bit Version) This package contains an additional runtime library for C++ programs built with the GNU compiler. Package: lib32ubsan1 Description-md5: 00c57d4ccf298e90fae6bd6acdfad7ab Description-en: UBSan -- undefined behaviour sanitizer (32bit) UndefinedBehaviorSanitizer can be enabled via -fsanitize=undefined. Various computations will be instrumented to detect undefined behavior at runtime. Available for C and C++. Package: lib32z1 Description-md5: 8844cb824b8b6f7b621a350ef76f732a Description-en: compression library - 32 bit runtime zlib is a library implementing the deflate compression method found in gzip and PKZIP. This package includes a 32 bit version of the shared library. Package: lib32z1-dev Description-md5: 27ef0e2d5483e08c0554112669cfca90 Description-en: compression library - 32 bit - DO NOT USE EXCEPT FOR PACKAGING zlib is a library implementing the deflate compression method found in gzip and PKZIP. This package includes the development support files for building 32 bit applications. . This package should ONLY be used for building packages, users who do not need to build packages should use multiarch to install the relevant runtime. Package: libasan8 Description-md5: 04e20d522e263c6563c2ea719c87026f Description-en: AddressSanitizer -- a fast memory error detector AddressSanitizer (ASan) is a fast memory error detector. It finds use-after-free and {heap,stack,global}-buffer overflow bugs in C/C++ programs. Package: libatomic1 Description-md5: 16938852526fc26bdbcb46c18435ed08 Description-en: support library providing __atomic built-in functions library providing __atomic built-in functions. When an atomic call cannot be turned into lock-free instructions, GCC will make calls into this library. Package: libauthen-sasl-perl Description-md5: a3424e8b11b349db79d78bd4ac190a5d Description-en: Authen::SASL - SASL Authentication framework SASL is a generic mechanism for authentication used by several network protocols. Authen::SASL provides an implementation framework that all protocols should be able to share. . The framework allows different implementations of the connection class to be plugged in. At the time of writing there were two such plugins in Debian: - Authen::SASL::Perl (in this package) This module implements several mechanisms and is implemented entirely in Perl. - Authen::SASL::XS (in the libauthen-sasl-xs-perl package) This module uses the Cyrus SASL C-library (both version 1 and 2 are supported). Package: libbinutils Description-md5: 4b87c5b499514b3b039e5d7ef54f2682 Description-en: GNU binary utilities (private shared library) This package includes the private shared libraries libbfd and libopcodes. Package: libbinutils-dbg Description-md5: 0425bdd565e0f24ff26574c29f636dc0 Description-en: GNU binary utilities (private shared library, debug symbols) This package provides debug symbols for libbinutils. Package: libblkid-dev Description-md5: 7415f693bf9b8861c2b7f560fc52d6a4 Description-en: block device ID library - headers The blkid library allows system programs such as fsck and mount to quickly and easily find block devices by filesystem UUID or label. This allows system administrators to avoid specifying filesystems by hard-coded device names and use a logical naming system instead. . This package contains the development environment for the blkid library. Package: libblkid1 Description-md5: a511054d3223ae05280eebc8f3e2c80e Description-en: block device ID library The blkid library allows system programs such as fsck and mount to quickly and easily find block devices by filesystem UUID or label. This allows system administrators to avoid specifying filesystems by hard-coded device names and use a logical naming system instead. Package: libbtrfs-dev Description-md5: e8598608c683624a5f1109a9c22782a6 Description-en: Checksumming Copy on Write Filesystem utilities (development headers) Btrfs is a copy on write filesystem for Linux aimed at implementing advanced features while focusing on fault tolerance, repair and easy administration. . This package contains development headers for the libbtrfs library. Package: libbtrfs0t64 Description-md5: e1a67114fb8d61a749db3f5cbfdaf3eb Description-en: Checksumming Copy on Write Filesystem utilities (runtime library) Btrfs is a copy on write filesystem for Linux aimed at implementing advanced features while focusing on fault tolerance, repair and easy administration. . This package contains userspace shared code library libbtrfs. Package: libbtrfsutil-dev Description-md5: 05feaf392318f9d2d65109abecd5b17b Description-en: Checksumming Copy on Write Filesystem utilities (util development headers) Btrfs is a copy on write filesystem for Linux aimed at implementing advanced features while focusing on fault tolerance, repair and easy administration. . This package contains development headers for the libbtrfsutil library. Package: libbtrfsutil1t64 Description-md5: 67310d0977d15e5c6794978decdfe500 Description-en: Checksumming Copy on Write Filesystem utilities (runtime util library) Btrfs is a copy on write filesystem for Linux aimed at implementing advanced features while focusing on fault tolerance, repair and easy administration. . This package contains userspace shared code library libbtrfsutil. Package: libc-bin Description-md5: 23bffd7c48b5ed8394d07f8132ceb64c Description-en: GNU C Library: Binaries This package contains utility programs related to the GNU C Library. . * getconf: query system configuration variables * getent: get entries from administrative databases * iconv, iconvconfig: convert between character encodings * ldd, ldconfig: print/configure shared library dependencies * locale, localedef: show/generate locale definitions * tzselect, zdump, zic: select/dump/compile time zones Package: libc-dev-bin Description-md5: ca03135a9e423d461176f64ae28a6e5c Description-en: GNU C Library: Development binaries This package contains utility programs related to the GNU C Library development package. . * gencat: generate message catalogs Package: libc6 Description-md5: fc3001b0b90a1c8e6690b283a619d57f Description-en: GNU C Library: Shared libraries Contains the standard libraries that are used by nearly all programs on the system. This package includes shared versions of the standard C library and the standard math library, as well as many others. Package: libc6-dbg Description-md5: bbc98343da14bf76d4a45c2181fd8902 Description-en: GNU C Library: detached debugging symbols This package contains the detached debugging symbols for the GNU C library. Package: libc6-dev Description-md5: 1bbdc717d9acdb44db940928d570e749 Description-en: GNU C Library: Development Libraries and Header Files Contains the symlinks, headers, and object files needed to compile and link programs which use the standard C library. Package: libc6-dev-i386 Description-md5: 50cf6ae98f9a3cdef9c53b186287325f Description-en: GNU C Library: 32-bit development libraries for AMD64 Contains the symlinks and object files needed to compile and link programs which use the standard C library. This is the 32bit version of the library, meant for AMD64 systems. Package: libc6-dev-x32 Description-md5: 0859bbe63e876c4ed2ca05543b5d535f Description-en: GNU C Library: X32 ABI Development Libraries for AMD64 Contains the symlinks and object files needed to compile and link programs which use the standard C library. This is the X32 ABI version of the library, meant for amd64 systems. Package: libc6-i386 Description-md5: 126bea51eae6ba3832096d4d56bfd9d2 Description-en: GNU C Library: 32-bit shared libraries for AMD64 This package includes shared versions of the standard C library and the standard math library, as well as many others. This is the 32bit version of the library, meant for AMD64 systems. Package: libc6-x32 Description-md5: 010abf82e546e9de191aa54ef585d592 Description-en: GNU C Library: X32 ABI Shared libraries for AMD64 This package includes shared versions of the standard C library and the standard math library, as well as many others. This is the X32 ABI version of the library, meant for AMD64 systems. Package: libcap-dev Description-md5: 71a80949663716b327d81d7b814ba91a Description-en: POSIX 1003.1e capabilities (development) Libcap implements the user-space interfaces to the POSIX 1003.1e capabilities available in Linux kernels. These capabilities are a partitioning of the all powerful root privilege into a set of distinct privileges. . This package contains the development files. Package: libcap2 Description-md5: cd474c07928607f123b20712016d716e Description-en: POSIX 1003.1e capabilities (library) Libcap implements the user-space interfaces to the POSIX 1003.1e capabilities available in Linux kernels. These capabilities are a partitioning of the all powerful root privilege into a set of distinct privileges. . This package contains the shared library. Package: libcap2-bin Description-md5: f223f06c6e812dc45d4b21cbd8163d36 Description-en: POSIX 1003.1e capabilities (utilities) Libcap implements the user-space interfaces to the POSIX 1003.1e capabilities available in Linux kernels. These capabilities are a partitioning of the all powerful root privilege into a set of distinct privileges. . This package contains additional utilities. Package: libcc1-0 Description-md5: d8a62f43eef344a718f9c7152d75d70c Description-en: GCC cc1 plugin for GDB libcc1 is a plugin for GDB. Package: libctf-nobfd0 Description-md5: d6c110768780803ec3b63b3cfd3fefa3 Description-en: Compact C Type Format library (runtime, no BFD dependency) This package includes the libctf-nobfd shared library. The Compact C Type Format (CTF) is a way of representing information about a binary program Package: libctf-nobfd0-dbg Description-md5: dd801c6e69e4fc0ad925f6a62b61ed07 Description-en: Compact C Type Format library (debug symbols, no BFD dependency) This package includes the libctf-nobfd shared library. The Compact C Type Format (CTF) is a way of representing information about a binary program Package: libctf0 Description-md5: 72ceed17da4170356ec78923ed0461d3 Description-en: Compact C Type Format library (runtime, BFD dependency) This package includes the libctf shared library. The Compact C Type Format (CTF) is a way of representing information about a binary program Package: libctf0-dbg Description-md5: 5d13fc1067470af9e1868851895be93e Description-en: Compact C Type Format library (debug symbols, BFD dependency) This package includes the libctf shared library. The Compact C Type Format (CTF) is a way of representing information about a binary program Package: libfdisk-dev Description-md5: a2001aec023268fdcf5a0ff2b2688bd3 Description-en: fdisk partitioning library - headers The libfdisk library is used for manipulating partition tables. It is the core of the fdisk, cfdisk, and sfdisk tools. . This package contains the development environment for the fdisk library. Package: libfdisk1 Description-md5: 97986f600b6cd55d9613b5b8eac3b74a Description-en: fdisk partitioning library The libfdisk library is used for manipulating partition tables. It is the core of the fdisk, cfdisk, and sfdisk tools. Package: libga68-1 Description-md5: 5b7e5135ff8b2edbf39411219e7e6434 Description-en: GNU Algol 68 standard library (runtime library) This is the GNU Algol 68 standard library that comes with the ga68 compiler. Package: libga68-15-dev Description-md5: 9574aee072e6e6899fe754ed2347c9c0 Description-en: GNU Algol 68 standard library This is the Algol 68 standard library that comes with the ga68 compiler. Package: libgcc-14-dev Description-md5: 4ab7cb439b47e1d0796fbaf8447229ac Description-en: GCC support library (development files) This package contains the headers and static library files necessary for building C programs which use libgcc, libgomp, libquadmath, libssp or libitm. Package: libgcc-15-dev Description-md5: 4ab7cb439b47e1d0796fbaf8447229ac Description-en: GCC support library (development files) This package contains the headers and static library files necessary for building C programs which use libgcc, libgomp, libquadmath, libssp or libitm. Package: libgcc-s1 Description-md5: bbd60d723e97d8e06c04228ee4c76f10 Description-en: GCC support library Shared version of the support library, a library of internal subroutines that GCC uses to overcome shortcomings of particular machines, or special needs for some languages. Package: libgcobol-15-dev Description-md5: 1beb62506c556ed87d0ba541f9ba4f3b Description-en: GNU COBOL standard library This is the COBOL standard library that comes with the gcobol compiler. Package: libgcobol1 Description-md5: c971f050ff5daf13bb63cc1de52ddabd Description-en: GNU COBOL standard library (runtime library) This is the GNU COBOL standard library that comes with the gcobol compiler. Package: libgdiagnostics-15-dev Description-md5: 3b982c26f4b6aa3b430c9b0e3fbf47cd Description-en: GCC diagnostic-handling code wrapped into a library (development files) GCCs diagnostic-handling code covers things like - quoting pertinent source code (with a cache) - underlining points and ranges in the source code, possibly with labels - emitting fix-it hints - generating patches from fix-it hints - SARIF output Package: libgdiagnostics0 Description-md5: 823b01659af7e2a32d4932733dc7cf70 Description-en: GCC diagnostic-handling code wrapped into a library (shared library) GCCs diagnostic-handling code covers things like - quoting pertinent source code (with a cache) - underlining points and ranges in the source code, possibly with labels - emitting fix-it hints - generating patches from fix-it hints - SARIF output Package: libgfortran-15-dev Description-md5: 146f5739f84c8211389d84c7aa5bf949 Description-en: Runtime library for GNU Fortran applications (development files) This package contains the headers and static library files needed to build GNU Fortran applications. Package: libgfortran5 Description-md5: bb4b9e7dbbaa67e95441936718b11f39 Description-en: Runtime library for GNU Fortran applications Library needed for GNU Fortran applications linked against the shared library. Package: libgio-2.0-dev Description-md5: 9a7ce86f9cc5bfa3f95bff6d433aed17 Description-en: Development files for the GLib, GObject and GIO libraries GLib is a library containing many useful C routines for things such as trees, hashes, lists, and strings. It is a useful general-purpose C library used by projects such as GTK, GIMP, and GNOME. . This package contains development files for the main libraries included in the upstream GLib package: . * GLib: the core library with data structures and utilities * GThread: multi-threading support * GModule: dynamically-loadable modules * GObject: the object system * GIO: higher-level utilities built on GObject . The libglib2.0-dev package provides a more complete set of development files. Package: libgio-2.0-dev-bin Description-md5: 6feec5e34cfe70ffe483a150d1abcf8a Description-en: Development utilities for GLib, GObject and GIO libraries GLib is a library containing many useful C routines for things such as trees, hashes, lists, and strings. It is a useful general-purpose C library used by projects such as GTK, GIMP, and GNOME. . This package contains several developer-oriented command-line tools used when compiling packages that use GLib: . * gdbus-codegen * glib-compile-resources * glib-genmarshal * glib-gettextize * glib-mkenums * gobject-query * gtester (deprecated) * gtester-report (deprecated) . Other command-line tools can be found in the libglib2.0-bin package. . If the non-architecture-prefixed versions of the gi-compile-repository, gi-decompile-typelib and gi-inspect-typelib tools are required, please install the libglib2.0-dev package, but consider using the architecture-prefixed versions in the girepository-tools package instead. Package: libgirepository-2.0-0 Description-md5: affc8d6f4ac284342f4f650559090e49 Description-en: GLib runtime library for handling GObject introspection data GLib is a library containing many useful C routines for things such as trees, hashes, lists, and strings. It is a useful general-purpose C library used by projects such as GTK+, GIMP, and GNOME. . This package contains the shared library used by language bindings such as PyGObject and gjs to call GObject methods. Package: libgirepository-2.0-dev Description-md5: 9313f335ccc0dff978cbb0cb3de2c8ef Description-en: Development files for the GObject introspection library GLib is a library containing many useful C routines for things such as trees, hashes, lists, and strings. It is a useful general-purpose C library used by projects such as GTK+, GIMP, and GNOME. . This package is needed to compile programs against libgirepository-2.0-0. . GObject-Introspection metadata for this library is not included here, and can be found in the gir1.2-girepository-3.0-dev package. Package: libglib2.0-0t64 Description-md5: f44de6293be1aa02cd13d73f591580a9 Description-en: GLib library of C routines GLib is a library containing many useful C routines for things such as trees, hashes, lists, and strings. It is a useful general-purpose C library used by projects such as GTK+, GIMP, and GNOME. . This package contains the shared libraries. Package: libglib2.0-bin Description-md5: 0f7421bfdb5f46c0b8e82a359df1ab1a Description-en: Programs for the GLib library GLib is a library containing many useful C routines for things such as trees, hashes, lists, and strings. It is a useful general-purpose C library used by projects such as GTK+, GIMP, and GNOME. . This package contains command-line utilities associated with GLib, including: . * gapplication, a client for starting applications via D-Bus activation * gdbus, a tool for working with D-Bus objects and monitoring the bus * gio, a file management utility that can work with GIO virtual filesystems * gresource, which can extract resources from libraries and executables * gsettings, a tool for inspecting and editing application configuration * gio-query-modules, which updates caches used internally by GLib * glib-compile-schemas, which updates caches used internally by GLib Package: libglib2.0-data Description-md5: e30141317e2f372da30c78d06ac076ee Description-en: Common files for GLib library GLib is a library containing many useful C routines for things such as trees, hashes, lists, and strings. It is a useful general-purpose C library used by projects such as GTK+, GIMP, and GNOME. . This package is needed for the runtime libraries to display messages in languages other than English. Package: libglib2.0-dev Description-md5: 7ea731a217a4cf465ca10ffa4d3167ae Description-en: Development metapackage for the GLib family of libraries GLib is a library containing many useful C routines for things such as trees, hashes, lists, and strings. It is a useful general-purpose C library used by projects such as GTK, GIMP, and GNOME. . This package provides most of the development headers, libraries and utilities needed to compile GLib programs, and in most cases is the most appropriate package to use as a build-dependency. For lower-level packages that are involved in architecture bootstrapping, consider switching dependencies to libgio-2.0-dev. . GObject-Introspection metadata for this library is not included here, and can be found in the gir1.2-glib-2.0-dev package. Package: libglib2.0-dev-bin Description-md5: 716eb6847e618429b0a0a90ab6fd146a Description-en: Development utilities for the GLib library GLib is a library containing many useful C routines for things such as trees, hashes, lists, and strings. It is a useful general-purpose C library used by projects such as GTK+, GIMP, and GNOME. . This package is needed to compile programs against libglib2.0-0. It contains development utilities typically run during compilation and should not be installed directly. Use libglib2.0-dev instead. Package: libglib2.0-doc Description-md5: bdb9aa53f83dabd5dab7d58c0e8cd803 Description-en: Documentation files for the GLib library GLib is a library containing many useful C routines for things such as trees, hashes, lists, and strings. It is a useful general-purpose C library used by projects such as GTK+, GIMP, and GNOME. . This package contains the HTML documentation for the GLib library in /usr/share/doc/libglib2.0-doc/ . Package: libgo-14-dev Description-md5: 20a30e1e0e326264783897d4692e3ada Description-en: Runtime library for GNU Go applications (development files) This package contains the headers and static library files needed to build GNU Go applications. Package: libgo-15-dev Description-md5: 20a30e1e0e326264783897d4692e3ada Description-en: Runtime library for GNU Go applications (development files) This package contains the headers and static library files needed to build GNU Go applications. Package: libgo23 Description-md5: 9dac71a6885be90d89c8d4e0ae4b9f2c Description-en: Runtime library for GNU Go applications Library needed for GNU Go applications linked against the shared library. Package: libgo24 Description-md5: 9dac71a6885be90d89c8d4e0ae4b9f2c Description-en: Runtime library for GNU Go applications Library needed for GNU Go applications linked against the shared library. Package: libgomp1 Description-md5: 9651123458dd1bf3c162dfb6a6292ff4 Description-en: GCC OpenMP (GOMP) support library GOMP is an implementation of OpenMP for the C, C++, and Fortran compilers in the GNU Compiler Collection. Package: libgprofng0 Description-md5: f46052f9dacaacc2ef39ad7058167163 Description-en: GNU Next Generation profiler (runtime library) Gprofng is the GNU Next Generation profiler for analyzing the performance of Linux applications. Gprofng allows you to: . - Profile C / C++ / Java / Scala applications without needing to recompile - Profile multi-threaded applications - Analyze and compare multiple experiments - Use time-based sampling and / or hardware event counters . This package includes the libgprofng shared library. Package: libgprofng0-dbg Description-md5: 0d2cc31ed55dc41aac8631b189966fa8 Description-en: GNU Next Generation profiler (debug symbols) Gprofng is the GNU Next Generation profiler for analyzing the performance of Linux applications. . This package includes the debug symbols for the libgprofng shared library. Package: libgraphite2-3 Description-md5: 68d1591bf212ce8230272a42a5738b72 Description-en: Font rendering engine for Complex Scripts -- library Graphite is a system that can be used to create and use "smart fonts" capable of displaying writing systems with various complex behaviors, such as: contextual shaping, ligatures, reordering, split glyphs, bidirectionality, stacking diacritics and complex positioning. . This library was designed and developed by the NRSI (Non-Roman Script Initiative) within SIL International (www.sil.org) to act as a complement to other smart font rendering technologies with limited practical local extensibility. Its purpose is to help meet the needs of a very large number of "minority language" communities for local extensibility of complex script behaviors. . The behavior of the rendering engine for a given writing system is specified through extra tables added to a TrueType font. These tables are generated by compiling a GDL (Graphite Description Language) source file into a font using grcompiler. . This package contains the shared library. Package: libgraphite2-dev Description-md5: 7f19707ec760b78fb24460b38ecf78bd Description-en: Development files for libgraphite2 Graphite is a system that can be used to create and use "smart fonts" capable of displaying writing systems with various complex behaviors, such as: contextual shaping, ligatures, reordering, split glyphs, bidirectionality, stacking diacritics and complex positioning. . This library was designed and developed by the NRSI (Non-Roman Script Initiative) within SIL International (www.sil.org) to act as a complement to other smart font rendering technologies with limited practical local extensibility. Its purpose is to help meet the needs of a very large number of "minority language" communities for local extensibility of complex script behaviors. . The behavior of the rendering engine for a given writing system is specified through extra tables added to a TrueType font. These tables are generated by compiling a GDL (Graphite Description Language) source file into a font using grcompiler. . This package contains the development libraries for libgraphite2 Package: libgraphite2-doc Description-md5: b0b3ea4dd05ea53f9d34d1f006dde09b Description-en: Documentation for libgraphite2 Graphite is a system that can be used to create and use "smart fonts" capable of displaying writing systems with various complex behaviors, such as: contextual shaping, ligatures, reordering, split glyphs, bidirectionality, stacking diacritics and complex positioning. . This library was designed and developed by the NRSI (Non-Roman Script Initiative) within SIL International (www.sil.org) to act as a complement to other smart font rendering technologies with limited practical local extensibility. Its purpose is to help meet the needs of a very large number of "minority language" communities for local extensibility of complex script behaviors. . The behavior of the rendering engine for a given writing system is specified through extra tables added to a TrueType font. These tables are generated by compiling a GDL (Graphite Description Language) source file into a font using grcompiler. . PDF and HTML documentation for libgraphite2 Package: libhwasan0 Description-md5: 3e86044294569fc681ceeaf4424622e4 Description-en: AddressSanitizer -- a fast memory error detector AddressSanitizer (HWASan) is a fast memory error detector. It finds use-after-free and {heap,stack,global}-buffer overflow bugs in C/C++ programs. Package: libicu-dev Description-md5: 6ba8fb49531a26733d27c3f9dbfe8ad6 Description-en: Development files for International Components for Unicode ICU is a C++ and C library that provides robust and full-featured Unicode and locale support. This package contains the development files for ICU. Package: libicu76 Description-md5: ea5cc55770d8f276c67880d90115d206 Description-en: International Components for Unicode ICU is a C++ and C library that provides robust and full-featured Unicode and locale support. This package contains the runtime libraries for ICU. Package: libitm1 Description-md5: 353dc4001cbe783e9f0a27c29f5dc3b5 Description-en: GNU Transactional Memory Library GNU Transactional Memory Library (libitm) provides transaction support for accesses to the memory of a process, enabling easy-to-use synchronization of accesses to shared memory by several threads. Package: libjavascriptcoregtk-4.1-0 Description-md5: ba37ae47b0068c9a4e9c35479c706b65 Description-en: JavaScript engine library from WebKitGTK JavaScriptCore is the JavaScript engine used in WebKit. It consists of the following building blocks: lexer, parser, start-up interpreter (LLInt), baseline JIT, a low-latency optimizing JIT (DFG), and a high-throughput optimizing JIT (FTL). . This build comes from the GTK port of WebKit (API version 4.1). . This package contains the shared libraries. Package: libjavascriptcoregtk-4.1-dev Description-md5: 43ba6fffaaecf506204f5048bde381f8 Description-en: JavaScript engine library from WebKitGTK - development files JavaScriptCore is the JavaScript engine used in WebKit. It consists of the following building blocks: lexer, parser, start-up interpreter (LLInt), baseline JIT, a low-latency optimizing JIT (DFG), and a high-throughput optimizing JIT (FTL). . This build comes from the GTK port of WebKit (API version 4.1). . This package contains the development files. Package: libjavascriptcoregtk-6.0-1 Description-md5: ab8f9a4b67ac6714fcbb46da1b172212 Description-en: JavaScript engine library from WebKitGTK JavaScriptCore is the JavaScript engine used in WebKit. It consists of the following building blocks: lexer, parser, start-up interpreter (LLInt), baseline JIT, a low-latency optimizing JIT (DFG), and a high-throughput optimizing JIT (FTL). . This build comes from the GTK port of WebKit (API version 6.0). . This package contains the shared libraries. Package: libjavascriptcoregtk-6.0-dev Description-md5: 21fff7684df76d97f1f19c5619776f78 Description-en: JavaScript engine library from WebKitGTK - development files JavaScriptCore is the JavaScript engine used in WebKit. It consists of the following building blocks: lexer, parser, start-up interpreter (LLInt), baseline JIT, a low-latency optimizing JIT (DFG), and a high-throughput optimizing JIT (FTL). . This build comes from the GTK port of WebKit (API version 6.0). . This package contains the development files. Package: libjs-jquery Description-md5: c8b22b976a623a2bd39ace0d8c51066f Description-en: JavaScript library for dynamic web applications jQuery is a fast, concise, JavaScript Library that simplifies how you traverse HTML documents, handle events, perform animations, and add Ajax interactions to your web pages. jQuery is designed to change the way that you write JavaScript. Package: libjxl-dev Description-md5: b0f8476f7b2325774208e2505204f826 Description-en: JPEG XL Image Coding System - "JXL" (development files) The JPEG XL Image Coding System (ISO/IEC 18181) is a lossy and lossless image compression format. It has a rich feature set and is particularly optimized for responsive web environments, so that content renders well on a wide range of devices. Moreover, it includes several features that help transition from the legacy JPEG format. . This package installs development files. Package: libjxl-gdk-pixbuf Description-md5: 722e7530081fdffff675569ce23e4a40 Description-en: JPEG XL Plugin for gdk-pixbuf This package installs the required files for reading JPEG XL files in GTK applications. Package: libjxl0.11 Description-md5: 944b209f63240a6ed87a3f696edc166e Description-en: JPEG XL Image Coding System - "JXL" (shared libraries) The JPEG XL Image Coding System (ISO/IEC 18181) is a lossy and lossless image compression format. It has a rich feature set and is particularly optimized for responsive web environments, so that content renders well on a wide range of devices. Moreover, it includes several features that help transition from the legacy JPEG format. . This package installs shared libraries. Package: liblastlog2-2 Description-md5: eea62ff73e66a83c684042e59cac1a51 Description-en: lastlog2 database shared library Y2038 safe lastlog database implementation, library files. Package: liblastlog2-dev Description-md5: 42df80bdba2e0937a17549382e737280 Description-en: liblastlog2 development files Y2038 safe lastlog database implementation, development files. Package: liblsan0 Description-md5: fd77936d8cda7d6af8bc33d6f395c678 Description-en: LeakSanitizer -- a memory leak detector (runtime) LeakSanitizer (Lsan) is a memory leak detector which is integrated into AddressSanitizer. Package: libmagic-dev Description-md5: 93c5eb9eca91d43fe4e08b91dec0e076 Description-en: Recognize the type of data in a file using "magic" numbers - development This library can be used to classify files according to magic number tests. . This package contains the development files. Package: libmagic-mgc Description-md5: 887ab33ee2130c4cf995b3e298de4ef2 Description-en: File type determination library using "magic" numbers (compiled magic file) This package provides the compiled magic file "magic.mgc". It has been separated from libmagic1t64 in order to meet the multiarch requirements without breaking applications that expect this file at its absolute path. Package: libmagic1t64 Description-md5: 7c626dcc59dd225f2ce4a3522fed96e2 Description-en: Recognize the type of data in a file using "magic" numbers - library This library can be used to classify files according to magic number tests. It implements the core functionality of the file command. Package: libmount-dev Description-md5: 07d7a2af1f3a709af925942f04219978 Description-en: device mounting library - headers This device mounting library is used by mount and umount helpers. . This package contains the development environment for the mount library. Package: libmount1 Description-md5: 7e446c44302ff94779f1434f2e05d553 Description-en: device mounting library This device mounting library is used by mount and umount helpers. Package: libnftables-dev Description-md5: ac9e13fe39146b723a765f1a5a6e0312 Description-en: Development files for libnftables This library provides high level semantics to interact with the nftables framework by Netfilter project. . nftables replaces the old popular iptables, ip6tables, arptables and ebtables. . Netfilter software and nftables in particular are used in applications such as Internet connection sharing, firewalls, IP accounting, transparent proxying, advanced routing and traffic control. . A Linux kernel >= 3.13 is required. However, >= 4.14 is recommended. . This package provides development files and static libraries. Package: libnftables1 Description-md5: a0142ceed355e6d73013884cbcfb0491 Description-en: Netfilter nftables high level userspace API library This library provides high level semantics to interact with the nftables framework by Netfilter project. . nftables replaces the old popular iptables, ip6tables, arptables and ebtables. . Netfilter software and nftables in particular are used in applications such as Internet connection sharing, firewalls, IP accounting, transparent proxying, advanced routing and traffic control. . A Linux kernel >= 3.13 is required. However, >= 4.14 is recommended. . This package contains the libnftables library. Package: libnss-mymachines Description-md5: 588342105e1fdd6ff74c093651cb80cc Description-en: nss module to resolve hostnames for local container instances nss-mymachines is a plugin for the GNU Name Service Switch (NSS) functionality of the GNU C Library (glibc) providing hostname resolution for local containers that are registered with systemd-machined.service(8). The container names are resolved to IP addresses of the specific container, ordered by their scope. . Installing this package automatically adds mymachines to /etc/nsswitch.conf. Package: libnss-systemd Description-md5: f5bdd7572f97a2162876ec5b0a11a2ca Description-en: nss module providing dynamic user and group name resolution nss-systemd is a plug-in module for the GNU Name Service Switch (NSS) functionality of the GNU C Library (glibc), providing UNIX user and group name resolution for dynamic users and groups allocated through the DynamicUser= option in systemd unit files. See systemd.exec(5) for details on this option. . Installing this package automatically adds the module to /etc/nsswitch.conf. Package: libpam-cap Description-md5: c481c3648554442cc6a66d0b34d0d8f6 Description-en: POSIX 1003.1e capabilities (PAM module) Libcap implements the user-space interfaces to the POSIX 1003.1e capabilities available in Linux kernels. These capabilities are a partitioning of the all powerful root privilege into a set of distinct privileges. . This package contains the PAM module for enforcing capabilities on users and groups at PAM session start time. Package: libpam-doc Description-md5: 176a64d4b15e68f5628dec9ba5739e05 Description-en: Documentation of PAM Contains documentation (in HTML, ASCII, and PostScript format) for libpam, the Pluggable Authentication Modules library, a library that enables the local system administrator to choose how applications authenticate users. Package: libpam-modules Description-md5: 234b9429528430ead853cc8bbe97ffb4 Description-en: Pluggable Authentication Modules for PAM This package completes the set of modules for PAM. It includes the pam_unix.so module as well as some specialty modules. Package: libpam-modules-bin Description-md5: 25d278fc7450d5202a9a137f71302e58 Description-en: Pluggable Authentication Modules for PAM - helper binaries This package contains helper binaries used by the standard set of PAM modules in the libpam-modules package. Package: libpam-runtime Description-md5: bc15ddbf92ee7965a8588141c54bb5a1 Description-en: Runtime support for the PAM library Contains configuration files and directories required for authentication to work on Debian systems. This package is required on almost all installations. Package: libpam-systemd Description-md5: 7acf141cc9da21b0ad349b6cecc40e46 Description-en: system and service manager - PAM module This package contains the PAM module which registers user sessions in the systemd control group hierarchy for logind. . If in doubt, do install this package. . Packages that depend on logind functionality need to depend on libpam-systemd. Package: libpam0g Description-md5: af00a40029e1e1d2ad04c042c3b18095 Description-en: Pluggable Authentication Modules library Contains the shared library for Linux-PAM, a library that enables the local system administrator to choose how applications authenticate users. In other words, without rewriting or recompiling a PAM-aware application, it is possible to switch between the authentication mechanism(s) it uses. One may entirely upgrade the local authentication system without touching the applications themselves. Package: libpam0g-dev Description-md5: 61cf45bcc7cd0edb21f16d49deed0ea2 Description-en: Development files for PAM Contains C header files and development libraries for libpam, the Pluggable Authentication Modules, a library that enables the local system administrator to choose how applications authenticate users. . PAM decouples applications from the authentication mechanism, making it possible to upgrade the authentication system without recompiling or rewriting the applications. Package: libproc2-0 Description-md5: ec32c9801e27f2d28cc3c9ffc3567539 Description-en: library for accessing process information from /proc The libproc2 library is a way of accessing information out of the /proc filesystem. . This package contains the shared libraries necessary to run programs compiled with libproc2. Package: libproc2-dev Description-md5: b52a5fa6614adca942f58f5c2213c287 Description-en: library for accessing process information from /proc These are the header files for libproc2. Some packages using libproc2 to access process information from /proc need these to compile. Package: libprotobuf-dev Description-md5: 549e168dd516caf2a98fd49561c8ca60 Description-en: protocol buffers C++ library (development files) and proto files Protocol buffers are a flexible, efficient, automated mechanism for serializing structured data - similar to XML, but smaller, faster, and simpler. You define how you want your data to be structured once, then you can use special generated source code to easily write and read your structured data to and from a variety of data streams and using a variety of languages. You can even update your data structure without breaking deployed programs that are compiled against the "old" format. . Google uses Protocol Buffers for almost all of its internal RPC protocols and file formats. . This package contains the development headers and static libraries needed for writing C++ applications. Includes well known proto type files. Package: libprotobuf-lite32t64 Description-md5: bef75569f3d092ed9b714a68e215c917 Description-en: protocol buffers C++ library (lite version) Protocol buffers are a flexible, efficient, automated mechanism for serializing structured data - similar to XML, but smaller, faster, and simpler. You define how you want your data to be structured once, then you can use special generated source code to easily write and read your structured data to and from a variety of data streams and using a variety of languages. You can even update your data structure without breaking deployed programs that are compiled against the "old" format. . Google uses Protocol Buffers for almost all of its internal RPC protocols and file formats. . This package contains the runtime library needed for C++ applications whose message definitions have the "lite runtime" optimization setting. Package: libprotobuf32t64 Description-md5: c69f5af146ab9bc64e44b912e5af457e Description-en: protocol buffers C++ library Protocol buffers are a flexible, efficient, automated mechanism for serializing structured data - similar to XML, but smaller, faster, and simpler. You define how you want your data to be structured once, then you can use special generated source code to easily write and read your structured data to and from a variety of data streams and using a variety of languages. You can even update your data structure without breaking deployed programs that are compiled against the "old" format. . Google uses Protocol Buffers for almost all of its internal RPC protocols and file formats. . This package contains the runtime library needed for C++ applications. Package: libprotoc-dev Description-md5: 441ff9619f6d64f58de3a01f647b0edb Description-en: protocol buffers compiler library (development files) Protocol buffers are a flexible, efficient, automated mechanism for serializing structured data - similar to XML, but smaller, faster, and simpler. You define how you want your data to be structured once, then you can use special generated source code to easily write and read your structured data to and from a variety of data streams and using a variety of languages. You can even update your data structure without breaking deployed programs that are compiled against the "old" format. . Google uses Protocol Buffers for almost all of its internal RPC protocols and file formats. . This package contains the development headers and static library needed for writing protobuf compilers. Package: libprotoc32t64 Description-md5: c53c70dca7ff74e285f88be70de72a0f Description-en: protocol buffers compiler library Protocol buffers are a flexible, efficient, automated mechanism for serializing structured data - similar to XML, but smaller, faster, and simpler. You define how you want your data to be structured once, then you can use special generated source code to easily write and read your structured data to and from a variety of data streams and using a variety of languages. You can even update your data structure without breaking deployed programs that are compiled against the "old" format. . Google uses Protocol Buffers for almost all of its internal RPC protocols and file formats. . This package contains the runtime library needed for the protocol buffer compiler. Package: libquadmath0 Description-md5: fb375c278b15a5774cef34cf9570ecc9 Description-en: GCC Quad-Precision Math Library A library, which provides quad-precision mathematical functions on targets supporting the __float128 datatype. The library is used to provide on such targets the REAL(16) type in the GNU Fortran compiler. Package: libselinux1 Description-md5: 90f6e1cb06c527bc3fc11ec6f969c59c Description-en: SELinux runtime shared libraries This package provides the shared libraries for Security-enhanced Linux that provides interfaces (e.g. library functions for the SELinux kernel APIs like getcon(), other support functions like getseuserbyname()) to SELinux-aware applications. Security-enhanced Linux is a patch of the Linux kernel and a number of utilities with enhanced security functionality designed to add mandatory access controls to Linux. The Security-enhanced Linux kernel contains new architectural components originally developed to improve the security of the Flask operating system. These architectural components provide general support for the enforcement of many kinds of mandatory access control policies, including those based on the concepts of Type Enforcement, Role-based Access Control, and Multi-level Security. . libselinux1 provides an API for SELinux applications to get and set process and file security contexts and to obtain security policy decisions. Required for any applications that use the SELinux API. libselinux may use the shared libsepol to manipulate the binary policy if necessary (e.g. to downgrade the policy format to an older version supported by the kernel) when loading policy. Package: libselinux1-dev Description-md5: ca6eeba78d95ecb95827216f2b16ab42 Description-en: SELinux development headers This package provides the static libraries and header files needed for developing SELinux applications. Security-enhanced Linux is a patch of the Linux kernel and a number of utilities with enhanced security functionality designed to add mandatory access controls to Linux. The Security-enhanced Linux kernel contains new architectural components originally developed to improve the security of the Flask operating system. These architectural components provide general support for the enforcement of many kinds of mandatory access control policies, including those based on the concepts of Type Enforcement, Role-based Access Control, and Multi-level Security. Package: libsframe-dev Description-md5: 47f3562091188aa0f476c28a648e3922 Description-en: Library to handle the SFrame format (development files) SFrame stands for Simple Frame format. SFrame format keeps track of the minimal necessary information needed for generating stack traces. . This package includes the libsframe header files and static library. Package: libsframe2 Description-md5: f1d30eda4ea5698212dcbe88096d5ce1 Description-en: Library to handle the SFrame format (runtime library) SFrame stands for Simple Frame format. SFrame format keeps track of the minimal necessary information needed for generating stack traces. . This package includes the libsframe shared library. Package: libsframe2-dbg Description-md5: 34f0572cb0763bbd4dcaf952559f8c27 Description-en: Library to handle the SFrame format (debug symbols) SFrame stands for Simple Frame format. SFrame format keeps track of the minimal necessary information needed for generating stack traces. . This package includes the debug symbols for the libsframe shared library. Package: libsigc++-2.0-0v5 Description-md5: 0f629177a6b7e6200b446de8a0a45992 Description-en: type-safe Signal Framework for C++ - runtime This library implements a full callback system for use in widget libraries, abstract interfaces, and general programming. It provides the ability to connect an abstract callback to a class method, function, or function object, and contains adaptor classes for the connection of dissimilar callbacks. . These are the runtime files for libsigc++, needed only if you wish to run software which depends on it. Package: libsigc++-2.0-dev Description-md5: 2fc5e630cb35c41ccaccff38822cd939 Description-en: type-safe Signal Framework for C++ - development files This library implements a full callback system for use in widget libraries, abstract interfaces, and general programming. It provides the ability to connect an abstract callback to a class method, function, or function object, and contains adaptor classes for the connection of dissimilar callbacks. . These are the development files for libsigc++, needed only if you wish to write software which uses it. Package: libsigc++-2.0-doc Description-md5: 66182e93dcf0771a483485fd7d8542bc Description-en: type-safe Signal Framework for C++ - reference documentation This library implements a full callback system for use in widget libraries, abstract interfaces, and general programming. It provides the ability to connect an abstract callback to a class method, function, or function object, and contains adaptor classes for the connection of dissimilar callbacks. . This package contains the reference documentation for libsigc++, needed only if you wish to write software which uses it. Package: libsmartcols-dev Description-md5: a7578b54dbfd56c566b744ccaecec7c9 Description-en: smart column output alignment library - headers This smart column output alignment library is used by fdisk utilities. . This package contains the development environment for the mount library. Package: libsmartcols1 Description-md5: d5382f0223188fc45ed69f879488c198 Description-en: smart column output alignment library This smart column output alignment library is used by fdisk utilities. Package: libsndfile1 Description-md5: 67b723b50c9aa944fba48e79d51e9d5c Description-en: Library for reading/writing audio files libsndfile is a library of C routines for reading and writing files containing sampled audio data. . Various versions of WAV (integer, floating point, GSM, and compressed formats); Microsoft PCM, A-law and u-law formats; AIFF, AIFC and RIFX; various AU/SND formats (Sun/NeXT, Dec AU, G721 and G723 ADPCM); RAW header-less PCM files; Amiga IFF/8SVX/16SV PCM files; Ensoniq PARIS (.PAF); Apple's Core Audio Format (CAF) and others. Package: libsndfile1-dev Description-md5: 7ff7eba6e64514219e2a1e52dcdffde5 Description-en: Development files for libsndfile; a library for reading/writing audio files libsndfile is a library of C routines for reading and writing files containing sampled audio data. . This is the development version of libsndfile. You will need this only if you intend to compile programs that use this library. Package: libssl-dev Description-md5: 27044468897c45b271f879c7c6e135fe Description-en: Secure Sockets Layer toolkit - development files This package is part of the OpenSSL project's implementation of the SSL and TLS cryptographic protocols for secure communication over the Internet. . It contains development libraries, header files, and manpages for libssl and libcrypto. Package: libssl-doc Description-md5: 863c8f0d45ab34415ebc295c04753c98 Description-en: Secure Sockets Layer toolkit - development documentation This package is part of the OpenSSL project's implementation of the SSL and TLS cryptographic protocols for secure communication over the Internet. . It contains manpages and demo files for libssl and libcrypto. Package: libssl3t64 Description-md5: 88547c6206c7fbc4fcc7d09ce100d210 Description-en: Secure Sockets Layer toolkit - shared libraries This package is part of the OpenSSL project's implementation of the SSL and TLS cryptographic protocols for secure communication over the Internet. . It provides the libssl and libcrypto shared libraries. Package: libstdc++-14-dev Description-md5: a197f2aec835e5fc6f8f76039d8a7c4e Description-en: GNU Standard C++ Library v3 (development files) This package contains the headers and static library files necessary for building C++ programs which use libstdc++. . libstdc++-v3 is a complete rewrite from the previous libstdc++-v2, which was included up to g++-2.95. The first version of libstdc++-v3 appeared in g++-3.0. Package: libstdc++-14-doc Description-md5: 1a4b88b8d9f96dfb2ac2be1049b4db01 Description-en: GNU Standard C++ Library v3 (documentation files) This package contains documentation files for the GNU stdc++ library. . One set is the distribution documentation, the other set is the source documentation including a namespace list, class hierarchy, alphabetical list, compound list, file list, namespace members, compound members and file members. Package: libstdc++-14-pic Description-md5: 1b398e74a3b20401a8669d8c6472c7cc Description-en: GNU Standard C++ Library v3 (shared library subset kit) This is used to develop subsets of the libstdc++ shared libraries for use on custom installation floppies and in embedded systems. . Unless you are making one of those, you will not need this package. Package: libstdc++-15-dev Description-md5: a197f2aec835e5fc6f8f76039d8a7c4e Description-en: GNU Standard C++ Library v3 (development files) This package contains the headers and static library files necessary for building C++ programs which use libstdc++. . libstdc++-v3 is a complete rewrite from the previous libstdc++-v2, which was included up to g++-2.95. The first version of libstdc++-v3 appeared in g++-3.0. Package: libstdc++-15-doc Description-md5: 1a4b88b8d9f96dfb2ac2be1049b4db01 Description-en: GNU Standard C++ Library v3 (documentation files) This package contains documentation files for the GNU stdc++ library. . One set is the distribution documentation, the other set is the source documentation including a namespace list, class hierarchy, alphabetical list, compound list, file list, namespace members, compound members and file members. Package: libstdc++6 Description-md5: 724ab84919e0e220afb960e36463914d Description-en: GNU Standard C++ Library v3 This package contains an additional runtime library for C++ programs built with the GNU compiler. . libstdc++-v3 is a complete rewrite from the previous libstdc++-v2, which was included up to g++-2.95. The first version of libstdc++-v3 appeared in g++-3.0. Package: libsystemd-dev Description-md5: b7a2ec6dc94dcd8833e0cab01ff4a2c0 Description-en: systemd utility library - development files This library provides APIs to interface with various system components such as the system journal, the system service manager, D-Bus and more. . This package contains the files needed for developing applications that use libsystemd. Package: libsystemd-shared Description-md5: 96ee33bdb47b225b7cbe0eccdc682e81 Description-en: systemd shared private library This internal shared library provides common code used by various systemd components. It is supposed to decrease memory and disk footprint. The shared library is not meant for public use and is not API or ABI stable. Package: libsystemd0 Description-md5: 9afc42993cf4bce87281097b6b9586c9 Description-en: systemd utility library This library provides APIs to interface with various system components such as the system journal, the system service manager, D-Bus and more. Package: libtsan2 Description-md5: 750c144e4cc79bcf76c58f43c882ff70 Description-en: ThreadSanitizer -- a Valgrind-based detector of data races (runtime) ThreadSanitizer (Tsan) is a data race detector for C/C++ programs. The Linux and Mac versions are based on Valgrind. Package: libubsan1 Description-md5: 0d50b6d1808d18442db720f04627b846 Description-en: UBSan -- undefined behaviour sanitizer (runtime) UndefinedBehaviorSanitizer can be enabled via -fsanitize=undefined. Various computations will be instrumented to detect undefined behavior at runtime. Available for C and C++. Package: libudev-dev Description-md5: 3a6ff6d519afbe7874e323cf64c41387 Description-en: libudev development files This library provides APIs to introspect and enumerate devices on the local system. . This package contains the files needed for developing applications that use libudev. Package: libudev1 Description-md5: ee41de00cbb160aaa4ae2b193df34f91 Description-en: libudev shared library This library provides APIs to introspect and enumerate devices on the local system. Package: libuuid1 Description-md5: f31dd3d34d42a99fedd60c9fb7d79469 Description-en: Universally Unique ID library The libuuid library generates and parses 128-bit Universally Unique IDs (UUIDs). A UUID is an identifier that is unique within the space of all such identifiers across both space and time. It can be used for multiple purposes, from tagging objects with an extremely short lifetime to reliably identifying very persistent objects across a network. . See RFC 4122 for more information. Package: libwebkit2gtk-4.0-doc Description-md5: 920352aab8ba41dddb2fbd0066b144fc Description-en: WebKitGTK documentation (transitional dummy package) This is a transitional dummy package, it can be safely removed. Package: libwebkit2gtk-4.1-0 Description-md5: 646e3a0937b0325036cf716dec657c04 Description-en: Web content engine library for GTK WebKit is a web content engine, derived from KHTML and KJS from KDE, and used primarily in Apple's Safari browser. It is made to be embedded in other applications, such as mail readers, or web browsers. . It is able to display content such as HTML, SVG, XML, and others. It also supports DOM, XMLHttpRequest, XSLT, CSS, JavaScript/ECMAScript and more. . WebKitGTK is a WebKit port designed to be used in GTK applications. This build provides version 4.1 of the API and uses libsoup v3 for the networking stack and the GTK 3 widget toolkit. . This package contains the shared libraries. Package: libwebkit2gtk-4.1-dev Description-md5: 6f7ca6c0925469585667e0c1b28a2099 Description-en: Web content engine library for GTK - development files WebKit is a web content engine, derived from KHTML and KJS from KDE, and used primarily in Apple's Safari browser. It is made to be embedded in other applications, such as mail readers, or web browsers. . It is able to display content such as HTML, SVG, XML, and others. It also supports DOM, XMLHttpRequest, XSLT, CSS, JavaScript/ECMAScript and more. . WebKitGTK is a WebKit port designed to be used in GTK applications. This build provides version 4.1 of the API and uses libsoup v3 for the networking stack and the GTK 3 widget toolkit. . This package contains the development files. Package: libwebkitgtk-6.0-4 Description-md5: 66a23a3e72019d693d95fb2ac548376a Description-en: Web content engine library for GTK WebKit is a web content engine, derived from KHTML and KJS from KDE, and used primarily in Apple's Safari browser. It is made to be embedded in other applications, such as mail readers, or web browsers. . It is able to display content such as HTML, SVG, XML, and others. It also supports DOM, XMLHttpRequest, XSLT, CSS, JavaScript/ECMAScript and more. . WebKitGTK is a WebKit port designed to be used in GTK applications. This build provides version 6.0 of the API and uses libsoup v3 for the networking stack and the GTK 4 widget toolkit. . This package contains the shared libraries. Package: libwebkitgtk-6.0-dev Description-md5: 18007af192c3d327e12b221008c58783 Description-en: Web content engine library for GTK - development files WebKit is a web content engine, derived from KHTML and KJS from KDE, and used primarily in Apple's Safari browser. It is made to be embedded in other applications, such as mail readers, or web browsers. . It is able to display content such as HTML, SVG, XML, and others. It also supports DOM, XMLHttpRequest, XSLT, CSS, JavaScript/ECMAScript and more. . WebKitGTK is a WebKit port designed to be used in GTK applications. This build provides version 6.0 of the API and uses libsoup v3 for the networking stack and the GTK 4 widget toolkit. . This package contains the development files. Package: libwebkitgtk-doc Description-md5: 158f0bd54e6de44154becdd557cfcdd0 Description-en: Web content engine library for GTK - documentation WebKit is a web content engine, derived from KHTML and KJS from KDE, and used primarily in Apple's Safari browser. It is made to be embedded in other applications, such as mail readers, or web browsers. . It is able to display content such as HTML, SVG, XML, and others. It also supports DOM, XMLHttpRequest, XSLT, CSS, JavaScript/ECMAScript and more. . WebKitGTK is a WebKit port designed to be used in GTK applications. . This package contains the documentation. Package: libx32asan8 Description-md5: 51a639c3760e456ac48834fb47045c42 Description-en: AddressSanitizer -- a fast memory error detector (x32) AddressSanitizer (ASan) is a fast memory error detector. It finds use-after-free and {heap,stack,global}-buffer overflow bugs in C/C++ programs. Package: libx32atomic1 Description-md5: 17429d2d39217f0a95507decf171c10f Description-en: support library providing __atomic built-in functions (x32) library providing __atomic built-in functions. When an atomic call cannot be turned into lock-free instructions, GCC will make calls into this library. Package: libx32gcc-14-dev Description-md5: df49fd36cacd441ececa361c98eaaa4a Description-en: GCC support library (x32 development files) This package contains the headers and static library files necessary for building C programs which use libgcc, libgomp, libquadmath, libssp or libitm. Package: libx32gcc-15-dev Description-md5: df49fd36cacd441ececa361c98eaaa4a Description-en: GCC support library (x32 development files) This package contains the headers and static library files necessary for building C programs which use libgcc, libgomp, libquadmath, libssp or libitm. Package: libx32gcc-s1 Description-md5: 23c4abc6ef9d972b6f047316897bf30d Description-en: GCC support library (x32) Shared version of the support library, a library of internal subroutines that GCC uses to overcome shortcomings of particular machines, or special needs for some languages. Package: libx32gfortran-15-dev Description-md5: aae616b6d05c4081844ad0d321e187db Description-en: Runtime library for GNU Fortran applications (x32 development files) This package contains the headers and static library files needed to build GNU Fortran applications. Package: libx32gfortran5 Description-md5: 3c011e928f9c344ce5ade56af0ec77b2 Description-en: Runtime library for GNU Fortran applications (x32) Library needed for GNU Fortran applications linked against the shared library. Package: libx32go-14-dev Description-md5: e36fc6f7d9da2b503ade97820475f44a Description-en: Runtime library for GNU Go applications (x32 development files) This package contains the headers and static library files needed to build GNU Go applications. Package: libx32go-15-dev Description-md5: e36fc6f7d9da2b503ade97820475f44a Description-en: Runtime library for GNU Go applications (x32 development files) This package contains the headers and static library files needed to build GNU Go applications. Package: libx32go23 Description-md5: 274d67a4807b2168ae6370f3e1f6a565 Description-en: Runtime library for GNU Go applications (x32) Library needed for GNU Go applications linked against the shared library. Package: libx32go24 Description-md5: 274d67a4807b2168ae6370f3e1f6a565 Description-en: Runtime library for GNU Go applications (x32) Library needed for GNU Go applications linked against the shared library. Package: libx32gomp1 Description-md5: 1388436f97e9425feb598766343a05b7 Description-en: GCC OpenMP (GOMP) support library (x32) GOMP is an implementation of OpenMP for the C, C++, and Fortran compilers in the GNU Compiler Collection. Package: libx32itm1 Description-md5: 60c3549c857ee22163b3a82b265880de Description-en: GNU Transactional Memory Library (x32) This manual documents the usage and internals of libitm. It provides transaction support for accesses to the memory of a process, enabling easy-to-use synchronization of accesses to shared memory by several threads. Package: libx32quadmath0 Description-md5: 514c6a5cffd4febce8121f2d08419504 Description-en: GCC Quad-Precision Math Library (x32) A library, which provides quad-precision mathematical functions on targets supporting the __float128 datatype. The library is used to provide on such targets the REAL(16) type in the GNU Fortran compiler. Package: libx32stdc++-15-dev Description-md5: a197f2aec835e5fc6f8f76039d8a7c4e Description-en: GNU Standard C++ Library v3 (development files) This package contains the headers and static library files necessary for building C++ programs which use libstdc++. . libstdc++-v3 is a complete rewrite from the previous libstdc++-v2, which was included up to g++-2.95. The first version of libstdc++-v3 appeared in g++-3.0. Package: libx32stdc++6 Description-md5: f336833aedca4cda1d9923ce79172164 Description-en: GNU Standard C++ Library v3 (x32) This package contains an additional runtime library for C++ programs built with the GNU compiler. . libstdc++-v3 is a complete rewrite from the previous libstdc++-v2, which was included up to g++-2.95. The first version of libstdc++-v3 appeared in g++-3.0. Package: libx32ubsan1 Description-md5: 1e3c22c974d49dfa0d90d25dc725cf74 Description-en: UBSan -- undefined behaviour sanitizer (x32) UndefinedBehaviorSanitizer can be enabled via -fsanitize=undefined. Various computations will be instrumented to detect undefined behavior at runtime. Available for C and C++. Package: libx32z1 Description-md5: 43b890ebbaaf716c8be463b3eb420ee1 Description-en: compression library - x32 runtime zlib is a library implementing the deflate compression method found in gzip and PKZIP. This package includes a n32 version of the shared library. Package: libx32z1-dev Description-md5: a88726fdc371e9f5fb20927655d9765a Description-en: compression library - x32 - DO NOT USE EXCEPT FOR PACKAGING zlib is a library implementing the deflate compression method found in gzip and PKZIP. This package includes the development support files for building n32 applications. . This package should ONLY be used for building packages, users who do not need to build packages should use multiarch to install the relevant runtime. Package: libzstd-dev Description-md5: 2a488d6e9949d76acce6c556e765f713 Description-en: fast lossless compression algorithm -- development files Zstd, short for Zstandard, is a fast lossless compression algorithm, targeting real-time compression scenarios at zlib-level compression ratio. . This package contains the headers and static library. Package: libzstd1 Description-md5: 5529781042229a3d4fc1e69daa94d736 Description-en: fast lossless compression algorithm Zstd, short for Zstandard, is a fast lossless compression algorithm, targeting real-time compression scenarios at zlib-level compression ratio. . This package contains the shared library. Package: linux-base Description-md5: 441643227abc8006d7ae05aa2312ff51 Description-en: Linux image base package This package contains files and support scripts for all Linux images. Package: linux-base-sgx Description-md5: aa4d06104fb4532f5a75e88b8a4292e4 Description-en: Linux image base package for DCAP SGX This package contains files and support scripts for all Linux images with DCAP SGX drivers. Package: linux-firmware Description-md5: 7a047bff9e44dce458a300976c12f9da Description-en: Firmware for Linux kernel drivers This package provides firmware used by Linux kernel drivers. Package: linux-sysctl-defaults Description-md5: 5f0a2375f7b57f55127f0859d20e4c34 Description-en: default sysctl configuration for Linux This package contains a sysctl configuration file setting some sensible defaults for Linux. Package: locales Description-md5: 68ccf846a4935e541c4a717fc0a1f3e3 Description-en: GNU C Library: National Language (locale) data [support] Machine-readable data files, shared objects and programs used by the C library for localization (l10n) and internationalization (i18n) support. . This package contains tools to generate locale definitions from source files (included in this package). It allows you to customize which definitions actually get generated. This is a space-saver over how this package used to be, with all locales generated by default. This created a package that unpacked to an excess of 30 megs. Package: login Description-md5: 5df4e54496497c63114f4af2c9648682 Description-en: system login tools This package provides support for console-based logins and for changing effective user or group IDs, including: * login, the program that invokes a user shell on a virtual terminal, * nologin, a dummy shell for disabled user accounts, * newgrp, a program to change the effective group IDs. Package: mount Description-md5: 90e187380786a435bb9c85b37afa2c5f Description-en: tools for mounting and manipulating filesystems This package provides the mount(8), umount(8), swapon(8), swapoff(8), and losetup(8) commands. Package: nftables Description-md5: 24bc0867cd246ced705663120fd62b92 Description-en: Program to control packet filtering rules by Netfilter project This software provides an in-kernel packet classification framework that is based on a network-specific Virtual Machine (VM) and the nft userspace command line tool. The nftables framework reuses the existing Netfilter subsystems such as the existing hook infrastructure, the connection tracking system, NAT, userspace queueing and logging subsystem. . nftables replaces the old popular iptables, ip6tables, arptables and ebtables. . Netfilter software and nftables in particular are used in applications such as Internet connection sharing, firewalls, IP accounting, transparent proxying, advanced routing and traffic control. . A Linux kernel >= 3.13 is required. However, >= 4.14 is recommended. Package: openssl Description-md5: 9b6de2bb6e1d9016aeb0f00bcf6617bd Description-en: Secure Sockets Layer toolkit - cryptographic utility This package is part of the OpenSSL project's implementation of the SSL and TLS cryptographic protocols for secure communication over the Internet. . It contains the general-purpose command line binary /usr/bin/openssl, useful for cryptographic operations such as: * creating RSA, DH, and DSA key parameters; * creating X.509 certificates, CSRs, and CRLs; * calculating message digests; * encrypting and decrypting with ciphers; * testing SSL/TLS clients and servers; * handling S/MIME signed or encrypted mail. Package: openssl-provider-legacy Description-md5: 6ae6f8ddd6448e07b5d86dc9b813dddd Description-en: Secure Sockets Layer toolkit - cryptographic utility This package is part of the OpenSSL project's implementation of the SSL and TLS cryptographic protocols for secure communication over the Internet. . This package contains the legacy provider. The OpenSSL legacy provider supplies OpenSSL implementations of algorithms that have been deemed legacy. Such algorithms have commonly fallen out of use, have been deemed insecure by the cryptography community, or something similar. For details see OSSL_PROVIDER-legacy man page. Package: openstack-dashboard Description-md5: a54f5b92f84ab1d5b6c3fa553f99ef77 Description-en: Django web interface for OpenStack The OpenStack Dashboard is a reference implementation of a Django site that uses the Django-Nova project to provide web based interactions with the OpenStack Nova cloud controller. Package: openstack-dashboard-common Description-md5: 1b68105103a266973cb0e91a7529a793 Description-en: Django web interface for OpenStack - common files The OpenStack Dashboard is a reference implementation of a Django site that uses the Django-Nova project to provide web based interactions with the OpenStack Nova cloud controller. . This package provides common files. Package: procps Description-md5: 943f3288c1aaa379fca73a3ff1a35278 Description-en: /proc file system utilities This package provides command line and full screen utilities for browsing procfs, a "pseudo" file system dynamically generated by the kernel to provide information about the status of entries in its process table (such as whether the process is running, stopped, or a "zombie"). . It contains free, kill, pkill, pgrep, pmap, ps, pwdx, skill, slabtop, snice, sysctl, tload, top, uptime, vmstat, w, and watch. Package: ptyxis Description-md5: 6af4ae1742a4b147238a4115a085548d Description-en: Modern terminal emulator for GNOME Ptyxis is a terminal for GNOME with first-class support for containers. This app provides significantly more preferences than gnome-console while arranging them in a simpler layout than gnome-terminal. Ptyxis is also crafted to be both fast and efficient. Package: python-django-doc Description-md5: 257e8ca2132ad054b44d0dd521e727f5 Description-en: High-level Python web development framework (documentation) Django is a high-level web application framework that loosely follows the model-view-controller design pattern. . Python's equivalent to Ruby on Rails, Django lets you build complex data-driven websites quickly and easily - Django focuses on automating as much as possible and adhering to the "Don't Repeat Yourself" (DRY) principle. . Django additionally emphasizes reusability and "pluggability" of components; many generic third-party "applications" are available to enhance projects or to simply to reduce development time even further. . This package contains the HTML documentation and example projects. Package: python3-django Description-md5: efe2f6ec2ae89851c710c280956fa785 Description-en: High-level Python web development framework Django is a high-level web application framework that loosely follows the model-view-controller design pattern. . Python's equivalent to Ruby on Rails, Django lets you build complex data-driven websites quickly and easily - Django focuses on automating as much as possible and adhering to the "Don't Repeat Yourself" (DRY) principle. . Django additionally emphasizes reusability and "pluggability" of components; many generic third-party "applications" are available to enhance projects or to simply to reduce development time even further. . Notable features include: * An object-relational mapper (ORM) * Automatic admin interface * Elegant URL dispatcher * Form serialization and validation system * Templating system * Lightweight, standalone web server for development and testing * Internationalization support * Testing framework and client Package: python3-django-horizon Description-md5: a44d020aa6903cc59b58bdbc9eb3d400 Description-en: Django module providing web based interaction with OpenStack (Python 3) The Django-Nova project is a Django module that is used to provide web based interactions with the OpenStack Nova cloud controller. . This package provides the Python 3 module. Package: python3-django-openstack-auth Description-md5: 24e7591fda8be85ab0eaf73129aaf2d7 Description-en: Django authentication backend for Openstack - Python 3 Django authentication backend for use with the OpenStack Keystone Identity backend. This Python module is used by Horizon (the Openstack Dashport web GUI) to auth against Keystone. . This package provides the Python 3 module. Package: qemu-system-data Description-md5: c61105eaa5edddd1459bc7ebfd8348d6 Description-en: QEMU full system emulation (data files) This package provides architecture-neutral data files (such as keyboard definitions, icons) for system-mode QEMU emulation (qemu-system-*) packages. Package: rfkill Description-md5: 17939c81bd8d1bc5321ecc9fb8e5f507 Description-en: tool for enabling and disabling wireless devices rfkill is a simple tool for accessing the Linux rfkill device interface, which is used to enable and disable wireless networking devices, typically WLAN, Bluetooth and mobile broadband. Package: systemd Description-md5: 2728f00e9cb47f195aa39097a3afbc42 Description-en: system and service manager systemd is a system and service manager for Linux. It provides aggressive parallelization capabilities, uses socket and D-Bus activation for starting services, offers on-demand starting of daemons, keeps track of processes using Linux control groups, maintains mount and automount points and implements an elaborate transactional dependency-based service control logic. . Installing the systemd package will not switch your init system unless you boot with init=/lib/systemd/systemd or install systemd-sysv in addition. Package: systemd-container Description-md5: 06057fffc2ba14e4be80360a092a18b4 Description-en: systemd container/nspawn tools This package provides systemd's tools for nspawn and container/VM management: * systemd-nspawn * systemd-machined and machinectl * systemd-importd * systemd-portabled and portablectl Package: systemd-cryptsetup Description-md5: e998662f4ed5c59ecb7053ea5d8389a9 Description-en: Provides cryptsetup, integritysetup and veritysetup utilities Utilities and units that integrated cryptsetup/integritysetup/veritysetup support in systemd. Package: systemd-dev Description-md5: eb131ce1d6cce8efc52306fe1345c633 Description-en: systemd development files This package contains the systemd and udev pkg-config files. Note that these are different from the libsystemd's and libudev's pkg-config files, which can still be found in the respective dev packages, but instead provide data such as the installation directories for units, and more. Package: systemd-oomd Description-md5: 2250389a2113f869d77c032878886a16 Description-en: userspace out-of-memory (OOM) killer systemd-oomd is a system service that uses cgroups-v2 and pressure stall information (PSI) to monitor and take action on processes before an OOM occurs in kernel space. Package: systemd-resolved Description-md5: 846dc3eb3129c6a17b29965b209c161e Description-en: systemd DNS resolver This package provides systemd's DNS resolver and the command line tool to manage it. . Installing this package automatically overwrites /etc/resolv.conf and switches it to be managed by systemd-resolved. Package: systemd-sysv Description-md5: d704d23b3cdeb076982e788442f6eee1 Description-en: system and service manager - SysV compatibility symlinks This package provides manual pages and compatibility symlinks needed for systemd to replace sysvinit. . Installing systemd-sysv will overwrite /sbin/init with a symlink to systemd. Package: systemd-timesyncd Description-md5: cc67d85c248836d96a6310e58a659de0 Description-en: minimalistic service to synchronize local time with NTP servers The package contains the systemd-timesyncd system service that may be used to synchronize the local system clock with a remote Network Time Protocol server. Package: udev Description-md5: e875ddb09f46f1f7672af537f0c875ca Description-en: /dev/ and hotplug management daemon udev is a daemon which dynamically creates and removes device nodes from /dev/, handles hotplug events and loads drivers at boot time. Package: util-linux Description-md5: 33d0291a69ffd307cfba295915df602a Description-en: miscellaneous system utilities This package contains a number of important utilities, most of which are oriented towards maintenance of your system. Some of the more important utilities included in this package allow you to view kernel messages, create new filesystems, view block device information, interface with real time clock, etc. Package: util-linux-locales Description-md5: 82531200c8b3929a95bc0ef54cf0d268 Description-en: locales files for util-linux This package contains the internationalization files for the util-linux package. . They are needed when you want the programs in util-linux to print their messages in other languages than English, or read manual pages in another language than English. Package: uuid-dev Description-md5: daeeb422c8be25af61a5fe52deff08a8 Description-en: Universally Unique ID library - headers and static libraries The libuuid library generates and parses 128-bit Universally Unique IDs (UUIDs). See RFC 4122 for more information. . This package contains the development environment for the uuid library. Package: uuid-runtime Description-md5: c848721d4a6e6dbc698c36d06bf45ef9 Description-en: runtime components for the Universally Unique ID library The libuuid library generates and parses 128-bit Universally Unique IDs (UUIDs). A UUID is an identifier that is unique within the space of all such identifiers across both space and time. It can be used for multiple purposes, from tagging objects with an extremely short lifetime to reliably identifying very persistent objects across a network. . See RFC 4122 for more information. . This package contains the uuidgen program and the uuidd daemon. . The uuidd daemon is used to generate UUIDs, especially time-based UUIDs, in a secure and guaranteed-unique fashion, even in the face of large numbers of threads trying to grab UUIDs running on different CPUs. It is used by libuuid as well as the uuidgen program. Package: zlib1g Description-md5: 567f396aeeb2b2b63295099aed237057 Description-en: compression library - runtime zlib is a library implementing the deflate compression method found in gzip and PKZIP. This package includes the shared library. Package: zlib1g-dev Description-md5: d7f4e8a626131fc83c643c5d59096290 Description-en: compression library - development zlib is a library implementing the deflate compression method found in gzip and PKZIP. This package includes the development support files. Package: zstd Description-md5: d2e4d40bb07cc70b5a32d3b4a9b5f53d Description-en: fast lossless compression algorithm -- CLI tool Zstd, short for Zstandard, is a fast lossless compression algorithm, targeting real-time compression scenarios at zlib-level compression ratio. . This package contains the CLI program implementing zstd. Package: cpp-15-aarch64-linux-gnu Description-md5: 60cdf4bb445be15901cb015feeb990b7 Description-en: GNU C preprocessor for aarch64-linux-gnu A macro processor that is used automatically by the GNU C compiler to transform programs before actual compilation. . This package has been separated from gcc for the benefit of those who require the preprocessor configured for aarch64-linux-gnu architecture but not the compiler. Package: g++-15-aarch64-linux-gnu Description-md5: b996f012975000f1ea76fd985d3446d1 Description-en: GNU C++ compiler for aarch64-linux-gnu architecture This is the GNU C++ compiler, a fairly portable optimizing compiler for C++. . This package contains C++ cross-compiler for aarch64-linux-gnu architecture. Package: gcc-15-aarch64-linux-gnu Description-md5: a174b3cd9d1ab0fcdf59f034f24cdb2b Description-en: GNU C compiler for the aarch64-linux-gnu architecture This is the GNU C compiler for the aarch64-linux-gnu architecture, a fairly portable optimizing compiler for C. Package: gfortran-15-aarch64-linux-gnu Description-md5: c9a58ab7359394ce988886339852089d Description-en: GNU Fortran compiler for the aarch64-linux-gnu architecture This is the GNU Fortran compiler for the aarch64-linux-gnu architecture, which compiles Fortran on platforms supported by the gcc compiler. It uses the gcc backend to generate optimized code. Package: girepository-tools Description-md5: 4bf029f1086b3f3032b36fe7d4d63373 Description-en: Tools for working with GObject-Introspection repositories GLib is a library containing many useful C routines for things such as trees, hashes, lists, and strings. It is a useful general-purpose C library used by projects such as GTK, GIMP, and GNOME. . This package contains developer-oriented command-line tools for working with GObject-Introspection typelibs and GIR XML, which are used to provide language bindings and documentation for GLib-based libraries: . * aarch64-linux-gnu-gi-compile-repository * aarch64-linux-gnu-gi-decompile-typelib * aarch64-linux-gnu-gi-inspect-typelib . When used via this package, these tools must be invoked with their host-architecture-specific names. . For command-line compatibility with non-Debian-based GLib packaging, the libglib2.0-dev package also provides versions of these tools for the system's primary architecture, named without the architecture prefix. Package: hwe-lenovo-x13s-meta Description-md5: 01348924b7e6f25294db4c695d28cd21 Description-en: Meta package for Ubuntu on Lenovo X13s arm64 laptops This package contains some default settings and dependencies that are specific to Ubuntu running on Lenovo X13s arm64 laptops. Package: hwe-qcom-x1e-meta Description-md5: aedfad86b6d1725f42ab93238f667960 Description-en: Meta package for Ubuntu on Qualcomm X Elite based arm64 laptops This package contains some default settings and dependencies that are specific to Ubuntu running on Qualcomm X Elite arm64 laptops. Package: inetutils-telnet Description-md5: de2a7d2137605fd09358cbc6744a484d Description-en: telnet client The telnet command is used for interactive communication with another host using the TELNET protocol. . This implementation supports Kerberos, for authentication and encryption. Package: ubuntu-x13s-settings Description-md5: 4c95614cab3b4fb70362718d5704844b Description-en: Default settings for Ubuntu on Lenovo X13s arm64 laptops This package contains some default settings that are specific to Ubuntu running on Lenovo X13s arm64 laptops. Package: ubuntu-x13s-settings-nogrub Description-md5: 1432c83b57f77ea4878819ae8d023e15 Description-en: Default settings for Ubuntu on Lenovo X13s arm64 laptops This package contains some default settings that are specific to Ubuntu running on Lenovo X13s arm64 laptops which don't affect other hardware. Package: ubuntu-x1e-settings Description-md5: 6c2700268db9ab9e3e71e7e437dcebf6 Description-en: Default settings for Ubuntu on Qualcomm X Elite arm64 machines This package contains some default settings that are specific to Ubuntu running on Qualcomm X Elite arm64 laptops. Package: ubuntu-x1e-settings-nogrub Description-md5: 609713ba7be5ad24f7953de373022a8d Description-en: Default settings for Ubuntu installer media on Qualcomm X Elite This package contains some default settings that are specific to Ubuntu running on Qualcomm X Elite arm64 laptops which don't affect other hardware. Package: cpp-15-arm-linux-gnueabihf Description-md5: ed68a0d5b068e9ec1abe470407d0cbf5 Description-en: GNU C preprocessor for arm-linux-gnueabihf A macro processor that is used automatically by the GNU C compiler to transform programs before actual compilation. . This package has been separated from gcc for the benefit of those who require the preprocessor configured for arm-linux-gnueabihf architecture but not the compiler. Package: g++-15-arm-linux-gnueabihf Description-md5: 8217684381d0545df03fa8d52efefabb Description-en: GNU C++ compiler for arm-linux-gnueabihf architecture This is the GNU C++ compiler, a fairly portable optimizing compiler for C++. . This package contains C++ cross-compiler for arm-linux-gnueabihf architecture. Package: gcc-15-arm-linux-gnueabihf Description-md5: 33f90d4dfb358631d3e5a94e55aaa543 Description-en: GNU C compiler for the arm-linux-gnueabihf architecture This is the GNU C compiler for the arm-linux-gnueabihf architecture, a fairly portable optimizing compiler for C. Package: gfortran-15-arm-linux-gnueabihf Description-md5: 97ae8549d5e903133d4832ce451bf9d5 Description-en: GNU Fortran compiler for the arm-linux-gnueabihf architecture This is the GNU Fortran compiler for the arm-linux-gnueabihf architecture, which compiles Fortran on platforms supported by the gcc compiler. It uses the gcc backend to generate optimized code. Package: girepository-tools Description-md5: 30e6189aff1e855d202377408d2362b1 Description-en: Tools for working with GObject-Introspection repositories GLib is a library containing many useful C routines for things such as trees, hashes, lists, and strings. It is a useful general-purpose C library used by projects such as GTK, GIMP, and GNOME. . This package contains developer-oriented command-line tools for working with GObject-Introspection typelibs and GIR XML, which are used to provide language bindings and documentation for GLib-based libraries: . * arm-linux-gnueabihf-gi-compile-repository * arm-linux-gnueabihf-gi-decompile-typelib * arm-linux-gnueabihf-gi-inspect-typelib . When used via this package, these tools must be invoked with their host-architecture-specific names. . For command-line compatibility with non-Debian-based GLib packaging, the libglib2.0-dev package also provides versions of these tools for the system's primary architecture, named without the architecture prefix. Package: cpp-15-i686-linux-gnu Description-md5: b8282273c17bed5005498d3acc86c9d4 Description-en: GNU C preprocessor for i686-linux-gnu A macro processor that is used automatically by the GNU C compiler to transform programs before actual compilation. . This package has been separated from gcc for the benefit of those who require the preprocessor configured for i686-linux-gnu architecture but not the compiler. Package: g++-15-i686-linux-gnu Description-md5: 88bdc3f5d96144f5748dae6f61c62299 Description-en: GNU C++ compiler for i686-linux-gnu architecture This is the GNU C++ compiler, a fairly portable optimizing compiler for C++. . This package contains C++ cross-compiler for i686-linux-gnu architecture. Package: gcc-15-i686-linux-gnu Description-md5: ba5a678e8889d9e2f2dd41bf10f39ab5 Description-en: GNU C compiler for the i686-linux-gnu architecture This is the GNU C compiler for the i686-linux-gnu architecture, a fairly portable optimizing compiler for C. Package: gfortran-15-i686-linux-gnu Description-md5: b4cc25194ee0177ada8bf1a75e17c538 Description-en: GNU Fortran compiler for the i686-linux-gnu architecture This is the GNU Fortran compiler for the i686-linux-gnu architecture, which compiles Fortran on platforms supported by the gcc compiler. It uses the gcc backend to generate optimized code. Package: girepository-tools Description-md5: a002091dcd662b79e41bc703333c7261 Description-en: Tools for working with GObject-Introspection repositories GLib is a library containing many useful C routines for things such as trees, hashes, lists, and strings. It is a useful general-purpose C library used by projects such as GTK, GIMP, and GNOME. . This package contains developer-oriented command-line tools for working with GObject-Introspection typelibs and GIR XML, which are used to provide language bindings and documentation for GLib-based libraries: . * i686-linux-gnu-gi-compile-repository * i686-linux-gnu-gi-decompile-typelib * i686-linux-gnu-gi-inspect-typelib . When used via this package, these tools must be invoked with their host-architecture-specific names. . For command-line compatibility with non-Debian-based GLib packaging, the libglib2.0-dev package also provides versions of these tools for the system's primary architecture, named without the architecture prefix. Package: lib64asan8 Description-md5: 1a9f659ca4439e2038933f842e164011 Description-en: AddressSanitizer -- a fast memory error detector (64bit) AddressSanitizer (ASan) is a fast memory error detector. It finds use-after-free and {heap,stack,global}-buffer overflow bugs in C/C++ programs. Package: lib64atomic1 Description-md5: dcde910e366c584abcb0cd438bd4f06e Description-en: support library providing __atomic built-in functions (64bit) library providing __atomic built-in functions. When an atomic call cannot be turned into lock-free instructions, GCC will make calls into this library. Package: lib64gcc-14-dev Description-md5: 44d3aaff7c21b9d5950416cabd2035a0 Description-en: GCC support library (64bit development files) This package contains the headers and static library files necessary for building C programs which use libgcc, libgomp, libquadmath, libssp or libitm. Package: lib64gcc-15-dev Description-md5: 44d3aaff7c21b9d5950416cabd2035a0 Description-en: GCC support library (64bit development files) This package contains the headers and static library files necessary for building C programs which use libgcc, libgomp, libquadmath, libssp or libitm. Package: lib64gcc-s1 Description-md5: 3fa6e907907011d66479852df2d160b2 Description-en: GCC support library (64bit) Shared version of the support library, a library of internal subroutines that GCC uses to overcome shortcomings of particular machines, or special needs for some languages. Package: lib64gfortran-15-dev Description-md5: 552b8ddfa55fb97fed937c39ac7c9855 Description-en: Runtime library for GNU Fortran applications (64bit development files) This package contains the headers and static library files needed to build GNU Fortran applications. Package: lib64gfortran5 Description-md5: 46b19e07ae6f07ea3757b2684cf21c0d Description-en: Runtime library for GNU Fortran applications (64bit) Library needed for GNU Fortran applications linked against the shared library. Package: lib64go-14-dev Description-md5: a7ef5921b4b83cb852b9de565ed5fece Description-en: Runtime library for GNU Go applications (64bit development files) This package contains the headers and static library files needed to build GNU Go applications. Package: lib64go-15-dev Description-md5: a7ef5921b4b83cb852b9de565ed5fece Description-en: Runtime library for GNU Go applications (64bit development files) This package contains the headers and static library files needed to build GNU Go applications. Package: lib64go23 Description-md5: 07fa56d3e232224f82aa278bc1a968bd Description-en: Runtime library for GNU Go applications (64bit) Library needed for GNU Go applications linked against the shared library. Package: lib64go24 Description-md5: 07fa56d3e232224f82aa278bc1a968bd Description-en: Runtime library for GNU Go applications (64bit) Library needed for GNU Go applications linked against the shared library. Package: lib64gomp1 Description-md5: a0950cb11ce700192ac4d8252bba5f9e Description-en: GCC OpenMP (GOMP) support library (64bit) GOMP is an implementation of OpenMP for the C, C++, and Fortran compilers in the GNU Compiler Collection. Package: lib64itm1 Description-md5: fcc38020a0be9787c7556be2d025d1a4 Description-en: GNU Transactional Memory Library (64bit) GNU Transactional Memory Library (libitm) provides transaction support for accesses to the memory of a process, enabling easy-to-use synchronization of accesses to shared memory by several threads. Package: lib64quadmath0 Description-md5: 49289451e79bd744581e76fbb05eb94d Description-en: GCC Quad-Precision Math Library (64bit) A library, which provides quad-precision mathematical functions on targets supporting the __float128 datatype. The library is used to provide on such targets the REAL(16) type in the GNU Fortran compiler. Package: lib64stdc++-15-dev Description-md5: a197f2aec835e5fc6f8f76039d8a7c4e Description-en: GNU Standard C++ Library v3 (development files) This package contains the headers and static library files necessary for building C++ programs which use libstdc++. . libstdc++-v3 is a complete rewrite from the previous libstdc++-v2, which was included up to g++-2.95. The first version of libstdc++-v3 appeared in g++-3.0. Package: lib64stdc++6 Description-md5: 0b7bd88ae533336258d0ca3201397c0f Description-en: GNU Standard C++ Library v3 (64bit) This package contains an additional runtime library for C++ programs built with the GNU compiler. . libstdc++-v3 is a complete rewrite from the previous libstdc++-v2, which was included up to g++-2.95. The first version of libstdc++-v3 appeared in g++-3.0. Package: lib64ubsan1 Description-md5: c22f6718422baad4c7aa40c7b8c9e6ac Description-en: UBSan -- undefined behaviour sanitizer (64bit) UndefinedBehaviorSanitizer can be enabled via -fsanitize=undefined. Various computations will be instrumented to detect undefined behavior at runtime. Available for C and C++. Package: lib64z1 Description-md5: 0dd45789d18a8fd0926142096f194c66 Description-en: compression library - 64 bit runtime zlib is a library implementing the deflate compression method found in gzip and PKZIP. This package includes a 64 bit version of the shared library. Package: lib64z1-dev Description-md5: c784a26c44ed1278e3bcb4d1bf0aa9f5 Description-en: compression library - 64 bit - DO NOT USE EXCEPT FOR PACKAGING zlib is a library implementing the deflate compression method found in gzip and PKZIP. This package includes the development support files for building 64 bit applications. . This package should ONLY be used for building packages, users who do not need to build packages should use multiarch to install the relevant runtime. Package: libc6-amd64 Description-md5: 022f588c27f2c9d2908a07c0e916177e Description-en: GNU C Library: 64bit Shared libraries for AMD64 This package includes shared versions of the standard C library and the standard math library, as well as many others. This is the 64bit version of the library, meant for AMD64 systems. Package: libc6-dev-amd64 Description-md5: 4315f28f715f5adf117fa6a131d77331 Description-en: GNU C Library: 64bit Development Libraries for AMD64 Contains the symlinks and object files needed to compile and link programs which use the standard C library. This is the 64bit version of the library, meant for AMD64 systems. Package: cpp-15-powerpc64le-linux-gnu Description-md5: 2c7bd4237665c7473651107af2193fed Description-en: GNU C preprocessor for powerpc64le-linux-gnu A macro processor that is used automatically by the GNU C compiler to transform programs before actual compilation. . This package has been separated from gcc for the benefit of those who require the preprocessor configured for powerpc64le-linux-gnu architecture but not the compiler. Package: g++-15-powerpc64le-linux-gnu Description-md5: 0be28451d4d61c7a7c7261ee29e52e35 Description-en: GNU C++ compiler for powerpc64le-linux-gnu architecture This is the GNU C++ compiler, a fairly portable optimizing compiler for C++. . This package contains C++ cross-compiler for powerpc64le-linux-gnu architecture. Package: gcc-15-powerpc64le-linux-gnu Description-md5: 9a78fbda526c5f3157cb5ab0c3cf7fc1 Description-en: GNU C compiler for the powerpc64le-linux-gnu architecture This is the GNU C compiler for the powerpc64le-linux-gnu architecture, a fairly portable optimizing compiler for C. Package: gfortran-15-powerpc64le-linux-gnu Description-md5: c4e5fd95008e20fa21421f07aca27e28 Description-en: GNU Fortran compiler for the powerpc64le-linux-gnu architecture This is the GNU Fortran compiler for the powerpc64le-linux-gnu architecture, which compiles Fortran on platforms supported by the gcc compiler. It uses the gcc backend to generate optimized code. Package: girepository-tools Description-md5: e255a3a295093fe75b466c05d2c24dc8 Description-en: Tools for working with GObject-Introspection repositories GLib is a library containing many useful C routines for things such as trees, hashes, lists, and strings. It is a useful general-purpose C library used by projects such as GTK, GIMP, and GNOME. . This package contains developer-oriented command-line tools for working with GObject-Introspection typelibs and GIR XML, which are used to provide language bindings and documentation for GLib-based libraries: . * powerpc64le-linux-gnu-gi-compile-repository * powerpc64le-linux-gnu-gi-decompile-typelib * powerpc64le-linux-gnu-gi-inspect-typelib . When used via this package, these tools must be invoked with their host-architecture-specific names. . For command-line compatibility with non-Debian-based GLib packaging, the libglib2.0-dev package also provides versions of these tools for the system's primary architecture, named without the architecture prefix. Package: girepository-tools Description-md5: 0faf2a9a082ea04012e1b20cfc25cf4f Description-en: Tools for working with GObject-Introspection repositories GLib is a library containing many useful C routines for things such as trees, hashes, lists, and strings. It is a useful general-purpose C library used by projects such as GTK, GIMP, and GNOME. . This package contains developer-oriented command-line tools for working with GObject-Introspection typelibs and GIR XML, which are used to provide language bindings and documentation for GLib-based libraries: . * riscv64-linux-gnu-gi-compile-repository * riscv64-linux-gnu-gi-decompile-typelib * riscv64-linux-gnu-gi-inspect-typelib . When used via this package, these tools must be invoked with their host-architecture-specific names. . For command-line compatibility with non-Debian-based GLib packaging, the libglib2.0-dev package also provides versions of these tools for the system's primary architecture, named without the architecture prefix. Package: cpp-15-s390x-linux-gnu Description-md5: 15322c927af928619270877121b482b0 Description-en: GNU C preprocessor for s390x-linux-gnu A macro processor that is used automatically by the GNU C compiler to transform programs before actual compilation. . This package has been separated from gcc for the benefit of those who require the preprocessor configured for s390x-linux-gnu architecture but not the compiler. Package: g++-15-s390x-linux-gnu Description-md5: fafd9d967c83a64a002649a8dd459c79 Description-en: GNU C++ compiler for s390x-linux-gnu architecture This is the GNU C++ compiler, a fairly portable optimizing compiler for C++. . This package contains C++ cross-compiler for s390x-linux-gnu architecture. Package: gcc-15-s390x-linux-gnu Description-md5: 2323f276c14ea19238d792f7bdca46a5 Description-en: GNU C compiler for the s390x-linux-gnu architecture This is the GNU C compiler for the s390x-linux-gnu architecture, a fairly portable optimizing compiler for C. Package: gfortran-15-s390x-linux-gnu Description-md5: 01fdbbd9efb81f1ce24e9908283f9b07 Description-en: GNU Fortran compiler for the s390x-linux-gnu architecture This is the GNU Fortran compiler for the s390x-linux-gnu architecture, which compiles Fortran on platforms supported by the gcc compiler. It uses the gcc backend to generate optimized code. Package: girepository-tools Description-md5: 9457d74d33f52729ed78a4d6100ac8a4 Description-en: Tools for working with GObject-Introspection repositories GLib is a library containing many useful C routines for things such as trees, hashes, lists, and strings. It is a useful general-purpose C library used by projects such as GTK, GIMP, and GNOME. . This package contains developer-oriented command-line tools for working with GObject-Introspection typelibs and GIR XML, which are used to provide language bindings and documentation for GLib-based libraries: . * s390x-linux-gnu-gi-compile-repository * s390x-linux-gnu-gi-decompile-typelib * s390x-linux-gnu-gi-inspect-typelib . When used via this package, these tools must be invoked with their host-architecture-specific names. . For command-line compatibility with non-Debian-based GLib packaging, the libglib2.0-dev package also provides versions of these tools for the system's primary architecture, named without the architecture prefix.